Search Results for "user interface"

GXSM -- Gnome X Scanning Microscopy: A multi-channel image and vector-probe data acquisition and visualization system designed for SPM techniques (STM,AFM..), but also SPA-LEED/LEED/LEEM data analysis. A plug-in interface allows any user add-on data-processing and special hardware and instrument support. Latest: NC-AFM and related explorative methods as SQDM can be configured. High-Speed external PAC-PLL hardware option with digital DSP link. Based on several hardware options it supports a commercially available DSP hardware and provided also Open Source Code for all the low level signal processing tasks and instrument controls in a most flexible and adaptable manner. ...

This is an open source project that aims to create a MSX cartridge that acts as a old disk drive interface but in fact it will be accesing a modern SD Card. For the MSX it will be as if there is a magnetic disk drive with a real magnetic disk but for real it will be accessing a .dsk file inside a sdcard. Development tools used are: - Kicad version 2013-07-07 - Microchip XC8 v1.21 (free mode) - Micrchip MPLAB X IDE v1.90 - Altera´s Quartus Web Edition 11.0 UPDATE...

Firmware for Cypress' EZ-USB (AN2131) device that lets you use keyboards, mice etc. as USB compliant Human Interface Devices.

Clicker is a project for a Multitasking Open-source operating system written from scratch. based on a modular micro kernel. We want to explore new way of designing and using OSes :) [newz: PCI, NE2K and VBE]

This project is about a light controlling system with a 4 RGB-LED channels to run different modes: • autonomously w/o PC performing HSI2RGB transformations and running through the color hues (with dimmable brightness) • remote operated by PC or embedded user software using the provided C++ Software library (based on Boost libraries) • ideal platform for color experiments with your RaspberryPi The system consists of 4 layers: • PCB with Atmel ATmega16 and FT232RL USB interface (Eagle forat) • Firmware for applying PWM, UART communication and integrated colorspace transformations (AVR-ASM) • C++-Software for providing a HTTP-Server, a Dreambox picture grabber and basic light sequence player • HTML5/JavaScript application for remote controlling and configuring the system via Webbrowser Please use the SVN browser for accessing the whole development snapshot and getting an current tarball!

An open hardware and software platform, Octobits attempts to recreate the aesthetics of the early eight-bit computer age using cheap, powerful, and readily available modern components.

The cc3 project provides software for embedded vision systems. Currently, the software runs on the CMUcam3 hardware platform, which is a NXP LPC2106-based board with an onboard CMOS camera and FIFO, MMC interface, serial UARTs, and servo controller.

Microcontroller (AVR) based standalone digital light controllers ("dimmers"). The "Diamond" series supports 20 channels (TRIAC, FET, 0-10V, relay) with automatic fading, 20 scenes, 21 timers, IR remote, LCD, DMX-512 interface, global standby & more.

The Isis OS Project Is a Controlled Project to Develop An Advanced Modern Operating System!

This program can use some of ZX Spectum emulator files (.sna, .z80, .tap, .tzx) on real ZX Spectrum with IDE interface. It reads these files from ISO9660 filesystem. Snapshots are directly loaded and runned, tap/tzx files are emulated like standard t

Focus of this project is the development of an microcontroller/FPGA evaluation board. Basic characteristics as given below: - Philips LPC 22xx controller - additional FPGA, Xilinx Spartan - SD-Card interface for booting - additional IO-interfaces

SECU86 is Standard Engine Control Unit x86. The project goal is to develop a standard computer and OS (opensource) that would work on any car. It'll be based on the x86 processor and will try to replace the poor standard ECU that comes with any car.

The Project represents the graphic interface of programmer for Atmel microcontrollers. Owing to flexible technology of plug-ins, the interface can be easily adapted for microcontrollers of new types. The project is written in Visual C ++ and the assembler

The Simple Network Enhanced Zulu-time Device (SNEZ-D) or Aftermarket CHU Decoder (A-CHU) is a complete radio-to-interface time reference in-a-box with software that decodes the CHU radio signal, and can be interfaced to NTP servers.

Firmware and user interface code for a USB-based digital oscilloscope.

CJet eXTreme OS is a new project to develop a cross platform operating system with a native application interface designed to make it easy to develop for several architectures at once.