Search Results for "jd-core"

This repo adds the support of STM32 MCU in Arduino IDE. This porting is based on STM32Cube MCU Packages including the HAL hardware abstraction layer, enabling portability between different STM32 devices via standardized API calls. The Low-Layer (LL) APIs, a lightweight, optimized, expert-oriented set of APIs designed for both performance and runtime efficiency. CMSIS device definition for STM32. Arduino.cc IDE allows to add easily new board thanks the "Boards Managers". More information...

Armadeus is an OpenSource Hardware and Software project based on an ARM core (Freescale i.MX) and Linux. You can consult our wiki at http://www.armadeus.org to join our non profit association or our commercial website at http://www.armadeus.com .

A set of C language API's and firmware applications that manage access to the Digitrax LocoNet and the core hardware resources of the Atmel AVR family of devices, to allow custom embedded LocoNet devices to be developed using GCC

Generic SCSI target subsystem for Linux SCST allows creation of sophisticated storage devices. It includes generic SCSI target core with SCSI target drivers and backend handlers. There are target drivers for iSCSI, Fibre Channel, SRP, SAS, FCoE, etc.

...This library is built with ESP8266 Arduino Core 2.6.3. Lower versions may compile with errors. For ESP32, see Arduino-HomeKit-ESP32. The HomeKit running on ESP32 has a GREAT PERFORMANCE which is 10x faster than ESP8266. You should set the ESP8266 CPU to run at 160MHz (at least during the pairing process), to avoid the tcp-socket disconnection from the iOS device caused by a timeout.

Uart32 is a C++ wrapper around the win32 Serial Port API that allows blocking-mode access to the COM port. This library works great for accessing a UART serial port from a background worker thread. It features: a simple c++ class. (temporarily removed for maintainance. Use DLL API Instead) built in per access timeout on data receive. a C-API wrapper that is exportable to C# DLL import class

XFreq provides a GUI to monitor the Processor frequencies (including Turbo Boost), the temperatures, C-States; and to alter the operational features of the Intel Core i7 processor. XFreq is also programmed for Core 2 and other Intel 64-bits architectures.

libcpuid provides CPU identification for the x86. It wraps the CPUID and RDTSC instructions in a portable manner and provides a lot of technical info about the processor, such as vendor, core codename, features/instruction sets, cache sizes, and more.

This is the software i created for controlling my PC's power indicator. The indicator has been replaced with an Arduino controlled RGB led. Core Temp is required and the Arduino code requires the CMD Messenger library. This software is in beta, and not 100% completed yet.

USB for Real-Time aims at providing a hard real-time capable implementation of an USB stack on top of Linux/Xenomai. It comes with a stack core and an UHCI host controller drivers. Future work will deal with a EHCI (2.0) and various high-layer drivers.

USB 2.0 for Real-Time provide a hard real-time capable implementation of an USB 2.0 stack on top of Linux/Xenomai. It implements the stack core and EHCI, UHCI and OHCI host controller drivers.

A linux kernel module inspired by i7z that enables unprivileged users to monitor informations like current frequency (including Turbo Boost!) and temperature of Intels Core i processor family.

Tool to identify your CPU using the cpuid instruction. Displays cache information, number of cores, codename, core stepping, ...

lpcusb is a USB core stack for the built-in USB device of LPC214x microcontrollers. It handles the hardware interface and USB enumeration/configuration. Included are usage examples like USB joystick HID, USB virtual COM port and USB mass storage on SD-ca

OpenMAC is a TinyOS-based implementation of IEEE 802.15.4 MAC layer, which lies at the core of MeshNetics ZigBee stack, and provides basic wireless networking (star,peer to peer) to WSN's. Available for low-power ZigBit modules and Atmel AVR Z-Link Kits

This driver integrates cards based on the Mentor Graphics multi-point high-speed OTG USB core with Linux kernels 2.6.x.

Maiden-core is a Linux kernel robotics API module, extensible in Erc. The Maiden Project also documents and develops the Maiden architecture for mobile robots, a set of (optional) designs and standards for robots using the Maiden-core API.

ARCNET network controller core, descriped in VHDL with datasheet, documentation, device drivers, a software testsuite and examples. All based on the PM20100 VHDL-design from Peter Mühlenbrock.

Linux CAN (Controller Area Network) Driver for the Hynix HMS30C7202 Microcontroller (ARM7T core, C_CAN Module). The driver will be developed for Kernel Version 2.4.18.

RSTK is a C language program that generates Reed-Solomon HDL source code modules that can be compiled and synthesized using standard VHDL or Verilog compilers and synthesis tools.

SimOS is an OS that will be based on the OSKIT function library. In addition we will be maintaining the oskit as a seperate release, updated as the core of the kernel. This OS will be easy to use, with numerous software versions on it.

Linux core driver with API-interface for the Cypress CY7C63000, CY7C63001, CY7C63100, CY7C63101

BlueNIC implements the Bluetooth Personal Area Network Profile with all roles as PANU,GN and NAP. The software is written as a loadable module for the linux kernel and required the BlueZ Bluetooth core stack.

SENSEN (SENSible/Epidiptic Network) suite is a collection of codes, schematics and technical documentation of a core work developed for an interactive experimental installation codenamed 02L (Outside standing Level)

Java access to USB, currently using kernel 2.4 Linux-USB support. There is a "core" API for accessing USB devices, and simple tools including a USB viewer in Swing. Applications are being developed separately, including digital camera support.