Search Results for "tcp/ip"

This project offers open source implementations for UNESCO/IFIP's Algol 68 (the Revised Report language). The project offers two implementations: Implementation 1 is Algol68G: a recent checkout hybrid compiler/interpreter by Marcel van der Veer, supporting arbitrary arithmetic, partial parametrisation, complex numbers, POSIX threads, GNU plotutils, GNU scientific library, curses, sound, TCP sockets, RegEx and PostgreSQL. Inplementation 2 is algol68toc, a port by Sian Mountbatten...

... with Apple HomeKit! This library is built with ESP8266 Arduino Core 2.6.3. Lower versions may compile with errors. For ESP32, see Arduino-HomeKit-ESP32. The HomeKit running on ESP32 has a GREAT PERFORMANCE which is 10x faster than ESP8266. You should set the ESP8266 CPU to run at 160MHz (at least during the pairing process), to avoid the tcp-socket disconnection from the iOS device caused by a timeout.

Industry Pack support for Linux kernel. Project to host carrier and IP modules device drivers for Linux kernel.

CUPS back-end for the canon printers using the proprietary USB over IP BJNP protocol. This back-end allows Cups to print over the network to a Canon printer. The design is based on reverse engineering of the protocol. Version 2.0 adds ink-level reporting and improved out-of-paper detection. Version 2.0.1 is now released under GPLv2 or later to be compatible with the changed cups license. No other changes. Version 2.0.2 fixes a compile error with GCC9 Version 2.0.3 Fix GCC10 compile...

can4linux is hosted on https://gitlab.com/hjoertel/can4linux since 2016. Don't use SourceForge anymore for this code. can4linux is an universal Linux device driver for ISA or PCI interface boards with CAN interface and embedded CAN controller solutions. Based on the API provided by can4linux commercial protocol stacks for CANopen, J1939 and DeviceNet are available. A first PCI board with an FPGA based CAN FD controller is supported (TARGET=IXXAT_IB500) in the CAN FD ISO mode but also non-ISO

... be controlled by smartphone via WiFi or from Internet using some free dynamic IP. What more? Enjoy. Sources in github https://github.com/msillano/USBphpTunnel Preconditions: MXQ + Palapa Web server, Arduino UNO Install: - Download USBphpTunnel11_d.apk and the full test_files dir - See file /test_files/readme.txt

mochad is a Linux TCP gateway daemon for the X10 CM15A RF (radio frequency) and PL (power line) controller and the CM19A RF controller.

The USB/IP Project aims to develop a general USB device sharing system over IP network. To share USB devices between computers with their full functionality, USB/IP encapsulates USB I/O requests into IP packets and transmits them between computers.

This project provides the source code for the Pacific Communications EVOnet-C-SM-10DNW PTZ IP Security camera. The EVOnet-C-SM-10DNW is manufactured by IDIS in Korea and is also known as the S-SM-10DNW by IDIS. This firmware was obtained under GPL from OpenSource IDIS <opensource.cctv@gmail.com> and is now being distributed online under the same licenses. This project is not sponsored or supported in any way by Pacific Communications or IDIS.

Development of Linux drivers for Xilinx MailBox IP. MailBox IP is a bi-directionnal FIFO plugged between two buses, allowing sending messages from one bus to the other, in both directions.

Library for handling XBee / XBee-PRO RF modules. The library is written in C and supports the following platforms: Linux (x86, MIPSel), Windows (x86), AT91 SAM7 microcontrollers.

A simple user level UDP/IP/Ethernet environment used to test and demonstrate the capabilities of the Linux VFIO driver. Includes drivers for 3 different Ethernet devices.

Linux kernel level driver to allow access to the I/O of the Beckhoff CX-1100 power supply used with the Beckhoff CX-1000 embedded PC. This allows access to the K-Bus and IP-Bus of the Beckhoff system.

A low cost software and hardware KVM over IP and remote Console monitoring solution running on Linux. Secure administration and access to remote keyboard/video/mouse and serial console output. Easily configured and customised to suit user needs.

NetInput is a collection of tools to practically provide a software implementation of a mouse/keyboard switch on a client/server basis. It uses the IP protocol to let one server control mouse/keyboard activities on one or more clients.

Drivers and daemon for using iSCSI (SCSI over IP) on Linux. For Linux kernels 2.6.11 and above, use open-iscsi.org. For the 2.6.9 and 2.4 kernels, use the RHEL4 and RHEL3 CDs respectively. The 4.0.2 version here will work on the 2.6.10 kernel only.

Eppnics: Electronic parallel port network interfaced control system. Eppnics allows you to control electronic circuits connected to a parallel port via a TCP/IP connection.

We are currently developing our embedded TCP/IP modules, industrial ethernet systems and wireless platform for system control and data acquisition. Our main development environment is Linux and GNU tools like GCC (ASM, C, C++) and Python.

Ion consists of two parts. libion is a driver for the Insteon Power Line Controller sold by Smarthome. iond is a system daemon for handling asynchronous events and provides a TCP api for sending commands to Insteon devices.