Search Results for "power"

Firmware for a power supply with an ATMega32 uC. The hardware is based on the DCG of the ctlab project from the german magazine c't.

EQ Track purpose is to provide amateur telescope makers (ATM) with electronic board schematics and embedded software to control their telescope mount via stepping motors. EQ Track comes in different "flavors" : - "Basic" controls the right ascension and declination motors of an equatorial mount. - "Go To" controls the motors of a mount in any orientation (ie. equatorial, altazimuth, alt-alt), to point and track equatorial coordinates.

myFocuserPro is an ASCOM and Moonlite compatible stepper motor telescope focus controller (DIY) based on Arduino Nano/Uno. A popular DIY ASCOM focuser with more than 121,000+ downloads. (c) Copyright Robert Brown 2014-2024. All Rights reserved. Permission is granted for personal and Academic use only. Spreadsheet to calculate what stepper motor to use. https://sourceforge.net/projects/arduinoascomfocuserpro2diy/files/Documentation/Nema-Stepper-Motors.xlsx/download

Since the summer of 2010, the FSAE team High Speed Karlsruhe uses Infineon's XC878 to power its electronics. The XC878 is an 8052 compatible 8-bit µC. Our dedication is to 8-bit real time applications, guaranteed by the powerful peripherals of the XC878. This project aims to publish those portions of our code, which may be of use to a wider audience.

Replace a Vehicle Wiring Harness with a simple CAN network and unified power distribution. Based on ATMEL AVR microcontrollers and Microchip MCP25050 CAN I/O expanders.

Powertweak-Linux is a port of the similarly named Microsoft Windows tool. It optimises your system to run at peek performance, by adjusting hardware settings, and config files. Work is underway in CVS to add features such as additional power management by

Open Power will be a CPU cooling software for Win 9x (like rain but open source), it is partially based on the source code of KCPUCooler by Kirys Tech 2000.

This SourceForge project hosts the software component of the Open Source Motor Control project. The purpose of this project is to create an Open Source high-power H-bridge motor speed control system for DC permanent magnet motors.

M4DSP is a QRP (low power) hamradio digital signal processing (DSP) tranceiver using a comprehensive yet powerfull Cortex-M4 MCU from STMicroelectronics. The main goals are: low cost, low power consumption, IPhone-like size & weight, QRP CW RX & TX, SSB/AM/FM RX-only, digital modes by demand, GUI with TFT + touchscreen, waterfall spectrum, CAT communication link via low-speed USB, pure SDR-like mode via high-speed USB, one or more hamradio bands (160-10 m), optional support for general coverage RX (0-30 MHz).