Search Results for "c# develop"

The Open IPMI project aims to develop an open code base to allow access to platform information using Intelligent Platform Management Interface (IPMI).

Designed for data-logging applications (weather, hydroponics, greenhouses, aquariums, home automation, power consumpion, solar or wind generators etc.), this solution can be useful also in alarms and burglar. Now you can develop MySQL and web enabled Arduino applications only working on Arduino and PHP. To keep ligth the Arduino Sketch, you can port all not realtime logic to PHP side. At the end your application will works on XQ+Arduino UNO even 24/7 with only 20 Watt AC power, and can...

The USB/IP Project aims to develop a general USB device sharing system over IP network. To share USB devices between computers with their full functionality, USB/IP encapsulates USB I/O requests into IP packets and transmits them between computers.

Documentation, simulator, compiler, and Verilog implementation of a completely open-architecture graphics processing unit. This design is intended for academic and commercial purposes. The first step is to develop a detailed GPU simulator and compiler. The second step is to implement the GPU in synthesizable Verilog. The third step is to develop a feedback loop between the simulator and implementation, allowing power, performance, and reliability aspects of the hardware to feed back into...

The Project "WDT Driver for LPC1114 on FreeRTOS" was my Project work required for the partial Completion of my Post Graduate Diploma in Embedded System Design at Center for Development of Advanced Computing, Advanced Computing Training School, Pune, India. The Duration of the Project was 15-20 Days wherein we had to develop the driver library for the Watchdog Timer on LPC1114 and incorporate the same into FreeRTOS. The services of the driver are exported using the UNIX like read, write,...

This project introduces new FPGA architectural tools and Linux OS modifications that aid in supporting Dynamic Partial Reconfiguration (DPR) on FPGAs for concurrent control. It shows that control systems benefit from hardware concurrency, meaning that by moving the control intelligence into hardware, the negative effects inherent to threads and their scheduler are minimized. This leaves software with the role of a high-level administrator rather than an executor, thereby eliminating...

The CAN projects aim is to develop and maintain a CAN driver for Linux/windows that support misc. can chips/cards. Also utilities such as tracing tools, diagnostic tools and such will be published in the project. The Very Simple Control Protocol (VSCP)

Alternative attempt to develop linux driver for TI FlashMedia xx12/xx21 storage controllers.

`ezRobi' is a GPL'd free embedded application framework to ease robotics. It is designed to help beginners to easily develop the firmware for small autonomous robotics.

This project's goal was to develop an open source firmware for Sinus 154 DSL Basic SE and similar AR7 based devices. Projektziel war die Entwicklung einer freien Firmware für Sinus 154 DSL Basic SE und vergleichbare Geräte mit AR7-Prozessor.

This project has the goal to provide an easy starting point for embedded enthusiasts which want to develop their projects on ARM7 controllers.

Unofficial CAPT 3.0 driver for CUPS to support Canon LBP-3010 USB printers. I developed this driver because the official driver is only for Linux and I needed it for Solaris. I reverse engineered the CAPT3.0 protocol to develop this driver.

Project to develop a Linux LIRC device driver for the RedRat 3 (until the driver is accepted into the LIRC project). The RedRat3/Rerdat3II is a USB IR receiver/transmitter product (http://www.redrat.co.uk/)

The primary aim of this project is to develop a full featured Microblaze simulator . The project is develloped only in C , then it can be easely ported.

The Isis OS Project Is a Controlled Project to Develop An Advanced Modern Operating System!

The sx4000 project intends to develop the vendor provided Promise sx4000 driver, to a fully operational open source driver, compatible with the latest linux kernel release.

RT-FireWire aims to develop real-time network platform (on the real-time kernel extension of Linux,currently on Xenomai) on FireWire (a.k.a. IEEE1394). More information about this project can be found in www.rtfirewire.org

This is the community project to maintain and develop the Linux kernel driver for the Attansic L1 gigabit ethernet adapter.

This project is a combination hardware and software to further develop an SD Card interface at the hardware (FPGA) and software level based on a recently released SD card interface 2.0 specification.

SECU86 is Standard Engine Control Unit x86. The project goal is to develop a standard computer and OS (opensource) that would work on any car. It'll be based on the x86 processor and will try to replace the poor standard ECU that comes with any car.

SIMACH is a Emulator Development Kit. The goal is to develop a IDE that'll allow a developer to easily write and debug a highly portable emulator, automaticly generating code to the destination plataform.

Intent is to develop a kernel module and print driver for the Lexmark X85 All-in-One colour scanner/printer/copier. This kit hopefully will be generic enough to support most/all AIO devices from Lexmark or be easily adapted to do so.

This project is aimed to develop an Hardware Monitor & Protection System for PCs using PICmicros. This project is divided into two branches: the first one involves microcontroller's firmware, the second one software used to manage the PIC via COM po

The aim of this project is to develop a modular operating system for the i386 architecture, where each device driver, file system, etc, will be a module that can be loaded and unloaded at run-time from the system.

USB Radio has the goal to develop both the hardware and the software for a USB connected radio. A user should be able to control the radio from the computer and record and save broadcasts to hard drive.