Search Results for "electronic"

EQ Track purpose is to provide amateur telescope makers (ATM) with electronic board schematics and embedded software to control their telescope mount via stepping motors. EQ Track comes in different "flavors" : - "Basic" controls the right ascension and declination motors of an equatorial mount. - "Go To" controls the motors of a mount in any orientation (ie. equatorial, altazimuth, alt-alt), to point and track equatorial coordinates.

UrJTAG aims to create an enhanced, modern tool for communicating over JTAG with flash chips, CPUs, and many more. It is a descendant of the popular openwince JTAG tools with a lot of additional features and enhancements.

L-ink Card is a smart NFC card with an electronic-ink display built into the card form-factor, aimed at solving everyday pain points of IC cards and giving them a “cooler” interface. The project uses an STM32L0-series microcontroller paired with an ST25DV NFC chip, an e-ink screen, and battery management so the card can display dynamic info while also serving as an NFC tag/card.

dgtdrv aims to be a uci/xboard/crafty compatible interface (input engine) for the DGT Electronic Chess board on POSIX platforms. It relies on the dgtnix library.

The “lpACLib” library contains the VHDL description of accurate and approximate versions of several arithmetic modules (like adders and multiplier of different bit-widths) and accelerators. Moreover, it also provides the corresponding software behavioral models/implementations developed in C and MATLAB to enable quality characterization. Besides our novel designs, it also contains implementations for several state-of-the-art arithmetic modules and their approximate versions. This open-source...

This (Python) tool allows you to easily create FPGA bitfiles for your embedded system, from several Open Source IPs (compatibles with the OpenCores Wishbone bus) . It will also generates the corresponding drivers (currently only Linux ones).

USB-IR-Boy is an LIRC compatible home brew USB Infrared (IR) receiver based on the Motorola (Freescale) MC68HC908 microcontroller. The project includes electronic schematics, MCU code, and a lircd compatible kernel module.

FpgaC compiles a subset of the C language to net lists which can be imported into an FPGA vendors tool chains. C provides an excellent alternative to VHDL/Verilog for algorithmic expression of FPGA reconfigurable computing tasks. More info in wiki.

Porcupine2 is a small wearable sensory unit for logging motion data and doing low-level activity recognition. The project includes electronic schematics for the hardware, software for the microcontroller and client-side software for hardware-interaction.

All design related files for a general purpose PCB, hosting a Microchip dsPIC33FJ256MC710 part. Includes gEDA schematic and layout files, BOM, etc... The card will include power regulation, SD memory card, in-circuit programming support, etc...

Working with microprocessors is one of the most creative, challenging and rewarding areas of electronic and software engineering. Open-USB-IO makes learning this process fun and easy.

The primary aim of this project is to develop a full featured Microblaze simulator . The project is develloped only in C , then it can be easely ported.

Further development of the seri2c driver which is used for an older PCI card from the company Tritec Electronic AG and offers eight serial interfaces.

OpenVGA is an free and open FPGA-based implementation of a VGA compatible graphics adapter, and utilising low-cost hardware. The project includes the PCB schematic and artwork, Verilog HDL, firmware assembly code, and driver source code.

Linux based client software and a set of AVR microcontroller devices that support the SportIdent electronic punching system used in orienteering. Clients send card data to a PHP/SQL web application, that serves as full featured event software.

Teleo, by MakingThings, is a modular system of I/O modules that provide a simple interface to electronic devices - sensors, motors, lights, and more - from your desktop or laptop.

HW(VHDL) and SW of logic analyzer and On-Chip-Verification(OCV) for Value Change Dump(VCD) file format that exported to seemd SystemC ,ModelSIM, and many other EDA tools. Very easy and Simple.

SECU86 is Standard Engine Control Unit x86. The project goal is to develop a standard computer and OS (opensource) that would work on any car. It'll be based on the x86 processor and will try to replace the poor standard ECU that comes with any car.

SIMACH is a Emulator Development Kit. The goal is to develop a IDE that'll allow a developer to easily write and debug a highly portable emulator, automaticly generating code to the destination plataform.

This project is aimed to develop an Hardware Monitor & Protection System for PCs using PICmicros. This project is divided into two branches: the first one involves microcontroller's firmware, the second one software used to manage the PIC via COM po

An open-source Windowslibrary for low-level parallel port access. Does not require installation of any drivers. Emulates API of most commonly used solutions.

PPort is a simple yet handy automation program and its documented counterpart for interfacing a PC with external devices. With this bundle, one can control any household appliance or electronic device with minimal hassle and practically no changes

OpenTCI - A GPL-Compliant Open Source SW/HW Effort to produce quality electronic replacement/-racing Devices for Motorbikes in private or racing sports use.

Eppnics: Electronic parallel port network interfaced control system. Eppnics allows you to control electronic circuits connected to a parallel port via a TCP/IP connection.

RSTK is a C language program that generates Reed-Solomon HDL source code modules that can be compiled and synthesized using standard VHDL or Verilog compilers and synthesis tools.