Search Results for "radeon-project"

...The tools aim to fill functionality gaps when running Windows on a device originally optimized for SteamOS, such as adjusting thermal behavior or viewing real-time stats like FPS. Users have noted the project provides a lightweight alternative to other companion utilities and can be especially helpful when default drivers or settings don’t cover desired features. Because this software interacts with low-level system controls, its use carries some risk of instability, and it’s provided on a best-effort basis with documentation on installation and troubleshooting.

...It combines monitoring and control in one place, letting you view temperatures, fan RPM, and control percentages while you tune how aggressively each fan responds. The project supports a range of control backends and integrations, including motherboard fan headers and several popular cooling ecosystems, and it can also pull sensor data from common monitoring tools so your fan logic can react to the readings you trust. A core concept is “auto fan control” profiles where you pick a target temperature sensor, select which fans should follow it, and then shape the curve via a graph-like interface. ...

myFocuserPro2 (myFP2) is an ASCOM - INDI - LINUX - WINDOWS telescope focuser with a large range of options. 315,606+ file downloads. The most popular focuser project. (c) Copyright Robert Brown 2014-2026. All Rights Reserved. Code or portions of code may not be copied or used without written permission from the author. Other Focuser Projects myFP2ESP32 WiFi - https://sourceforge.net/projects/myfocuserpro2-esp32/ [ESP32 Only] myFP2ESP8266 WiFi - https://sourceforge.net/projects/myfp2esp8266-focus-controller/ myFP2N - Nextion touch screen display - https://sourceforge.net/projects/arduinoascomfocuserpro2diy/files/myFocuserPro2N%20NEXTION%20TFT%20DISPLAY/ myFP2M - Ready made Controllers https://sourceforge.net/projects/arduinoascomfocuserpro2diy/files/myFocuserPro2M/ Please look in the Files-Documents folder for more information. ...

...https://sourceforge.net/projects/arduinoascomfocuserpro2diy/files/Documentation/Nema-Stepper-Motors.xlsx/download Spreadsheets to calculate CFZ https://sourceforge.net/projects/myfocuserpro2-esp32/files/CFZ%20Spreadsheets/CFZ%20Spreadsheets.zip/download Focuser Basics Guide (PDF) - shows how to derive the correct motor requirements for your system (mandatory reading) https://sourceforge.net/projects/myfocuserpro2-esp32/files/Documentation/Focuser%20Basics.pdf/download Part1: Download, Configuration and Programming https://youtu.be/90KeSspN3e0 Project is superceded by myESP32S3-N16R8 WiFi Focuser

A 3-channel fully automated Dew Controller (DIY project) based on Arduino Nano for telescopes. For $48 or less. (c) Copyright Robert Brown 2014-2025. All Rights Reserved. Permission is granted for personal and Academic use only. Code or portions of code may not be copied or used without appropriate credit given to author. A very popular project with over 48,000 downloads.

Open HPI is an open source implementation of the SA Forum's Hardware Platform Interface (HPI). HPI provides an abstracted interface to managing computer hardware, typically for chassis and rack based servers. The new location for the project is https://github.com/open-hpi/openhpi

One click will do any of the following actions: * Restart Windows * Shut the machine down * Log out the current user After clicking the shortcut icon, you have 10 seconds to cancel the operation. During that time, you can also switch to one of the other options. Project has been tested with 32-bit XP and 64-bit bit versions of Vista and Windows 7. This project was created for the author's personal use and was published for you convenience. It may or may not work on your machine. The only known requirement is .NET 3.0, but might run on older versions of .NET. Version 1.5 adds: * The ability to trigger cause your firmware (BIOS or UEFI) to start on the next boot * The ability to have the advanced Windows boot options shown on the next boot...

...This wrapper uses 'PInvoke' (like peek/poke) to 'martial' calls from managed to unmanaged code. It sounds complicated, and it is. IT IS ALSO TOTALLY UNNECESSARY. Why not have the DLL as managed code?? Why not simply reference the library in your project and just call its functions?? This project does just that Licence: LGPLV3.: In summary, the only thing we ask is if you improve / bugfix / extend the library then feed these changes back into the project by emailing jon_newcomb or requesting sourceforge access. Applications you develop that use this library are not covered by this licence and can remain closed source and commercial

This application provides a serial interface for the Spaceball 6DOF mouse to let it work with the vJoy project (http://vjoystick.sourceforge.net/). Currently supports early spaceballs including the 3003C.

...You can find all information related to digital enlightenment on http://www.digital-enlightenment.de (german page) To run the application, you have to get the usbdmx.dll from the digital enlightenment website (http://www.digital-enlightenment.de/usbdmx.htm). The dll is part of the project archive linked at the bottom. You also need nlog for the library to compile. The project is configured with nuget to make it easier to get the required packages.

Brahma is an open-source library written for the .NET 3.5 framework (in C# 3.0), to provide high-level access to parallel streaming computations on a variety of processors, including GPUs.

Pyramid Computer delivers its server with an LCD Display. This project implements an Windows Service controlling the output of the display and enable the user to show the values he needs. The service is implemented under C#.Net.

This project aims to provide a lightweight and easy to use library for interfacing with the Wii Remote. Applications that demonstrate the use of the library and the Wii Remote have also been developed.

A Vista driver for the DX1 pad written (nearly) entirely in C#. The project is based on libusb (Win32) and SharpUSBLib.

This project uses massively parallel Graphics Processing Units(GPU) for neural network(Backpropagation) purposes.

Project Fish is a start kit for those who want to have study with ARM/PCB/DDK/.Net. PF will start from a Digital thermometer, with the implement of Hard ware design, firmware, Windows driver and app, the participator will got understading in that fields.

Driver support for 3D Controller Hardware. We hope to support SDL Input, DirectInput, and other major controller API's including game consoles and embedded systems.

This project intends to build a complete CallerID-function for home- or small buisniess environments. It depends on simple hardware which everyone can build. It will present the incomming call's number on every workstation on the network.

it will be client-server based web application that controls a telescope mount and telescope from i/o ports of server.

The goal of this project is to build a centralized domotic system. This project contents three parts: - An electronic part; - An embedded software part (PIC Microship controller); - A PC software part (Dotnet/Mono)