Search Results for "design" - Page 2

PUB! is a Programmable USB Button on which you can program with a sequence of keystrokes. When you press the button those keystrokes are "replayed" over a USB connection. The button is programmed using an innovative and slightly quirky interface that does not require any custom software to be installed on your computer. All you need is a text editor like Notepad or gedit.

Small universal tool for handling USART STM32 bootloader. Works with all STM32 family devices (also with newest STM32F4 and STM32F0). Dedicated especially for Linux users. Works in shell. There are plans to make a GUI overlay.

JNode is a Java New Operating system Design Effort. JNode is a simple to use and install Java operating system for personal use on modern devices. Any java application runs on it, fast and safe. See our homepage for additional information.

This HTML utility allows the user to select standard color codes or surface mount numbers, then it identifies the resistor value. There is no need to memorize color codes or multipliers. An online working example of this program can be used at ZoomAviation.com/programs.

An API for manipulating EDIF netlists in Java. We use this API to analyze netlists as a part of our FPGA reliability project. We intend to keep the API as general as possible to support other netlist analysis and manipulation activities. This material is based upon work supported by the National Science Foundation under Grant No. 0801876. Any opinions, findings, and conclusions or recommendations expressed in this material are those of the author(s) and do not necessarily reflect the...

We provide MATLAB and Verilog Models of GeAr, and previously proposed adders (ACA-I, ETAII, ACA-II and GDA) at http://sourceforge.net/projects/approxadderlib/ GeAr is a low latency Generic Accuracy Configurable Adder that provides a higher number of potential configurations compared to state-of-the-art approximate adders, thus enabling a high degree of flexibility and trade-off between performance and output quality. These MATALB and Verilog models can allow software programmer as well as hardware designers to evaluate their code and design. To the best of our knowledge, this is the first open-source library of approximate adders that facilitates reproducible comparisons and further research and development in this direction across various layers of design abstraction. This work is a result of collaborative effort between Chair for Embedded Systems (CES) at Karlsruhe Institute of Technology (KIT), Germany and Vision Image and Signal Processing (VISpro) Lab at SEECS-NUST, Pakistan.

This (Python) tool allows you to easily create FPGA bitfiles for your embedded system, from several Open Source IPs (compatibles with the OpenCores Wishbone bus) . It will also generates the corresponding drivers (currently only Linux ones).

TxEngine is an embedded controller engine designed to allow one to make supervision & control program that fit in embedded systems. Include a modular design with native support for Modbus RTU, timers, threads, linked lists

Relacy is a framework for agent-oriented programming in C++. Agents are autonomous objects, they interact fully asynchronously with messages. Relacy provides means for defining user agents and messages, as well as runtime system.

This program is a cross-platform replacement for the widely known in close circles Parameter Design tool (also known as Keywin e-Bike Lab), used to set the parameters of a e-bike controller based on the Infineon XC846 microcontroller (and various clones).

Software and Arduino shield design for a Serial-to-HID device such that old serial gaming devices can be used as USB Hid devices, particularly the SpaceOrb360 and Spaceball 3d CAD devices.

...Features: * 5-port router for mesh network (0 south, 1 west, 2 north, 3 east, 4 local) * The dimension order routing (XY routing) * Available flow control methods: wormhole, SDM, VC * Reconfigurable number of virtual circuits, buffer size, data width * Fully synthesizable router implementation * SystemC testbench provided Languages: * Routers are written in synthesizable SystemVerilog * Test benches are provided by SystemC Software requirements: * The open source Nangate 45nm cell library * Synopsys Design Compiler (Synthesis) * Cadence IUS -- NC Simulator (for SystemC/Verilog co-simulation)

The goal of the See&Touch project is to design/implement a special mouse for disabled people, which allows a person to fully control a computer by using just vision and one single body movement. This project develops hardware, firmware and software.

FpgaC compiles a subset of the C language to net lists which can be imported into an FPGA vendors tool chains. C provides an excellent alternative to VHDL/Verilog for algorithmic expression of FPGA reconfigurable computing tasks. More info in wiki.

The OCCN project enhances SystemC2.0+ modeling by developing C++ classes for modeling user-defined or system-specific, point-to-point or multiaccess inter-module communication channels (or future network-on-chip) at various abstraction levels. To reference this work: M. Coppola, S. Curaba, M.D. Grammatikakis, R. Locatelli, G. Maruccia, and F. Papariello, "OCCN: a NoC modeling framework for design exploration", Design Automation in Europe Conf. (DATE), 2004, pp. 174--179. Available from Available from http://citeseerx.ist.psu.edu/viewdoc/download?doi=10.1.1.138.1281&rep=rep1&type=pdf

Java library that interfaces with "The USB INSTEON PowerLinc Controller" built by Smartlabs Design. This library is built on top of the javax.usb linux reference implementation, but should work under Windows as well.

The pycurry project is targeted for handling concurrency issues within the Python programming language. It also contains a (almost) fully functional 'Design by Contract' implementation.

The primary aim of this project is to develop a full featured Microblaze simulator . The project is develloped only in C , then it can be easely ported.

The HDL Complexity Tool parses large complex hardware projects' source code to produce useful complexity results. GOALS: 1)Practical, effective and simple 2) Integrates with existing design flows 3) Used on real projects 4) Based on existing research

OpenVGA is an free and open FPGA-based implementation of a VGA compatible graphics adapter, and utilising low-cost hardware. The project includes the PCB schematic and artwork, Verilog HDL, firmware assembly code, and driver source code.

The objectives of OCERA is the design and implementation of a library of free software components for the design of embedded real-time systems. These components will be used to create flexible, configurable, robust and portable embedded applications.

ULLA allows developers of network aware applications to access data from device drivers similar to the Wireless Extensions on Linux. However, its new design simplifies the API syntax and expands the access to all wireless technologies such as GSM, BT.

The purpose of the Programmable Chip EEG BCI project is to create a EEG that is modernized with some of the latest hardware. The Design uses lower amplification and higher bit analog to digital converters to remove the need for filtering and amplifying.

A Verilog design for a simple ASIC that executes the Ray Tracing Algorithm.

libhdlfltp is a VHDL library of floating point operators, all of which are parametrized, synthesizable to FPGAs and cover a number of the core operators in math.h.