Search Results for "bus"

...There are multiple competing libraries, FastLED being the biggest and Adafruit NeoPixel being the most common for beginners. On ESP32, both FastLED and NeoPixelBus can provide more than one channel/bus. FastLED primarily uses RMT to support 8 parallel channels. NeoPixelBus now supports the RMTs 8 channels and two more channels using i2s.

This library controls many Silicon Laboratories Si47xx family radio chips with an Arduino microcontroller. Major features include: • I2C and SPI bus • Supports "original" (Uno, Duemilanove, and their clones), Mega 2560, Leonardo, and Due Arduinos • FM/AM receive modes; including short, medium, and long wave AM • Analog and/or digital audio output • FM RDS and RBDS • Localization of receive bands, channel spacing, FM de-emphasis, and RDS/RBDS • Correctly decodes RBDS PI codes into station's call letters • Can handle a mix of RDS and RBDS stations as found near the US boarders with Canada and Mexico • Example programs I2C and Due support is alpha because I do not have hardware to test these features.

The CAN projects aim is to develop and maintain a CAN driver for Linux/windows that support misc. can chips/cards. Also utilities such as tracing tools, diagnostic tools and such will be published in the project. The Very Simple Control Protocol (VSCP)

tband is a daemon which exposes mCubed T-Balancer BigNG device as a user mode object available via D-Bus system.

Linux kernel level driver to allow access to the I/O of the Beckhoff CX-1100 power supply used with the Beckhoff CX-1000 embedded PC. This allows access to the K-Bus and IP-Bus of the Beckhoff system.

Linux drivers to allow ALSA audio applications to communicate over the IEEE1394/Firewire bus. This allows audio and midi data to be shared between multiple workstations and audio devices on a 1394 network, using the IEC 61883-6 protocol

Linux Kernel Modul for the CompuLAB usb from Ak-Modul-Bus

A API developed in C++ for communicate with PLC-BUS devices.