Search Results for "as built"
Sort By:
Showing 27 open source projects for "as built"
View related business solutions-
$300 in Free Credit Towards Top Cloud ServicesStart your project in minutes. After credits run out, 20+ products include free monthly usage. Only pay when you're ready to scale.
-
Custom VMs From 1 to 96 vCPUs With 99.95% UptimeLive migration and automatic failover keep workloads online through maintenance. One free e2-micro VM every month.
-
1
Particle Firmware for the Electron, P1
Device OS (Firmware) for particle devices
The Photon uses an ARM Cortex M3 CPU based microcontroller. All of the code is built around the GNU GCC toolchain offered and maintained by ARM. The build requires version 5.3.1 20160307 or newer of ARM GCC and will print an error message if the version is older than this. In order to turn your source code into binaries, you will need a tool called make. Windows users need to explicitly install make on their machines. -
2
S.M.A.R.T. Monitoring Tools
Disk Inspection and Monitoring
smartmontools contains utility programs (smartctl, smartd) to control/monitor storage systems using the Self-Monitoring, Analysis and Reporting Technology System (S.M.A.R.T.) built into most modern ATA and SCSI disks. It is derived from smartsuite. -
3
stm32flash
Open source flash program for STM32 using the ST serial bootloader
Open source cross platform flash program for the STM32 ARM microcontrollers using the built-in ST serial bootloader over UART or I2C -
4
JxMake
A Java-based cross-platform build system.
JxMake is a Java-based, cross-platform build system primarily inspired by the syntax and features of GNU Make, Perforce Jam, and CMake. In addition, JxMake provides several capabilities not typically found in other console-based build systems, including a built-in lightweight GUI, serial console, serial plotter, multi-MCU in-system programmer, and more. Currently, JxMake's loadable libraries (build scripts) are primarily designed for non-OS MCU systems and experimental use. Full support for building desktop applications is planned for future development. Building JxMake requires Java SDK 8 or later (note that Java SDK 8 is a Long-Term Support version). -
Forever Free Full-Stack Observability | Grafana CloudBuilt on open standards like Prometheus and OpenTelemetry, Grafana Cloud includes Kubernetes Monitoring, Application Observability, Incident Response, plus the AI-powered Grafana Assistant. Get started with our generous free tier today.
-
5
QuickMAN is a Mandelbrot fractal generator with multicore support. ASM-optimized code can reach over 100 billion iterations per second. Features an easy-to-use GUI, realtime pan/zoom, multiple palettes, image logging, and saving in PNG format.
-
6
ttf-gdos
TTF-GDOS is an Atari GDOS replacement that uses true type fonts
...It is small, fast & efficient and can easily be used without a hard drive. It also incorporates features roughly equivalent to font-GDOS: - a caching system so you can use more fonts for a given amount of memory, - built in bezier functions This release includes ttf2gem, a utility program that creates accurate gem fonts from a true type font (new for 2.3) Using true type fonts gives you 3 big benefits: - you can choose from a vast range of true type fonts - true type fonts are scalable so you can have almost any size font you want - true type fonts need much less disk storage than typical gem printer fonts, so even on a low spec machine you can use lots of fonts. ... -
7
Barrier
Open-source KVM software
...Barrier is able to do this in software, giving you control over different machines by simply moving your mouse to the edge of the screen, or by using a keypress to switch focus to a different system. Barrier was built to be simple and reliable, allowing you to control a different machine by simply using your mouse and keyboard from another. It works on all major operating systems (Linux, Windows, MacOS/OS X), including FreeBSD and OpenBSD. -
8
HoloCubic
Multi-function transparent display desktop station
HoloCubic is a multi-function transparent display “desktop station” that uses a dispersive prism to create a pseudo-holographic visual effect, combined with WiFi and Bluetooth connectivity to support interactive network-capable applications. Built around an ESP32 PICO-D4 microcontroller, a 1.3″ 240×240 ST7789 display and MPU6050 inertial sensor, the device allows you to build a “floating hologram” style display module with additional networked visual features like weather display or follower counts. The hardware design includes versions of the PCB (Naive version, Ironman version) and 3D model files for the enclosure (3D printed or CNC metal). ... -
9
Arduino HomeKit ESP8266
Native Apple HomeKit accessory implementation for the ESP8266 Arduino
...I ported the RTOS-based implementation of the esp-home kit to the pure Arduino environment, aimed at easy and fast building projects using Arduino IDE (or Eclipse with sloeber, PlatformIO). Enjoy the "one-key" build, "one-key" upload, and work to link various other Arduino libraries with Apple HomeKit! This library is built with ESP8266 Arduino Core 2.6.3. Lower versions may compile with errors. For ESP32, see Arduino-HomeKit-ESP32. The HomeKit running on ESP32 has a GREAT PERFORMANCE which is 10x faster than ESP8266. You should set the ESP8266 CPU to run at 160MHz (at least during the pairing process), to avoid the tcp-socket disconnection from the iOS device caused by a timeout. -
Earn up to 16% annual interest with Nexo.Generate interest, access liquidity without selling, and execute trades seamlessly. All in one platform. Geographic restrictions, eligibility, and terms apply.
-
10
L-ink_Card
Smart NFC & ink-Display Card
L-ink Card is a smart NFC card with an electronic-ink display built into the card form-factor, aimed at solving everyday pain points of IC cards and giving them a “cooler” interface. The project uses an STM32L0-series microcontroller paired with an ST25DV NFC chip, an e-ink screen, and battery management so the card can display dynamic info while also serving as an NFC tag/card. Its functionality may include showing balance, last transaction, QR codes, or other custom info on the e-ink screen, and interfacing with smartphones or readers via NFC. ... -
11
-
12
W-Bus library and applications
W-Bus communication library
This is a small library that allows comunicating with a Webasto (tm) W-Bus capable car heating system. Runs on Personal Computers or for embedded devices (slim design). Easily portable. Includes a Heater manager, heater controller program and more. The GIT repository (CVS is deprecated) also includes a control unit application to control W-Bus capable devices, a W-Bus compatible heater unit firmware application and a heater simulator for testing purposes. Also, a serial port loop back... -
13
Wi-PWN
ESP8266 firmware for performing deauthentication attacks
ESP8266 firmware for performing deauthentication attacks, with ease. Wi-PWN is a firmware that performs death attacks on cheap Arduino boards. The ESP8266 is a cheap microcontroller with built-in Wi-Fi. It contains a powerful 160 MHz processor and it can be programmed using Arduino. A deauthentication attack is often confused with Wi-Fi jamming, as they both block users from accessing Wi-Fi networks. The 802.11 Wi-Fi protocol contains a so-called deauthentication frame. It is used to disconnect clients safely from a wireless network. ... -
14
Uart32
Win32 API wrappers for accessing COM Uart in blocking mode
...This library works great for accessing a UART serial port from a background worker thread. It features: a simple c++ class. (temporarily removed for maintainance. Use DLL API Instead) built in per access timeout on data receive. a C-API wrapper that is exportable to C# DLL import class -
15
-
16
PUB! Programmable USB Button
Program a button to send keystrokes to your computer
PUB! is a Programmable USB Button on which you can program with a sequence of keystrokes. When you press the button those keystrokes are "replayed" over a USB connection. The button is programmed using an innovative and slightly quirky interface that does not require any custom software to be installed on your computer. All you need is a text editor like Notepad or gedit. -
17
stakka_klm
Kernel module to manage Disc Stakka Units
...A /dev device is created per chain through which applications can read/write status and commands. A command-line tool is included to assist with testing and to illustrate the /dev interface. Built with information from various sample coding done by others over the years, who are referenced in the code comments - many thanks to those that have gone before me. -
18
Testcard is a SDL/SDL_gfx based monitor test pattern (test card) generator. SMPTE and other test patterns are supported. Future plans include a very basic scripting capability to construct custom test patterns from built in primitives.
-
19
This project is built to support extra functions to CLEVO laptops for Linux. May including several utilities and kernel driver modules.
-
20
This Linux daemon interacts with sony-laptop to provide additional features for Sony VAIO laptops. At the moment it supports automatic dimming of the display backlight and turning on/off keyboard backlight using the built-in ambient light sensor.
-
21
Uniform Driver Interface -- Public Source Code for runtime environments and drivers based on the UDI Specifications. Single source image for a driver, built once for each ABI (IA32, Sparc, etc.) and then run on any OS that provides UDI!
-
22
Ddr-Z8E is a device driver library for the Zilog Z8 Encore!(r) microcontroller. The library supports I/O, IRQ, RS-232, I2C, SPI, A/D, WDT, ticker and built in flash memory as well as utility modules, e.g. for debugging and binary number representation.
-
23
Open source contribution of the Linux kernel and drivers of the SYSOPENDIGIA 3G Linux smartphone. Linux SW built on top of Marvell Monahans/PXA patches to kernel version 2.6.14.
-
24
lpcusb is a USB core stack for the built-in USB device of LPC214x microcontrollers. It handles the hardware interface and USB enumeration/configuration. Included are usage examples like USB joystick HID, USB virtual COM port and USB mass storage on SD-ca
-
25
AVRMegaTools aims to provide generalized libraries for handling built in AVR hardware functions such as UART , TWI, SPI. It aims to provide high quality drivers which provide the user with a transparent or a semi-transparent view of the unerlying hardware
