Search Results for "virtual parallel port"

This project provide a reconfigurable asynchronous SDM router which can be configured into a basic wormhole router or an SDM router with multiple virtual circuits in every direction. Features: * 5-port router for mesh network (0 south, 1 west, 2 north, 3 east, 4 local) * The dimension order routing (XY routing) * Available flow control methods: wormhole, SDM, VC * Reconfigurable number of virtual circuits, buffer size, data width * Fully synthesizable router implementation * SystemC testbench provided Languages: * Routers are written in synthesizable SystemVerilog * Test benches are provided by SystemC Software requirements: * The open source Nangate 45nm cell library * Synopsys Design Compiler (Synthesis) * Cadence IUS -- NC Simulator (for SystemC/Verilog co-simulation)

Library for handling XBee / XBee-PRO RF modules. The library is written in C and supports the following platforms: Linux (x86, MIPSel), Windows (x86), AT91 SAM7 microcontrollers.

libieee1284 is a cross-platform library for parallel port access.

hardware log monitor that will display log behaviour via various hardware (parallel port, USB devices, ...). You can specify pattern(regexp) in log(s) on which hardware will turn on. It has also some unique ways of visualization of log files.

The libtlc54x helps you to communicate with the Texas Instruments TLC548/549 A/D-Converter via serial or parallel port. With the library you need only three steps to open the device, read the data and close the device.

lpcusb is a USB core stack for the built-in USB device of LPC214x microcontrollers. It handles the hardware interface and USB enumeration/configuration. Included are usage examples like USB joystick HID, USB virtual COM port and USB mass storage on SD-ca

Input/output (IO) C library exposing a common API for real mode and permission-restricted access to parallel port under Windows, Linux and MS-DOS operative systems. It also allows pin-by-pin port access.

Currently-under-development library of OS-independent objects to provide complex parallel port control, high-resolution timers and other similar facilities needed when using PC I/O ports to control external digital electronics.

A linux client/server based LCD Driver for HD44780 compatible Display controllers connected to the parallel printer port.

A nice tool for low-level managing of the parallel port and for experimenting with it. It uses GTK+ 2 for the GUI and runs on Linux and Windows (with mingw32).

This project is aimed to porting ppbus (the parallel port abstract bus found in FreeBSD) to the NetBSD Operating System. This will allow using faster devices with NetBSD and will add IEEE 1284 support.

Simple GTK2 application allowing users to manually toggle devices attached to a parallel port device on or off (through the D0->D8 data lines), or run an automatic sequence based on a simple language contained in this program. Good for driving relays, etc

Eppnics: Electronic parallel port network interfaced control system. Eppnics allows you to control electronic circuits connected to a parallel port via a TCP/IP connection.

This program allows the user's laptop to act as a trip computer displaying fuel economy, speed, and other information about a car which is connected through a hardware device to the parallel port.

Linux/i386 kernel driver and development library to control serial CBM devices, such as the Commodore 1541 disk drive, connected to the PC's parallel port via a XM1541 or XA1541 cable. A fast disk copier included.

We are developing a suite of software to control USB I/O devices. Initially the support will be for Windows and Linux hosted Human Interface Devices (HID) although hopefully this will extend to virtual comms. port control in the future. API coming...

UniPIC is a GTK programmer software for PIC programmers based on Brian Lane\'s software that supports at least PIC16C84 and PIC16F84. It works with the parallel port and by default with microPIC Trainer.

Manage the data pins of the parallel ports (also know as lpt under win).

Portatux is an interactive ncurses interface as well as a command line tool for controlling the 8 data pins in the parallel port in Linux and FreeBSD.

The main purpose is to develop a Linux stepper motor driver module to drive two unipolar stepper motors using the parallel port. This driver has the task to enable a home-made robot to move around and uses the tank-principle to move and turn.

Meskalin is a *nix parallel port control program it allows you to easily control LED's or wetwire devices like brainwave machines ported for: FreeBSD, netBSD, openBSD and Linux

The JBlaster is a software driver that allows you to configure Altera's PLDs and FPGAs through the ByteBlasterMV in JTAG mode under Linux and Windows NT, interfaceing via the parallel Port. The JBlaster parses a Quartus II generated chain descriptio

The goal of this project is to develop an open-source implementation of the management application (and drivers if necessary) for Creative NOMAD MP3 player (the first, parallel port model).

lcdmod is a linux device driver for controlling HD44780 comatible LCD panels attached to the parallel port. It supports user generated fonts, multiple wiring schemes, multiple display sizes, and multiple driver chips. It has visualisation and control plug

Programmer for Atmel AVR microcontrolers that uses PC parallel port to program the device in serial mode. The device can be programmed "in-system". Comes with a schematic of the hardware required. Hardware designed to be simple, efficient and unexpensive.