Search Results for "lcd"

SmartKnob is an open‑source hardware/software hybrid rotary input device featuring software-configurable end-stops and virtual detents, facilitated by a brushless gimbal motor and magnetic encoder—offering programmable haptic feedback and a novel, tactile user interface. 240x240 round LCD ("GC9A01"), protected by 39.5mm watch glass on rotor. BLDC gimbal motor, with a hollow shaft for mechanically & electrically connecting the LCD. PCB flexure and SMD resistors used as strain gauges for press detection (haptic feedback provided via the motor). USB-C (2.0) connector for 5V power and serial data/programming (CH340). Versatile back plate for mounting - use either 4x screws, or 2x 3M medium Command strips (with cutouts for accessing removal tabs after installation).

GROWbox Supervisor System (GROWSS) is a grow box or grow cabinet environmental controller. GROWSS uses a Raspberry Pi (RPI) & Grove sensors to monitor and control the environment in your grow box or cabinet. Environmental factors such as temperature, humidity, soil moisture, & smoke (from fire) are monitored and displayed on a terminal connected to the RPI & on a mobile app. GROWSS also controls the exhaust fan and grow lights based on the time interval (ie. 12 hours on/12 hours off) &...

...The FPV performance of this suite outperforms all iOS and Android FPV flight applications and supports to both SkyController 2 and SkyController 3 thru USB tethering. If you have several 46' LCD TV units connected to a Mac via HDMI or thunderbolt interfaces. This application is a game changer for you and your colleague to enjoy the most luxurious FPV experience on Parrot drones ever.

serialLCD is Arduino based open-source project. It contains ATmega8 with given firmware file & the arduino library. The ATmega8 can be replaced by ATmega168/328. ATmega8 uses its 8MHz internal oscillator to reduce hardware (atmega8 no-xtal bootloader is used). The arduino library uses SoftwareSerial internally to communicate ATmega8 via digital pin 6 (only for uno/duemilanove or clone with atmega8/168/328, not for mega & due). Only one wire simplex serial communication at baudrate 9600 is...

This software can control a standard intelligent LCD display and show any kind of information on it so it could be use as a status display on a home Network Attached Storage or a HTPC.

NOW ON GITHUB: https://github.com/MajenkoLibraries/GLCD Library to control the Winstar WG12864A (KS0108) 128x64 graphical monochrome LCD screen.

LCD Builder is a program where you can freely compose different information (CPU, Memory, Uptime etc.) with the help of a graphical user Interface. After composing the information you can easily display them on an external lcd (liquid crystal display

An OS independent implementation of the famous tool for custom LCD control - LCDHype. The program enables for complex and fully customizable screen control through easy to use scripting langauge similar to Pascal.

The project is designed for hardware engineers to generate Chinese character dot matrix of pixmap. These pixmaps can be used for showing Chinese in embeded system/enviroment such as LCD.

This program allows you to use your PalmOS device as a LCD status display for your computer! You can display system stats (such as: CPU load graphs, CPU temperatures, free disk space), news alerts, stock indexes, graphs, etc. Can be used with most LCD so

Library to handle drawing on cheap 84x48 LCD (PCD8544 controller) used in some Nokia mobile phones (for ex. 3310, 3330, 3210) via LPT port. Contains some demostration software. May be used in various applications: pc modding, system monitoring etc.

GEL is a collection of embedded libraries and examples for 68HC11 and 68HC12 microcontrollers. It provides various embedded libraries like: - a small libc - an event driven library - LCD 128x64 graphical library - robot library

Monitor your battery status and control the LCD brightness of your SonicBlue Progear 1050 Tablet PC!

The MtxOrbCtl program allows you to control a Matrix Orbital Serial LCD screen from the command line. It is designed to be used in conjunction with shell scripting to show the status of boots, etc.

An (nearly) all purpose software driver for Matrix Orbital LCD-2041 series serial interface LCDs. Displays much useful information on the LCD and allows much control. Fully configurable.