Search Results for "camera"

...Betaflight supports a wide range of flight controllers with at least an STM32F4 MCU. You can use nearly any piece of modern hardware out there. Full telemetry and high refresh rate for receivers, camera and VTX control, RGB LEDs, and much more! Run the configurator on any device, whether it is using Windows, MacOS, Linux, or Android. With the Betaflight OSD you can get all relevant flight metrics directly into your FPV video feed. An easy-to-use drag-and-drop configuration allows the placement of values like used mAh and LiPo Voltage readings. ...

Lenovo Legion Linux (LLL) brings additional drivers and tools for Lenovo Legion series laptops to Linux. It is the alternative to Lenovo Vantage or Legion Zone (both Windows only). It allows you to control features like the fan curve, power mode, power limits, rapid charging, and more. This has been achieved through reverse engineering and disassembling the ACPI firmware, as well as the firmware and memory of the embedded controller (EC).

libdc1394 is a library that provides a high level programming interface for application developers who wish to control and capture streams from IEEE 1394 based cameras that conform to the 1394-based Digital Camera Specifications (also known as the IIDC or DCAM Specifications). libdc1394 also supports some USB cameras that are IIDC compliant. Besides capture and control, libdc1394 provides a full set of colour space conversion functions (including RAW decoding), vendor specific functions and direct camera register access. Keywords: ieee1394, IIDC, DCAM, firewire, USB, machine vision, computer vision, video capture, library

libVISCA is a library for controlling a VISCA compliant video camera. VISCA is a professional camera control protocol, designed by Sony to be used on several of its surveillance and OEM block cameras.

This project provides the source code for the Pacific Communications EVOnet-C-SM-10DNW PTZ IP Security camera. The EVOnet-C-SM-10DNW is manufactured by IDIS in Korea and is also known as the S-SM-10DNW by IDIS. This firmware was obtained under GPL from OpenSource IDIS <opensource.cctv@gmail.com> and is now being distributed online under the same licenses. This project is not sponsored or supported in any way by Pacific Communications or IDIS.

QuickCam VC device driver for linux based on V4L V4L2 specifications.

Drivers and applications for the range of Scientific CCD cameras produced by Apogee Instruments Inc. Both ISA and Parallel interfaces are supported. A high level library and GUI are provided for Astronomical applications.

The cc3 project provides software for embedded vision systems. Currently, the software runs on the CMUcam3 hardware platform, which is a NXP LPC2106-based board with an onboard CMOS camera and FIFO, MMC interface, serial UARTs, and servo controller.

Scanner and camera button monitoring/networking daemon for Linux/BSD desktops

Canon EOS class remote control utility for 300D, 350D, 30D, 20D and 5D. It is possible to control more of Canon cameras in the same time up to six cameras attached. Multican allows scripted remote control of multiple cameras.

Linux iSight audio driver (ALSA). This driver works only with the ieee1394 (firewire) iSight digital camera. It will not work with the iSight shipped "embedded" with the new intel-mac series (macbook, macbook-pro, imac)

Xirlink Webcam Driver

Linux - POSIX compliant open source driver for the Canon Communication VC-C1 camera

This is the Solaris USB camera drivers project and it will first target on the OV511 cameras based on the Linux ov511 driver. NEW: USB Video Class on Solaris. See the project forum for updates!

Development of a linux driver for the USBAT-2 CompactFlash reader that comes with the Kodak digital camera DC3800. This driver should also work with various other devices that use the same chip.

Unix kernel module for MR97310 or MR97310A USB chip used in digital cameras by Aiptek, Mars, Emprex ... Attempting to use existing modules with slight modification failed, so development stopped. If you are willing to take over this project, please email

There are popular tape device ArVid which based on ordinary (PAL/SECAM) VHS & ISA board with PLM which often used in Russia and xUSSR. ArVid board are controled by VHS behind integrated multisystem IRC node. I've coded raw driver for this device. Driver

LavaRnd is a random number generator that converts a digitized chaotic source (such as a lens capped web camera) into cryptographically strong random numbers. LavaRnd comes with both an APIs (currently C and Perl) as well as a number of demos.

Superseded by the GSPCA driver in the mainline kernel. Development now at http://linuxtv.org/ [Formerly: Linux device driver for SPCA50X based USB cameras (Intel PC Camera Pro)]

A simple commandline tool for downloading pictures, sound and movies from the Creative PC-CAM.

A Linux USB driver for 3Com's HomeConnect(tm) WebCam

Digital camera software for cameras using the DC-3 protocol, such as the Ricoh RDC-300, 300Z, and 4300.

A driver for the Winbond W9967CF and W9968CF webcam IC's and hence the Webcam go and variations on it. See the project home page for details. Note that this project is dead. If you want it, ask me (scarfboy).

...There is a "core" API for accessing USB devices, and simple tools including a USB viewer in Swing. Applications are being developed separately, including digital camera support.

Webcam control panel for SONIX sn9c20x bridge and microdia driver. Add additional controls of v/h flip, auto exposure control, fast shoots via button of camera, turn on and off led's, flash, type of palette.