Search Results for "telnet-server"

The "Open On-Chip Debugger" provides JTAG/SWD access from GDB (or directly with TCL scripts) to processors with ARM and MIPS based cores. See website for full list of supported targets.

Firmware for a power supply with an ATMega32 uC. The hardware is based on the DCG of the ctlab project from the german magazine c't.

This is an add-on for the CoCo Extended Color BASIC that implements 51x24 and 64x24 text screens. All operation of the BASIC interpreter works naturally. It is developed in 6809 assembly language. It may be assembled with LWTOOLS (http://lwtools.projects.l-w.ca) under Linux, or with Windows cross-assemblers such as Chet Simpson's CASM which is included in RainbowIDE. In order to build a disk image, you will also need the Toolshed utility suite....

TTF-GDOS is a GDOS replacement that uses true type fonts as well as gem fonts. It is small, fast & efficient and can easily be used without a hard drive. It also incorporates features roughly equivalent to font-GDOS: - a caching system so you can use more fonts for a given amount of memory, - built in bezier functions This release includes ttf2gem, a utility program that creates accurate gem fonts from a true type font (new for 2.3) Using true type fonts gives you 3 big...

EQ Track purpose is to provide amateur telescope makers (ATM) with electronic board schematics and embedded software to control their telescope mount via stepping motors. EQ Track comes in different "flavors" : - "Basic" controls the right ascension and declination motors of an equatorial mount. - "Go To" controls the motors of a mount in any orientation (ie. equatorial, altazimuth, alt-alt), to point and track equatorial coordinates.

CP/M Plus on ZX Spectrum +3 has ability to load device drivers from normal disk files (with .fid extension) on boot. A Spectranet device (apart from being networking interface) contains 128kB of extra RAM that can be accessed even with the Spectranet firmware disabled. This project proposes a FID driver that exposes Spectranet's extra memory as a ramdisk to the CP/M Plus system. Changes in v1.1: keep floppy drive motor state (as set by CP/M) when paging in Spectranet RAM (to avoid motor...

CP/M Plus on ZX Spectrum +3 has ability to load device drivers from normal disk files (with .fid extension) on boot. One of the most important devices for any disk operating system is the mass storage drive. Although ZXMMC device is available on the market for years and it works well with +3e firmware, partitions created on MMC cards could not be accessed from CP/M world. At some point it became so frustrating, I decided to write FID driver for it. It's not perfect, but it works surprisingly...

JNode is a Java New Operating system Design Effort. JNode is a simple to use and install Java operating system for personal use on modern devices. Any java application runs on it, fast and safe. See our homepage for additional information.

Firmware for Cypress' EZ-USB (AN2131) device that lets you use keyboards, mice etc. as USB compliant Human Interface Devices.

Clicker is a project for a Multitasking Open-source operating system written from scratch. based on a modular micro kernel. We want to explore new way of designing and using OSes :) [newz: PCI, NE2K and VBE]

- A collection of tools for programming an Atmel AVR 8bit Microcontroler. - Circuit decriptions for Atmel AVR 8bit Microcontrolers used for testing.

This project is about a light controlling system with a 4 RGB-LED channels to run different modes: • autonomously w/o PC performing HSI2RGB transformations and running through the color hues (with dimmable brightness) • remote operated by PC or embedded user software using the provided C++ Software library (based on Boost libraries) • ideal platform for color experiments with your RaspberryPi The system consists of 4 layers: • PCB with Atmel ATmega16 and FT232RL USB interface (Eagle forat) • Firmware for applying PWM, UART communication and integrated colorspace transformations (AVR-ASM) • C++-Software for providing a HTTP-Server, a Dreambox picture grabber and basic light sequence player • HTML5/JavaScript application for remote controlling and configuring the system via Webbrowser Please use the SVN browser for accessing the whole development snapshot and getting an current tarball!

This project's goal was to develop an open source firmware for Sinus 154 DSL Basic SE and similar AR7 based devices. Projektziel war die Entwicklung einer freien Firmware für Sinus 154 DSL Basic SE und vergleichbare Geräte mit AR7-Prozessor.

An implementation of LWIP under FreeRTOS for the LPC1768/9 Cortext M3 microcontroller

An open hardware and software platform, Octobits attempts to recreate the aesthetics of the early eight-bit computer age using cheap, powerful, and readily available modern components.

This project contains test software and tutorials for Analog Devices' Blackfin DSP device drivers and system services. See the wiki (in the menu bar above) for more info.

The objectives of OCERA is the design and implementation of a library of free software components for the design of embedded real-time systems. These components will be used to create flexible, configurable, robust and portable embedded applications.

Change your desktop computer(just 386 and above right now) into a funny evolution board. Some subprojects are a Real Time OS , home automation server,....

Minirighi is a multi-threading open-source operating system written for didactic purpose. It has been written from scratch and it is compatible with POSIX.

The Yakko project is a home automation system. It defines a new protocol implemented as firmware running in AVR atmega microprocessors. The goal is to build a method to make logical connections between hardware devices such as lamps, switchers and so on.

Parallel Events and Asynchronous tasKing Library. Originally combining multi-threading with an efficient I/O event model, it's now more a lightweight object-oriented framework for event-based applications.

TINI-Flash provides Flash file system support, class libaries and utilities for the Dallas Semiconductor TINI embedded Java computer. Currently Flash support is provided as FileSystemDriver class (integrtable into SLUSH) and as command line utilities.

TI-84 Plus USB on-the-go driver.

This program can use some of ZX Spectum emulator files (.sna, .z80, .tap, .tzx) on real ZX Spectrum with IDE interface. It reads these files from ISO9660 filesystem. Snapshots are directly loaded and runned, tap/tzx files are emulated like standard t

Project Fish is a start kit for those who want to have study with ARM/PCB/DDK/.Net. PF will start from a Digital thermometer, with the implement of Hard ware design, firmware, Windows driver and app, the participator will got understading in that fields.