Search Results for "classroom control software"
Sort By:
Showing 71 open source projects for "classroom control software"
View related business solutions-
MongoDB Atlas runs apps anywhereMongoDB Atlas gives you the freedom to build and run modern applications anywhere—across AWS, Azure, and Google Cloud. With global availability in over 115 regions, Atlas lets you deploy close to your users, meet compliance needs, and scale with confidence across any geography.
-
Build Data Resilience - Take the Assessment TodayIs your recovery strategy as strong as you think? Take this quick self-assessment to check your recovery readiness and gain tailored insights. In only 2 minutes, you'll learn where you fall on the recovery readiness scale.
-
1
Tasmota
Alternative firmware for ESP8266 with easy configuration
Alternative firmware for ESP8266 with easy configuration using webUI, OTA updates, automation using timers or rules, expandability and entirely local control over MQTT, HTTP, Serial or KNX. Unless your Tasmota powered device exhibits a problem or you need to make use of a feature that is not available in the Tasmota version currently installed on your device, leave your device alone - it works so don't make unnecessary changes! If the release version (i.e., the master branch) exhibits... -
2
Lenovo Legion Linux Support
Driver and tools for controlling Lenovo Legion laptops in Linux
Lenovo Legion Linux (LLL) brings additional drivers and tools for Lenovo Legion series laptops to Linux. It is the alternative to Lenovo Vantage or Legion Zone (both Windows only). It allows you to control features like the fan curve, power mode, power limits, rapid charging, and more. This has been achieved through reverse engineering and disassembling the ACPI firmware, as well as the firmware and memory of the embedded controller (EC). -
3
Lan Mouse
mouse & keyboard sharing via LAN
Lan Mouse is a mouse and keyboard-sharing software similar to universal control on Apple devices. It allows for using multiple PCs with a single set of mouse and keyboard. This is also known as a Software KVM switch. The primary target is Wayland on Linux but Windows MacOS and Linux on Xorg have partial support as well (see below for more details). Focus lies on performance and a clean, manageable implementation that can easily be expanded to support additional backends like e.g. ... -
4
Synergy Core
The keyboard and mouse sharing tool
This is the open source core component of Synergy, a keyboard and mouse sharing tool. Control your computers with one mouse and keyboard. Control multiple computers using only one keyboard and mouse. Focus on developing software, designing, gaming and remove time switching between operating systems. Throw away the extra keyboards and spend time where it really matters. Simplify your workspace by combining multiple computers into one. -
Earn up to 16% annual interest with Nexo.Put idle assets to work with competitive interest rates, borrow without selling, and trade with precision. All in one platform. Geographic restrictions, eligibility, and terms apply.
-
5
Blynk C++ Library
Blynk library for embedded hardware
Blynk is the most popular Internet of Things platform for connecting any hardware to the cloud, designing apps to control them, and managing your deployed products at scale. With Blynk Library you can connect over 400 hardware models (including ESP8266, ESP32, NodeMCU, all Arduinos, Raspberry Pi, Particle, Texas Instruments, etc.)to the Blynk Cloud. With Blynk apps for iOS and Android apps you can easily drag-n-drop graphic interfaces for any DIY or commercial project. It's a pure WYSIWG... -
6
Arduino FOC
Arduino FOC for BLDC and Stepper motors
We live in very exciting times 😃! BLDC motors are entering the hobby community more and more and many great projects have already emerged leveraging their far superior dynamics and power capabilities. BLDC motors have numerous advantages over regular DC motors but they have one big disadvantage, the complexity of control. Even though it has become relatively easy to design and manufacture PCBs and create our own hardware solutions for driving BLDC motors the proper low-cost solutions are yet... -
7
Betaflight
Open Source Flight Controller Firmware
Betaflight is flight controller software (firmware) used to fly multi-rotor craft and fixed wing craft. This fork differs from Baseflight and Cleanflight in that it focuses on flight performance, leading-edge feature additions, and wide target support. Betaflight supports a wide range of flight controllers with at least an STM32F4 MCU. You can use nearly any piece of modern hardware out there. -
8
NeoPixelBus
An Arduino NeoPixel support library
An Arduino NeoPixel support library supports a large variety of individually addressable LEDs. Please refer to the Wiki for more details. Please use the gitter channel to ask questions as the GitHub Issues feature is used for bug tracking. A library to control one wire protocol RGB and RGBW LEDs like APA106, SK6812, WS2811, WS2812, and WS2813 that are commonly referred to as NeoPixels and two-wire protocol RGB like Lpd8806, APA102, and SK9822 commonly referred to as DotStars. Supports most... -
9
IPMI Management Utilities
Manage and interpret IPMI systems with common a software tool
ipmiutil is an easy to use set of IPMI server management utilities. It can get/set sensor readings & thresholds, automate SEL management, do SOL console, etc. Supports Linux, Windows, BSD, Solaris, MacOSX. The only IPMI project tool that runs natively on Windows. See ipmiutil.sf.net for rpms, etc. (formerly called panicsel). It can run driverless in Linux for use on boot media or embedded environments. -
AI-generated apps that pass security reviewRetool lets you generate dashboards, admin panels, and workflows directly on your data. Type something like “Build me a revenue dashboard on my Stripe data” and get a working app with security, permissions, and compliance built in from day one. Whether on our cloud or self-hosted, create the internal software your team needs without compromising enterprise standards or control.
-
10
GeigerLog
Python program for Geiger counters and Environmental Sensors
GeigerLog is a combination of data logger, presenter, and analyzer, and is now released in version 2.1! Based on Python (Version 3), it runs on Linux, Windows, Macs, Raspberry Pi, and other. GeigerLog is WiFi-enabled for servers and clients; it can be monitored by SmartPhone. Initially developed for Geiger counters, it is now a more universal tool, which equally well handles data like temperature, air-pressure, humidity, CO2. Continues to support Geiger counters like GQ Electronic's... -
11
kmicommbusmediator
"KMI Comm. Bus Mediator"
...Bus Mediator" ("kmicommbusmediator") The project "kmicommbusmediator" provides connectivity for the "Raspberry Pi 4 Model B" and "Raspberry Pi 5" to the "PPG Communication Bus" which is used by PPG devices such as the "Wave 2.2", "Wave 2.3", "EVU", "PRK", "Waveterm A", "Waveterm B". "kmicommbusmediator" contains hardware and software components: * "kmicommbusmediator-HW": "Comm. Bus" hardware-interface * "CBMEDIBIOS": firmware for "kmicommbusmediator-HW" * "cbmedimonitor": control tool for "Raspberry Pi" Utilities: "wtafloppylist", "wtbfloppylist", ... Copyright (C) 2022-2026 by Klaus Michael Indlekofer. All rights reserved. Note: Special restrictions apply. ... -
12
DarkLight Cover/Calibrator
DIY project to build a cover, flat panel or combo flip-flat panel
The DarkLight Cover/Calibrator (DLC) is a DIY project to build a motorized telescope cover, flat panel, or a combination flip-flat system. Its modular design supports various setups: a 12V light panel without a servo for a wall-mounted calibration panel, a servo-only cover for sky flats, or both integrated into a flip-flat mechanism. The DLC also includes optional dew heating to reduce extra equipment and cabling. With available drivers, it works with ASCOM or INDI. We’re excited to... -
13
Arduino Nano Dew Controller Pro (DIY)
Dew Controller Feature Rich
A 3-channel fully automated Dew Controller (DIY project) based on Arduino Nano for telescopes. For $48 or less. (c) Copyright Robert Brown 2014-2025. All Rights Reserved. Permission is granted for personal and Academic use only. Code or portions of code may not be copied or used without appropriate credit given to author. A very popular project with over 48,000 downloads. There is a new ESP32 WiFi version at https://sourceforge.net/projects/esp32-dew-controller/ The older... -
14
CommBusTerm
"CommBusTerm"
"CommBusTerm" is based on a "Raspberry Pi 4 Model B" or "Raspberry Pi 5", and the "kmicommbusmediator" interface, which provides connectivity to the "PPG Communication Bus" which is used by PPG synthesizers such as the "Wave 2.2", "Wave 2.3", "EVU". Hardware: * "kmicommbusmediator": https://sourceforge.net/projects/kmicommbusmediator/ * "kmiwaveram": https://sourceforge.net/projects/kmi-wave-ram/ Software: * "cbmedimonitor" control tool * "WaveProgEdit" sound-program editor * "WaveBackup" for backups * "waveaddsynth" for additive synthesis * "wavetransientutil" for transient sounds Copyright (C) 2022-2026 by Klaus Michael Indlekofer. All rights reserved. Note: Special restrictions apply. See disclaimers below and within the distribution. ... -
15
Arduino ASCOM Focuser Pro DIY
Arduino Focuser, fully ASCOM complaint
myFocuserPro is an ASCOM and Moonlite compatible stepper motor telescope focus controller (DIY) based on Arduino Nano/Uno. A popular DIY ASCOM focuser with more than 121,000+ downloads. (c) Copyright Robert Brown 2014-2024. All Rights reserved. Permission is granted for personal and Academic use only. Spreadsheet to calculate what stepper motor to use. https://sourceforge.net/projects/arduinoascomfocuserpro2diy/files/Documentation/Nema-Stepper-Motors.xlsx/download -
16
xBridge - I2C/SMBus GUI
USB Bridge for SMBus/I2C, GPIO, & Clock
[Introduction] The xBridge-M01 product is a multifunctional USB bridge developed by Doidx. It can control and transmit SMBus/I2C, GPIO, Clock and other interfaces through USB. The product includes software and hardware. It has the characteristics of easy use and development. The core chip is CP2112 Graphical software and operating manual can be downloaded for free at http://xbridge-m01.doidx.com Provide the underlying Java API, http://xsmbus-m01.doidx.com , which can do simple testing and develop user-specific graphical interface products. ... -
17
SmartKnob
Haptic input knob with software-defined endstops and virtual detents
SmartKnob is an open‑source hardware/software hybrid rotary input device featuring software-configurable end-stops and virtual detents, facilitated by a brushless gimbal motor and magnetic encoder—offering programmable haptic feedback and a novel, tactile user interface. 240x240 round LCD ("GC9A01"), protected by 39.5mm watch glass on rotor. BLDC gimbal motor, with a hollow shaft for mechanically & electrically connecting the LCD. PCB flexure and SMD resistors used as strain gauges for press... -
18
CameraController
Control USB Cameras from an app
Control your camera's settings without using the software provided (or not) by the company. -
19
Barrier
Open-source KVM software
Barrier is a software that works just like a KVM (keyboard, video and mouse) switch, which allows you to use a single mouse and keyboard to control several different computers by physically turning a dial on the box to switch the machine you're controlling at any given time. Barrier is able to do this in software, giving you control over different machines by simply moving your mouse to the edge of the screen, or by using a keypress to switch focus to a different system. ... -
20
TeLOS Linux
humbly smart Operating System - Debian derivative
TeLOS is a new, universal Linux distribution, a carefully customized derivative of Debian bullseye / sid with KDE Plasma Desktop Environment featuring an unbiased selection of useful applications and services. You may find TeLOS Linux to be snappy, lightweight, ready for work or fun straight out of the box and easily configurable. This Operating System is freely distributed and honors free, open source software development. Nevertheless, some non-free proprietary packages are included to... -
21
RaspberryLight
Make your Raspberry Pi to a Wi-Fi controllable LED Light
Make your Raspberry Pi to a Wi-Fi controllable LED Light using LED stripes with WS 2811 controller. This software enables the raspberry to provide a web server interface (HTTP / Rest) for controlling the connected LED stripe. That project bases on the WiringPi lib, Indy for Lazarus and also on the Tinkerforge bindungs for Lazarus. The Stripe must be connected with the Tinkerforge Masterbrick and the LED-Stripe bricklet. WiringPi is used to control the GPIOs for some feature and Indy (Internet Direct) is used to support all network feature like UDP-broadcasting and handling the HTTP-requests. ... -
22
Footcontroller
Control your Linux PC with a standard foot pedal
...Many foot pedals come with software, often MS Windows only, which allows you to program the pedals to perform some function or other, Footcontroller does away with the proprietary software and allows you to define multiple sets of commands that can be swapped in or out at the click of a button. The advantage is that now, your foot pedal can perform different tasks in multiple situations simply by selecting the appropriate pedal set, rather than having to re-program the foot pedal from scratch. -
23
footmouse
Allows Linux users to use a HID compatible USB foot pedal as a mouse
The foot pedal emulates a mouse in conjunction with up to 4 modifier keys, ALT, CONTROL, SHIFT and ESCAPE. Functions available are Left Click, Double Click, Right Click, Cursor Up, Cursor Down, Cursor Left, Cursor Right, Wheel Scroll Up, Wheel Scroll Down, Middle Click, Page Up, Page Down, Window Select, Close window, Minimise window and Null (define an option that does nothing) - Many foot pedals come with software, often MS Windows only, which allows you to program the pedals to perform some function or other, Footmouse does away with the proprietary software and allows you to assign Mouse commands to a pedal or a pedal with a modifier key. ... -
24
deej
Set app volumes with real sliders! Arduino project to build hardware
deej is an open-source hardware volume mixer for Windows and Linux PCs. It lets you use real-life sliders (like a DJ!) to seamlessly control the volumes of different apps (such as your music player, the game you're playing and your voice chat session) without having to stop what you're doing. Control your microphone's input level. Lightweight desktop client, consuming around 10MB of memory. Runs from your system tray. Helpful notifications to let you know if something isn't working. The... -
25
ESP8266 USB Software Driver
Software-only ESP8266 USB Device
ESPUSB is a software-only USB device stack that adds low-speed USB capability to ESP8266 and ESP8285 microcontrollers. It implements the USB protocol primarily in software instead of relying on dedicated USB hardware. The design needs only a small amount of external circuitry and uses adjacent GPIO pins for the D+ and D- signals. It operates at USB low speed, making it suitable for human-interface devices and control-oriented peripherals.
