Search Results for "data bin 6"

...Firmware should work with any 3D printer firmware (repetier/marlin/smoothie ware using GCODE) if the serial connection has a correct setup. I currently use it with my personal flavor of repetier for Due based boards. The web interface files are present in the data directory but UI has its own repository ESP3D-WEBUI. Use GPIO2 to the ground to reset all settings in a hard way, 2-6 sec after boot / not before!! Set GPIO2 to ground before boot change boot mode and go to special boot that do not reach FW. Currently, boot takes 10 sec - giving 8 seconds to connect GPIO2 to GND and do a hard recovery for settings. ...

GXSM -- Gnome X Scanning Microscopy: A multi-channel image and vector-probe data acquisition and visualization system designed for SPM techniques (STM,AFM..), but also SPA-LEED/LEED/LEEM data analysis. A plug-in interface allows any user add-on data-processing and special hardware and instrument support. Latest: NC-AFM and related explorative methods as SQDM can be configured. High-Speed external PAC-PLL hardware option with digital DSP link. Based on several hardware options it supports...

This project was originally designed to provide an open-source replacement for PPJoy. The product, at this point, consists of virtual joystick devices that is seen by the system as a standard joystick but its position-data is written to it by a feeder application. An existing feeder application that takes advantage of this product is SmartPropoPlus. If you are an application writer you can very easily write an application that controls a joystick (e.g. mouse-to-joystick,...

This is an opensource project for the calculation of the mathematical constant Pi. If you are a mathematician or programer please contribute ideas or code for this project. Non professionals are also welcome to contribute.

mDriver is a utility to migrate binary device driver from Windows to Linux. It takes out the binary instruction and data from Windows driver (*.sys files), and then combine them with some supporting code to build a corresponding Linux driver module.

Linux drivers to allow ALSA audio applications to communicate over the IEEE1394/Firewire bus. This allows audio and midi data to be shared between multiple workstations and audio devices on a 1394 network, using the IEC 61883-6 protocol