Search Results for "virtual controller vjoy"

This project was originally designed to provide an open-source replacement for PPJoy. The product, at this point, consists of virtual joystick devices that is seen by the system as a standard joystick but its position-data is written to it by a feeder application. An existing feeder application that takes advantage of this product is SmartPropoPlus. If you are an application writer you can very easily write an application that controls a joystick (e.g. mouse-to-joystick,...

can4linux is hosted on https://gitlab.com/hjoertel/can4linux since 2016. Don't use SourceForge anymore for this code. can4linux is an universal Linux device driver for ISA or PCI interface boards with CAN interface and embedded CAN controller solutions. Based on the API provided by can4linux commercial protocol stacks for CANopen, J1939 and DeviceNet are available. A first PCI board with an FPGA based CAN FD controller is supported (TARGET=IXXAT_IB500) in the CAN FD ISO mode but also non-ISO

ASCOM driver for the LittleFoot Elegance Photo (LFEP) telescope controller. Firmware 6.x is fully supported - firmware 5.x is partially supported (all LFEP features are available but configuration is only possible by handbox). Contains drivers for telescope, focuser, camera, filter wheel, roof controller and dew heater which shares a single connection to the controller.

Custom vJoy feeder code for Leap Motion controller. You will need the Leap Motion SDK from Leapmotion.com as well as vJoystick installed along with the vJoystick 2.02 SDK from http://vjoystick.sourceforge.net/ See the wiki for more info.

This is a .NET wrapper library for vJoy, a virtual joystick driver for Windows. It only works with the PPJoy-compatible versions of vJoy. http://sourceforge.net/projects/vjoystick/ Some code borrowed from PPJoyWrapper http://sourceforge.net/projects/ppjoylib/ See the wiki for usage instructions.