Search Results for "linux command"

BRL-CAD is a powerful cross-platform constructive solid geometry solid modeling system that includes an interactive geometry editor, ray-tracing for rendering & geometric analyses, network distributed framebuffer support, image & signal-processing tools.

CB2XML (CopyBook to XML) is a COBOL CopyBook to XML converter written in Java and based on the SableCC parser generator. This project includes utilities to convert an XML instance file into its COBOL copybook equivalent string buffer and vice versa. Source is now available in GitHub: https://github.com/bmTas/cb2xml

A new 64-bit RISC platform, complemented by a set of development tools, standards specifications and synthesizable VHDL implementations.

JxMake is a Java-based, cross-platform build system primarily inspired by the syntax and features of GNU Make, Perforce Jam, and CMake. In addition, JxMake provides several capabilities not typically found in other console-based build systems, including a built-in lightweight GUI, serial console, serial plotter, multi-MCU in-system programmer, and more. Currently, JxMake's loadable libraries (build scripts) are primarily designed for non-OS MCU systems and experimental use. Full...

[Introduction] The xBridge-M01 product is a multifunctional USB bridge developed by Doidx. It can control and transmit SMBus/I2C, GPIO, Clock and other interfaces through USB. The product includes software and hardware. It has the characteristics of easy use and development. The core chip is CP2112 Graphical software and operating manual can be downloaded for free at http://xbridge-m01.doidx.com Provide the underlying Java API, http://xsmbus-m01.doidx.com , which can do simple...

[Introduction] xSmbus-m01 is not only a Java API, but also a program that can be executed separately. The following are its function options: Need to be executed at the command prompt, java -jar /YourPath/xSmbus-m01-1.0p.jar Help - list the parameter table Verification - verify that the product is working properly Test - used for system maintenance, in advance Check - determine if there is a device on the I2C location Scan - search in the range of 00-FF, search out on the I2C bus...

JNode is a Java New Operating system Design Effort. JNode is a simple to use and install Java operating system for personal use on modern devices. Any java application runs on it, fast and safe. See our homepage for additional information.

An API for manipulating EDIF netlists in Java. We use this API to analyze netlists as a part of our FPGA reliability project. We intend to keep the API as general as possible to support other netlist analysis and manipulation activities. This material is based upon work supported by the National Science Foundation under Grant No. 0801876. Any opinions, findings, and conclusions or recommendations expressed in this material are those of the author(s) and do not necessarily reflect the...

This program shows the packets in a USB communication, by decoding the output of a command like "cat /sys/kernel/debug/usb/usbmon/0u" into more human-readable form

An application that can connect an collect data from vPro machines over network. It uses web-services for communication and works with machines that has AMT version >= 3.0

A Linux program/library for interfacing the Velleman k8055 USB I/O board

cobol2j reads or writes COBOL or RPG data files imported from mainframes, AS/400 or Baby/36 environment. Packed decimal, zoned or packed date fields decoding included. EBCDIC conversion. ETL ISAM data to any other platform. PC Cobol ( ASCII ) supported.

X10 device drivers for Linux creating a /dev device for each X10 unit in the house. This allows command line, script, and program access to the X10 network.This driver currently supports the PowerLinc Serial, PowerLinc USB, and CM11A.

TopScribe is a cross-platform utility to view TOP/NOTES files and convert them to SVG. TOP files are created by the Tevion/Medion MD85276 digital notepad, or WALTOP\'s Digital Ink Pad.

URBI: Universal Robotic Body Interface. URBI is a scripted command language used to control robots (AIBO, pioneer,...). It is a robot-independant API based on a client/server architecture. Liburbi C++/Java/Matlab are available here. Forum available at ht

A set of pure java drivers, libraries and applications for interacting with X10 devices.

LibSeris is a set of common code for controlling the Seris class of inexpensive personal robots, also created by this project.