Search Results for "wireless"

Asuswrt-Merlin is a third party firmware for select Asus wireless routers. Based on the Asuswrt firmware developed by Asus, it brings tweaks, new features and other improvements to the original firmware, while retaining its performance and ease of use. Note that only downloads are hosted on SF.net - the complete source code can be found on https://github.com/RMerl/asuswrt-merlin (legacy 380.xx) and https://github.com/RMerl/asuswrt-merlin.ng (382 and newer releases).

...culfw is used in conjunction with the CUL/CUN/CUR and a high level software like fhem to automate some common tasks in the household like switching lamps / shutters / heating / etc. and to log events like temperature/humidity/power consumption. culfw supports following RF protocols: "SlowRF" mode: FS20: send/receiveo, FHT: send/receive, S300: receive, EM1000: receive, HMS: receive, Hoermann: receive. ESA2000: receive, Lacrosse TX2/TX3: receive, Intertechno: send BidCos(R) in the "AskSin" mode (20kHz datarate, FM). HomeMatic(R) Wireless devices use this protocol. When configured as an RFR (RF-Router) client, then a CUL plugged into a wall socket can communicate via high-speed RF to the base, while serving all the SlowRF protocols. CUNO: OneWire and InfraRed support.

...A deauthentication attack is often confused with Wi-Fi jamming, as they both block users from accessing Wi-Fi networks. The 802.11 Wi-Fi protocol contains a so-called deauthentication frame. It is used to disconnect clients safely from a wireless network. Because these management packets are unencrypted, you just need the MAC to address of the Wi-Fi router and of the client device which you want to disconnect from the network. You don’t need to be in the network or know the password, it’s enough to be in its range. With the 802.11w-2009 updated standards, management frames are encrypted by default.

...Supported USB to Ethernet adapters: 3Com, AboCom (10/100 and HPNA), Accton/SMC (some models), ADMtek, AEI, Allied Telesyn, ATEN, Belkin (some models), Billionton, Corega FEther, D-Link (some models), EasiDock, ELECOM, Elsa Micolink, Gigabyte GN-BR402W Wireless Router, GOLDPFEIL, Hawking, Hewlett-Packard HN210C, IO DATA, Compaq iPAQ Networking, Kingston KNU101TX Ethernet, LANEED, Linksys, MELCO/BUFFALO, Microsoft MN-110, NETGEAR FA101, OCT, Philips USB 10/100 Ethernet, smartNIC 2 PnP Adapter, SOHOware NUB100/NUB110 Ethernet, SpeedStream USB 10/100 Ethernet

openchronos-ng is a major rework of openchronos. Compared to openchronos it has the following features: * system message bus for system<->module communication. * hardware RTC timekeeping (no more clock inaccuracy). * rework of timer and ports drivers. * implementation of a module system (drop in applications). * rework of the display routines. * rework of the menu system. The firmware code is also conceptually simpler and smaller which leaves room for more modules (applications).

This project is a Linux Kernel 2.4/2.6/3.x module/console program for changing wireless radio status on the Fujitsu Siemens AMILO A1655G laptop.

Open Source Linux driver for wireless network cards (DWL-[G]520+ PCI, DWL-[G]650+ CardBus, GL-2422MP mini-PCI, DWL-120+ USB etc.) which use the entirely undocumented Texas Instruments (TI) ACX100/ACX111 chips, for 2.4.x , 2.6.x to 3.x kernels. FreeBSD: see some other website (FIXME URL got clipped). !! BIG FAT NOTE: development (i.e., driver "releases") is happening in git source repository tree (as of 2011-09-04), thus you're expected to look there (see web site menu Code --> Git) !!

IEEE 802.15.4 networkong stack covers PHY and MAC layers (PHY layer implemented in hardware and MAC optionally implemented in software). Also 6lowpan (IPv6 packet encapsulation) is implemented for use by IEEE 802.15.4 and BT LE networks. Note: due to licensing restrictions (and despite project's name) we do not plan to implement any ZigBee related stack parts.

A 2.4 GHz wireless development board suitable for Bluetooth experimentation. Open source hardware and software. This project has moved to GitHub - https://github.com/greatscottgadgets/ubertooth

Libre Software to manage audio/video connection from a PC to a libre hardware real time stethoscope hardware, developed to allow doctors make a remote diagnose in real time in isolated rural areas of developing countries or for medicine teaching

This project aims to port linux on the ETC WEP (Wireless Embedded Platform).

A driver for the ELSA MC-2 wireless lan PCMCIA card for linux kernels 2.2.x and 2.4.x (which may also support the ZCOM WL2430 card in the future)

Software related to Ericsson mobile broadband modules (f3507g, f3607gw, f3307, c3607 and f5521gw).

Library for handling XBee / XBee-PRO RF modules. The library is written in C and supports the following platforms: Linux (x86, MIPSel), Windows (x86), AT91 SAM7 microcontrollers.

Linux driver for the ArrayComm* "iBurst*" wireless broadband devices. Based on an existing GPLed driver "ibut" written in C and distributed by ArrayComm, the project supports porting to new kernel and hardware versions, as well as development. *TM

ULLA allows developers of network aware applications to access data from device drivers similar to the Wireless Extensions on Linux. However, its new design simplifies the API syntax and expands the access to all wireless technologies such as GSM, BT.

Airgo MIMO wireless card Linux driver. It's base on the Specs at http://airgo.wdwconsulting.net/mymoin. If it success, then Linux can support the AGN100 and the AGN300. You can get the newest development status from http://git.sipsolutions.net/agnx.git

This Project was born on friday, 13th of February. The target of this project is to edit the existing Wireless LAN Realtek RTL8180L-Wlan-Modules, wich works only with RedHat Linux 8 and 9, so that you can use them on all distributions and kernel versions

This project is here to help users change the status of their wireless cards radio on laptops which do not have a hardware based wireless radio switch. We have a laptop support table, and linux modules for some Averatec and Packard-Bell hardware.

TiVo USB Wireless Adapter device driver for Linux and Windows. The adapter users the Broadcom BCM4320 (AirForce One. Single-Chip 802.11g USB 2.0 Transceiver) chipset and portions of this project may be directly applicable to other devices using the same.

Driver for a 3Com 3CRWE62092A X-Jack PCMCIA wireless card for Linux 2.6.x kernel

BlueXare Bluetooth Broadcasting System is aimed to provide a content spreading platform. It is formed by a specific GNU/Linux distro, a Bluetooth broadcasting daemon, a Bluetooth service point architecture design and a set of system managent tools.

This project is a Linux Kernel 2.4/2.6 module/console program for change wireless radio status on Fujitsu-Siemens AMILO M 7440 laptop

OpenMAC is a TinyOS-based implementation of IEEE 802.15.4 MAC layer, which lies at the core of MeshNetics ZigBee stack, and provides basic wireless networking (star,peer to peer) to WSN's. Available for low-power ZigBit modules and Atmel AVR Z-Link Kits

A wireless local area network (WLAN) driver for Solaris for WLAN devices based on the ZD1211 chipset.