Search Results for "100"

A 3-channel fully automated Dew Controller (DIY project) based on Arduino Nano for telescopes. For $48 or less. (c) Copyright Robert Brown 2014-2025. All Rights Reserved. Permission is granted for personal and Academic use only. Code or portions of code may not be copied or used without appropriate credit given to author. A very popular project with over 48,000 downloads. There is a new ESP32 WiFi version at https://sourceforge.net/projects/esp32-dew-controller/ The older...

QuickMAN is a Mandelbrot fractal generator with multicore support. ASM-optimized code can reach over 100 billion iterations per second. Features an easy-to-use GUI, realtime pan/zoom, multiple palettes, image logging, and saving in PNG format.

Timid Touch is a touchscreen calibrator and an input daemon for Linux distributions with the X Window System on board. It bypasses xinput/libinput entirely, reads device events directly and sends adjusted coordinates to X11. Timid Touch aims to replace [xinput_calibrator], which no longer works (since [libinput] broke everything) and allows to calibrate multiple monitors with touch panels easily.

[Introduction] The xBridge-M01 product is a multifunctional USB bridge developed by Doidx. It can control and transmit SMBus/I2C, GPIO, Clock and other interfaces through USB. The product includes software and hardware. It has the characteristics of easy use and development. The core chip is CP2112 Graphical software and operating manual can be downloaded for free at http://xbridge-m01.doidx.com Provide the underlying Java API, http://xsmbus-m01.doidx.com , which can do simple...

libusbK is a complete driver/library solution for vendor class usb device interfaces. If you are a usb developer or usb device manufacturer seeking a driver solution for a new USB widget then libusbK could be for you. libusbK encompasses a 100% WinUSB compatible api/funtion set. All WinUSB power/pipe polices are fully supported by the libusbK driver. In Addition, libusbK has full support for isochronous endpoints and an extensive set of additional modules to simplify development. Source code repository using github: https://github.com/mcuee/libusbk

[Introduction] xSmbus-m01 is not only a Java API, but also a program that can be executed separately. The following are its function options: Need to be executed at the command prompt, java -jar /YourPath/xSmbus-m01-1.0p.jar Help - list the parameter table Verification - verify that the product is working properly Test - used for system maintenance, in advance Check - determine if there is a device on the I2C location Scan - search in the range of 00-FF, search out on the I2C bus...

...The indicator has been replaced with an Arduino controlled RGB led. Core Temp is required and the Arduino code requires the CMD Messenger library. This software is in beta, and not 100% completed yet.

...It allows the driver successfully run on ARM making it send the correctly aligned requests for DMA. Tested on Android 4.2.2 (Linux 3.0.36) with DesignWare USB 2.0 OTG Controller (DWC_OTG). Supported USB to Ethernet adapters: 3Com, AboCom (10/100 and HPNA), Accton/SMC (some models), ADMtek, AEI, Allied Telesyn, ATEN, Belkin (some models), Billionton, Corega FEther, D-Link (some models), EasiDock, ELECOM, Elsa Micolink, Gigabyte GN-BR402W Wireless Router, GOLDPFEIL, Hawking, Hewlett-Packard HN210C, IO DATA, Compaq iPAQ Networking, Kingston KNU101TX Ethernet, LANEED, Linksys, MELCO/BUFFALO, Microsoft MN-110, NETGEAR FA101, OCT, Philips USB 10/100 Ethernet, smartNIC 2 PnP Adapter, SOHOware NUB100/NUB110 Ethernet, SpeedStream USB 10/100 Ethernet

OpenSOC86 is an open implementation of the x86 architecture in Verilog. The current version only implements the 16-bit part (real mode). The processor is a pipelined architecture clocked at 100 MHz in a Cyclone II speed grade -6. Therefore it can be seen as similar to a 486 in real mode. Several peripherals are also implemented in a somewhat minimalistic way, but enough to be able to boot an IBM PCXT compatible bios and MSDOS 6.22. The current implementation is only proven to boot the bios and DOS in simulation. The system is targeted to run on the DE2-70 board. ...

Displays battery charge indicator in the system tray. NOTE: 1) Requires Visual C++ 2010 run-time environment installed. You can get it here: http://www.microsoft.com/en-us/download/details.aspx?id=5555 2) 100% charge shown as 99%, because there is two digit positions. 3) Status icon updates every 30 seconds. There is no way to change this interval other than re-compile source code. 4) Tested on Windows XP SP3. Works perfectly. If you have any troubles using this software, please contact me via e-mail immediately.

EmfPrinter is a virtual printer driver for Microsoft Windows which allows you to print documents as EMF/WMF vector images or to more than 100 raster formats (JPEG,PNG,BMP,etc). Document conversion has never been easier!

Hardware acceleration support for the ATI IMAGEON 100 graphic card.

The JavaBluetooth Stack is a 100% Java implementation of the Bluetooth Specifications Version 1.1. It uses the javax.comm package to address the Bluetooth chip, and implements the JSR-82 (javax.bluetooth) API. Deployment on TINI is possible.

This is for development of the ide-floppy driver for the Linux Kernel. I am monitoring the linux-kernel mailing list and the alt.os.linux.hardware newsgroup. This driver supports at least ATAPI ZIP 100/250, LS-120 Superdisk and Iomega Clik!/PocketZip.

This project is for the Device Drivers and user-space tools for the <a href= http://www.centurion-cd.com/product-dischub.html>Centurion DiscHub.</a>. The device is a 100 CD+-RW/DVD+-RW/DVD-RAM drive with a robotic 100 Disc changer.