Search Results for "using class net.sourceforge.jtds.jdbc.driver"

Clicker is a project for a Multitasking Open-source operating system written from scratch. based on a modular micro kernel. We want to explore new way of designing and using OSes :) [newz: PCI, NE2K and VBE]

This project is about a light controlling system with a 4 RGB-LED channels to run different modes: • autonomously w/o PC performing HSI2RGB transformations and running through the color hues (with dimmable brightness) • remote operated by PC or embedded user software using the provided C++ Software library (based on Boost libraries) • ideal platform for color experiments with your RaspberryPi The system consists of 4 layers: • PCB with Atmel ATmega16 and FT232RL USB interface...

FileSystem is an OPENSOURCE program for advanced disk management with built-in drivers for PATA IDE Hard Disks and DVD/CDROM Drives, USB Mass Storage Drivers. Implemented file systems : FAT32 / ISO9660 / EXT2. It can be compiled for DOS, LINUX, WIN32

EasyFlash is a flash memory cartridge for the Commodore 64 with multiple configurations and banks possible. Since it does not use traditional UV-EPROMs but Flash memory, it is possible to "burn" the cartridge using your C64. No EPROM programmer is needed.

Maiden-core is a Linux kernel robotics API module, extensible in Erc. The Maiden Project also documents and develops the Maiden architecture for mobile robots, a set of (optional) designs and standards for robots using the Maiden-core API.

The Ogg Vorbis Player (http://www.xiph.org/ogg/vorbis/index.html) shall be implemented in form of a system-on-a-chip by using hardware/software co-design techniques using prototyping board with the open source LEON processor (http://www.gaisler.com).

HallRunner is a robotic navigation and management system. The robot will navigate using an internal map of the building, and will show it's position in real time.

M4DSP is a QRP (low power) hamradio digital signal processing (DSP) tranceiver using a comprehensive yet powerfull Cortex-M4 MCU from STMicroelectronics. The main goals are: low cost, low power consumption, IPhone-like size & weight, QRP CW RX & TX, SSB/AM/FM RX-only, digital modes by demand, GUI with TFT + touchscreen, waterfall spectrum, CAT communication link via low-speed USB, pure SDR-like mode via high-speed USB, one or more hamradio bands (160-10 m), optional support for general coverage...