Search Results for "mp.3"

iWattnick aims to be a top-class computer for e-bikes, e-scooters, e-motorcycles. It is equipped with a large B/W screen, two buttons, accelerometer, magnitometer, current and voltage sensors, light sensor, internal temperature sensor, battery-backed real-time clock, a buzzer and has connection ports for external speed sensor (motor Hall, phase or reed switch), a Bluetooth SPP dongle, up to three temperature sensors (TMP36, LM35, KTY83 etc), cadence sensor, throttle handle, output to controller...

JNode is a Java New Operating system Design Effort. JNode is a simple to use and install Java operating system for personal use on modern devices. Any java application runs on it, fast and safe. See our homepage for additional information.

We provide MATLAB and Verilog Models of GeAr, and previously proposed adders (ACA-I, ETAII, ACA-II and GDA) at http://sourceforge.net/projects/approxadderlib/ GeAr is a low latency Generic Accuracy Configurable Adder that provides a higher number of potential configurations compared to state-of-the-art approximate adders, thus enabling a high degree of flexibility and trade-off between performance and output quality. These MATALB and Verilog models can allow software programmer as well as...

A cross platform GUI configuration tool for Ciseco XRF radio devices accessed over serial or USB. This product is produced independently from Ciseco, and carries no guarantee from Ciseco about quality, suitability or anything else. The supplier of this product assumes all responsibility for it.

usbpicprog is a Microchip PIC programmer with simple hardware: one PIC18F2550 and some components. It's therefore easy and cheap to build. Usbpicprog consists of 3 components: Hardware, Embedded software and a stand-alone program for Win, Mac and Linux.

Emulation of iso to cd using external usb storage, Portable usb cdrom library.

This is a sketch for Arduino that allows for the user to have multiple sketches on their Arduino, and then switch between them. For a video go to (coming soon). Requires Arduino 0022 or later to use get Arduino here: www.arduino.cc

Dioscuri is an x86 computer hardware emulator written in Java. It is designed by the digital preservation community to make sure that documents and programs from the past can still be accessed in the future. Dioscuri is durable and component-based.

FoxController is a cross-platform application wich allows to control etherogeneous devices through a general pupose web service interface. FoxController uses a plug-in architecture in order to implement the low level communication with the devices

OSlash is a c++ framework for developing decentralized cloud computing services. It includes a programming environment and virtual machine for assembling networks of processing nodes coordinate their operations through message passing.

Schematics and micro-controller code for a version of the scoring apparatus used in competitive fencing and a compatible remote control.

The UniLog is a small onboard data logging device for rc models. It records stuff like current, voltage, rpm, height, airspeed... python-unilog is to retrieve the data and do what you want with it.

This program was born as a parody of another *-Z utilities like CPU-Z or GPU-Z. It shows some basic information about OpenCL-enabled GPUs and CPUs.

Control and automation software for the home environment. Written in Java for OS-independence, it also aspires to be multi-protocol (X10, Insteon, Zigbee, etc), and multi-channel (Swing clients, web, J2ME, etc). A home 'operating system'.

Automate the management of Cisco switches out-of-band (OOB) for extra security and reliability. Uses serial ports; version 2 is thread-safe and supports multiple switches.

OpenVGA is an free and open FPGA-based implementation of a VGA compatible graphics adapter, and utilising low-cost hardware. The project includes the PCB schematic and artwork, Verilog HDL, firmware assembly code, and driver source code.

zpm(c) is a Java client cooperating with database tables created by zpmd (z/VM Performance Monitor Daemon) software. It presents system usage and actual events.

This is an opensource project for the calculation of the mathematical constant Pi. If you are a mathematician or programer please contribute ideas or code for this project. Non professionals are also welcome to contribute.

SSEPlus is a SIMD function library. It provides optimized emulation for newer SSE instructions. It also provides a rich set of high performance routines for common operations such as arithmetic, bitwise logic, and data packing and unpacking.

A portable library for small monochrome graphics displays. We support most popular controllers for LCDs, VFDs, OLEDs, and ELs.

OpenBeanPie intends to implement an integration with BeanShell Java Interpreter and a little abstraction/simplification layer over WiiRemoteJ in order to obtain an interpreter for scripts that control Nintendo's Wiimotes behaviour.

TopScribe is a cross-platform utility to view TOP/NOTES files and convert them to SVG. TOP files are created by the Tevion/Medion MD85276 digital notepad, or WALTOP\'s Digital Ink Pad.

unPIC is a Perl script that disassembles Microchip microcontroller's HEX files. This is a powerful tool for all reverse engeneers that creates a well understandable assembly source from a binary file. Creates xrefs, labels, subroutines and much more...

TagCentric is RFID middleware that controls heterogeneous RFID devices and gathers RFID-related data into a user-specified database. It's cost (free!) and simplicity make it ideal for use by small businesses, RFID testing facilities, and universities.

The SBus is a family of high-speed packet-based databus standards, suitable for both networking and interdevice communication. They are optimized for high data density transactions. This project creates and documents the standards, schematics, and driver