Search Results for "gnu linux" - Page 9

Quiet Fan implements a control loop to set your CPU or motherboard fan speed. This means that it uses the lowest possible fan speed to keep a target temperature, and eliminates damaging hardware temperature oscillations.

User space Linux USB driver and GUI for ProjectLab CenturyCD carousel. Programming language is C++. Libraries: libusb, QT 4.5, SQLite(projected)

This is a simple command line tool to customize CP2103 USB to UART bridge controllers in home-grown hardware. VID, PID, product name string, serial number string, and release version of the device can be changed next to GPIO port modes.

Portable .NET driver imports for Pico USB oscilloscopes and data loggers. Verified to be working under Windows and several Linux distributions.

Multiplatform and Multiprotocol driver for QLogic Host Bus Adapters. Runs on Solaris, NetBSD, FreeBSD and Linux. Support both initiator and target mode. Supports QLogic 1020 SCSI through Qlogic 25XX FC cards.

Test script for linux wireless drivers

This is a front end to the Sony Programmable I/O Control Device Driver. This spicctrl is used for configuring screen brightness, getting battery status, getting ac status, etc...

This utility is used to format floppy disks. It replaces fdformat, and supports both floppy-controller drives and LS-120 (Superdisk) ATAPI-IDE drives.

CLuMPI (OpenCL under MPI) is an implementation of the OpenCL interface which uses MPI as a back end

Module linux kernel for upload chaosnet protocol into network layer. Server and client programm for share with lisp machine data space. Api interface for make program and service with chaosnet protocol.

RackMonkey is a tool for managing racks of equipment such as servers and switches. You can keep track of what's where, which OS it runs, who it belongs and what it's used for. RackMonkey quickly finds any device and draws a rack diagram of its location

Debian Lenny with the (in)famous unsupported intel i810 1.7.2 driver, which supportsTV-OUT. If you own i855GM and similar hardware this chrootable environment allows you to enable your DVO. Comes with fluxbox, gmplayer and the complete driver sources.

This project is largely defunct. The lpfc driver has been upstream for many years and can be readily found in the distributions. Recent driver kits can be found on the Emulex.com website as well as websites for various OEMS. OLD: This project is a development area for a Linux Device driver for Emulex Fibre Channel HBA's, targetting the Linux 2.6 kernel. For White Papers and Errata, please see the driver download area. SCST support has just been added!!

The primary aim of this project is to develop a full featured Microblaze simulator . The project is develloped only in C , then it can be easely ported.

libEPOS is a C library to control the EPOS motor control from maxon motor ( http://www.maxonmotor.com ) using a GNU/Linux system. This software is NOT from maxon motor, but was written from scratch by Marcus Hauser and others. The tar file is outdate

hardware log monitor that will display log behaviour via various hardware (parallel port, USB devices, ...). You can specify pattern(regexp) in log(s) on which hardware will turn on. It has also some unique ways of visualization of log files.

Linux ForceFeedback driver for GreenAsia (Product ID 0x12) input devices like Manta Warior and SpeedLink Strike2 and many other cheap vibration gamepads.

A simple python module to interface with DMX to USB devices

OpenVGA is an free and open FPGA-based implementation of a VGA compatible graphics adapter, and utilising low-cost hardware. The project includes the PCB schematic and artwork, Verilog HDL, firmware assembly code, and driver source code.

gnome motorola phone manager written using mono (inspired by moto4lin)

iSCSI-init boot initialization program for Linux

mmapper allows to access every resource attached to the machine. It can read and write any physical address on the memory bus, any I/O port and any field of the PCI space configuration of any peripheral.

Thermal Control (thctl) is a toolset for controlling system temperature.

unieject is a (wannabe) universal eject command, that currently works on Linux, FreeBSD and Dragonfly with an interface similar to the classic Linux eject command. It uses libcdio to access the low-level functions of CD drives, and supports USB drives ej

fprint aims to plug a gap in the open source desktop, by providing support for consumer fingerprint scanners as standard.