Search Results for "100"

A 3-channel fully automated Dew Controller (DIY project) based on Arduino Nano for telescopes. For $48 or less. (c) Copyright Robert Brown 2014-2025. All Rights Reserved. Permission is granted for personal and Academic use only. Code or portions of code may not be copied or used without appropriate credit given to author. A very popular project with over 48,000 downloads. There is a new ESP32 WiFi version at https://sourceforge.net/projects/esp32-dew-controller/ The older...

Timid Touch is a touchscreen calibrator and an input daemon for Linux distributions with the X Window System on board. It bypasses xinput/libinput entirely, reads device events directly and sends adjusted coordinates to X11. Timid Touch aims to replace [xinput_calibrator], which no longer works (since [libinput] broke everything) and allows to calibrate multiple monitors with touch panels easily.

[Introduction] The xBridge-M01 product is a multifunctional USB bridge developed by Doidx. It can control and transmit SMBus/I2C, GPIO, Clock and other interfaces through USB. The product includes software and hardware. It has the characteristics of easy use and development. The core chip is CP2112 Graphical software and operating manual can be downloaded for free at http://xbridge-m01.doidx.com Provide the underlying Java API, http://xsmbus-m01.doidx.com , which can do simple...

[Introduction] xSmbus-m01 is not only a Java API, but also a program that can be executed separately. The following are its function options: Need to be executed at the command prompt, java -jar /YourPath/xSmbus-m01-1.0p.jar Help - list the parameter table Verification - verify that the product is working properly Test - used for system maintenance, in advance Check - determine if there is a device on the I2C location Scan - search in the range of 00-FF, search out on the I2C bus...

...It allows the driver successfully run on ARM making it send the correctly aligned requests for DMA. Tested on Android 4.2.2 (Linux 3.0.36) with DesignWare USB 2.0 OTG Controller (DWC_OTG). Supported USB to Ethernet adapters: 3Com, AboCom (10/100 and HPNA), Accton/SMC (some models), ADMtek, AEI, Allied Telesyn, ATEN, Belkin (some models), Billionton, Corega FEther, D-Link (some models), EasiDock, ELECOM, Elsa Micolink, Gigabyte GN-BR402W Wireless Router, GOLDPFEIL, Hawking, Hewlett-Packard HN210C, IO DATA, Compaq iPAQ Networking, Kingston KNU101TX Ethernet, LANEED, Linksys, MELCO/BUFFALO, Microsoft MN-110, NETGEAR FA101, OCT, Philips USB 10/100 Ethernet, smartNIC 2 PnP Adapter, SOHOware NUB100/NUB110 Ethernet, SpeedStream USB 10/100 Ethernet

OpenSOC86 is an open implementation of the x86 architecture in Verilog. The current version only implements the 16-bit part (real mode). The processor is a pipelined architecture clocked at 100 MHz in a Cyclone II speed grade -6. Therefore it can be seen as similar to a 486 in real mode. Several peripherals are also implemented in a somewhat minimalistic way, but enough to be able to boot an IBM PCXT compatible bios and MSDOS 6.22. The current implementation is only proven to boot the bios and DOS in simulation. The system is targeted to run on the DE2-70 board. ...

The JavaBluetooth Stack is a 100% Java implementation of the Bluetooth Specifications Version 1.1. It uses the javax.comm package to address the Bluetooth chip, and implements the JSR-82 (javax.bluetooth) API. Deployment on TINI is possible.

This is for development of the ide-floppy driver for the Linux Kernel. I am monitoring the linux-kernel mailing list and the alt.os.linux.hardware newsgroup. This driver supports at least ATAPI ZIP 100/250, LS-120 Superdisk and Iomega Clik!/PocketZip.

This project is for the Device Drivers and user-space tools for the <a href= http://www.centurion-cd.com/product-dischub.html>Centurion DiscHub.</a>. The device is a 100 CD+-RW/DVD+-RW/DVD-RAM drive with a robotic 100 Disc changer.