Search Results for "ethrtnet/ip"

Industry Pack support for Linux kernel. Project to host carrier and IP modules device drivers for Linux kernel.

This Arduino library is a native Apple HomeKit accessory implementation for the ESP8266 Arduino core and works without any additional bridges. This project is mainly based on an esp-home kit for ESP-OPEN-RTOS. I ported the RTOS-based implementation of the esp-home kit to the pure Arduino environment, aimed at easy and fast building projects using Arduino IDE (or Eclipse with sloeber, PlatformIO). Enjoy the "one-key" build, "one-key" upload, and work to link various other Arduino libraries...

CUPS back-end for the canon printers using the proprietary USB over IP BJNP protocol. This back-end allows Cups to print over the network to a Canon printer. The design is based on reverse engineering of the protocol. Version 2.0 adds ink-level reporting and improved out-of-paper detection. Version 2.0.1 is now released under GPLv2 or later to be compatible with the changed cups license. No other changes.

can4linux is hosted on https://gitlab.com/hjoertel/can4linux since 2016. Don't use SourceForge anymore for this code. can4linux is an universal Linux device driver for ISA or PCI interface boards with CAN interface and embedded CAN controller solutions. Based on the API provided by can4linux commercial protocol stacks for CANopen, J1939 and DeviceNet are available. A first PCI board with an FPGA based CAN FD controller is supported (TARGET=IXXAT_IB500) in the CAN FD ISO mode but also non-ISO

...At the end your application will works on XQ+Arduino UNO even 24/7 with only 20 Watt AC power, and can be controlled by smartphone via WiFi or from Internet using some free dynamic IP. What more? Enjoy. Sources in github https://github.com/msillano/USBphpTunnel Preconditions: MXQ + Palapa Web server, Arduino UNO Install: - Download USBphpTunnel11_d.apk and the full test_files dir - See file /test_files/readme.txt

The USB/IP Project aims to develop a general USB device sharing system over IP network. To share USB devices between computers with their full functionality, USB/IP encapsulates USB I/O requests into IP packets and transmits them between computers.

This project provides the source code for the Pacific Communications EVOnet-C-SM-10DNW PTZ IP Security camera. The EVOnet-C-SM-10DNW is manufactured by IDIS in Korea and is also known as the S-SM-10DNW by IDIS. This firmware was obtained under GPL from OpenSource IDIS <opensource.cctv@gmail.com> and is now being distributed online under the same licenses. This project is not sponsored or supported in any way by Pacific Communications or IDIS.

Development of Linux drivers for Xilinx MailBox IP. MailBox IP is a bi-directionnal FIFO plugged between two buses, allowing sending messages from one bus to the other, in both directions.

Library for handling XBee / XBee-PRO RF modules. The library is written in C and supports the following platforms: Linux (x86, MIPSel), Windows (x86), AT91 SAM7 microcontrollers.

A simple user level UDP/IP/Ethernet environment used to test and demonstrate the capabilities of the Linux VFIO driver. Includes drivers for 3 different Ethernet devices.

Linux kernel level driver to allow access to the I/O of the Beckhoff CX-1100 power supply used with the Beckhoff CX-1000 embedded PC. This allows access to the K-Bus and IP-Bus of the Beckhoff system.

A low cost software and hardware KVM over IP and remote Console monitoring solution running on Linux. Secure administration and access to remote keyboard/video/mouse and serial console output. Easily configured and customised to suit user needs.

NetInput is a collection of tools to practically provide a software implementation of a mouse/keyboard switch on a client/server basis. It uses the IP protocol to let one server control mouse/keyboard activities on one or more clients.

Drivers and daemon for using iSCSI (SCSI over IP) on Linux. For Linux kernels 2.6.11 and above, use open-iscsi.org. For the 2.6.9 and 2.4 kernels, use the RHEL4 and RHEL3 CDs respectively. The 4.0.2 version here will work on the 2.6.10 kernel only.

Eppnics: Electronic parallel port network interfaced control system. Eppnics allows you to control electronic circuits connected to a parallel port via a TCP/IP connection.

We are currently developing our embedded TCP/IP modules, industrial ethernet systems and wireless platform for system control and data acquisition. Our main development environment is Linux and GNU tools like GCC (ASM, C, C++) and Python.