Search Results for "e-root"

HelloWord-Keyboard is a high-end modular keyboard platform where both the hardware and firmware are designed from scratch to provide deep customizability and advanced features. The project comprises a main keyboard PCB (STM32F103), a dynamic module (STM32F405) with additional features like an e-ink screen, OLED display and a haptic/motorized knob, a base/dock module with USB hub functionality, and other supporting PCBs. The firmware includes high-speed scanning of keystrokes, RGB lighting control via SPI/DMA, HID keyboard enumeration, multiple key-layer mapping and non-volatile configuration storage. The hardware architecture is modular: the keyboard, dynamic module, and base connect via FFC/contacts so you can swap out the dynamic side module or bottom. ...

L-ink Card is a smart NFC card with an electronic-ink display built into the card form-factor, aimed at solving everyday pain points of IC cards and giving them a “cooler” interface. The project uses an STM32L0-series microcontroller paired with an ST25DV NFC chip, an e-ink screen, and battery management so the card can display dynamic info while also serving as an NFC tag/card. Its functionality may include showing balance, last transaction, QR codes, or other custom info on the e-ink screen, and interfacing with smartphones or readers via NFC. Because it uses e-ink, the card can display static content with minimal power drain, making it practical for real-world card use. ...

iWattnick aims to be a top-class computer for e-bikes, e-scooters, e-motorcycles. It is equipped with a large B/W screen, two buttons, accelerometer, magnitometer, current and voltage sensors, light sensor, internal temperature sensor, battery-backed real-time clock, a buzzer and has connection ports for external speed sensor (motor Hall, phase or reed switch), a Bluetooth SPP dongle, up to three temperature sensors (TMP36, LM35, KTY83 etc), cadence sensor, throttle handle, output to controller throttle input. ...

spectrometer drivers and libraries for Linux. Driver and libraries for: I-MON 512E-USB spectrometer, I-MON E-USB 2.0 spectrometer

*** Please e-mail ALESIS for a Linux driver for the MultiMix8 USB2.0 - maybe we can get them to provide one, or some sort of developer information! here's a link: http://alesis.com/contact *** Linux ALSA Driver for Alesis MultiMix8 USB2.0 mixer audio interface, capable of multichannel recording. Currently this project has pre-alpha/research status.

[Italiano] Addon per il driver del DVB-S2 del sunray (dm800se) per il supporto del triplo tuner (DVB-T e DVB-C). ATTENZIONE: le versioni "stabili" sono quelle pubblicate nella sezione download. I sorgenti si trovano nelle sotto-directory svn tags. La directory trunk del svn contiene la versione di sviluppo: può contenere codice non funzionante o non compilante. Utilizzarla solo per contribuire allo sviluppo. [English] DVB-S2 driver addon for sunray (dm800se), to activate the triple tuner (DVB-T and DVB-C). ...

Linux based client software and a set of AVR microcontroller devices that support the SportIdent electronic punching system used in orienteering. Clients send card data to a PHP/SQL web application, that serves as full featured event software.

The GNU/Gtk BlowIt is a (E)EPROM programmer that currently supports AT89C2051 (mcs-51 compatible) microcontrollers, with plans to support other devices. The project was originally started by Ondrej Kolonicny.

...No extra library dependency, only standard X library. Very small and simple C code. Tested with 2.6 series kernel, SkyStar2 DVB card and WindowMaker0.92 on Slackware 12. e-mail: maxcompress@yahoo.com

XMK is a preemptive multitasking kernel for microcontrollers. Its goal is to provide a RTOS small enough (RAM+ROM) to run on 8bit microcontrollers. XMK provides additional/optional features when scaling up to 16bit and 32bit platforms.

Ce projet couvre tous les développements logiciels qu'Unitec, le club de robotique de l'UTBM, va entreprendre pour la coupe de France de robotique E=M6.

This small project is a bridge between RTAI and RTLinux applications in Kernel-Space and ROOT-trees (see http://root.cern.ch) in User-Space.

Patched slackware installation boot/root disks to support the Vaio C1Vx USB floppy. Currently only Slack 8 is supported, with 8.1 coming soon.