Search Results for "pcb-gcode"
Sort By:
Showing 23 open source projects for "pcb-gcode"
View related business solutions-
Stop Cyber Threats with VM-Series Next-Gen Firewall on AzureGain integrated visibility across all traffic in a single pass. Deploy Palo Alto Networks VM-Series to determine application identity and content while automating security policy updates via rich APIs.
-
MongoDB Atlas runs apps anywhereMongoDB Atlas gives you the freedom to build and run modern applications anywhere—across AWS, Azure, and Google Cloud. With global availability in over 115 regions, Atlas lets you deploy close to your users, meet compliance needs, and scale with confidence across any geography.
-
1
ESP3D
FW for ESP8266/ESP8285/ESP32 used with 3D printer
This firmware allows not only to have a cheap bridge between Wifi and serial, but also to have a web UI to configure wifi, to monitor 3D printer and even control it, and to make things easy, UI is fully customizable without reflashing FW. Firmware should work with any 3D printer firmware (repetier/marlin/smoothie ware using GCODE) if the serial connection has a correct setup. I currently use it with my personal flavor of repetier for Due based boards. The web interface files are present in the data directory but UI has its own repository ESP3D-WEBUI. Use GPIO2 to the ground to reset all settings in a hard way, 2-6 sec after boot / not before!! Set GPIO2 to ground before boot change boot mode and go to special boot that do not reach FW. ... -
2
Agat Hardware
Create replicas of Agat Hardware
This project is dedicated to creation PCB replicas of Agat Hardware. Most of the PCBs are created using Kicad Open source tool. -
3
myFP2ESP32-Dev WiFi ASCOM Focuser
ASCOM-INDI ESP32-Dev Wifi focuser
An ESP32-Dev WiFi focuser. DIY or PCB designs. (c) Robert Brown 2014-2025, Holger M, 2019-2021. All rights reserved. Code or portions of code may not be copied or used without appropriate credit given to authors. Spreadsheet to calculate what stepper motor to use. https://sourceforge.net/projects/arduinoascomfocuserpro2diy/files/Documentation/Nema-Stepper-Motors.xlsx/download Spreadsheets to calculate CFZ https://sourceforge.net/projects/myfocuserpro2-esp32/files/CFZ%20Spreadsheets/CFZ%20Spreadsheets.zip/download Focuser Basics Guide (PDF) - shows how to derive the correct motor requirements for your system (mandatory reading) https://sourceforge.net/projects/myfocuserpro2-esp32/files/Documentation/Focuser%20Basics.pdf/download Part1: Download, Configuration and Programming https://youtu.be/90KeSspN3e0 Project is superceded by myESP32S3-N16R8 WiFi Focuser -
4
JxMake
A Java-based cross-platform build system.
JxMake is a Java-based, cross-platform build system primarily inspired by the syntax and features of GNU Make, Perforce Jam, and CMake. In addition, JxMake provides several capabilities not typically found in other console-based build systems, including a built-in lightweight GUI, serial console, serial plotter, multi-MCU in-system programmer, and more. Currently, JxMake's loadable libraries (build scripts) are primarily designed for non-OS MCU systems and experimental use. Full... -
$300 Free Credits for Your Google Cloud ProjectsLaunch your next project with $300 in free Google Cloud credits—no strings attached. Test, build, and deploy without risk. Use your credits across the entire Google Cloud platform to find what works best for your needs. After your credits are used, continue with always-free tier services. Only pay when you're ready to scale. Sign up in minutes and start exploring.
-
5
Arduino ASCOM Focuser Pro DIY
Arduino Focuser, fully ASCOM complaint
myFocuserPro is an ASCOM and Moonlite compatible stepper motor telescope focus controller (DIY) based on Arduino Nano/Uno. A popular DIY ASCOM focuser with more than 121,000+ downloads. (c) Copyright Robert Brown 2014-2024. All Rights reserved. Permission is granted for personal and Academic use only. Spreadsheet to calculate what stepper motor to use. https://sourceforge.net/projects/arduinoascomfocuserpro2diy/files/Documentation/Nema-Stepper-Motors.xlsx/download -
6
HelloWord-Smart Keyboard
High-end modular keyboard platform with deep customizability
HelloWord-Keyboard is a high-end modular keyboard platform where both the hardware and firmware are designed from scratch to provide deep customizability and advanced features. The project comprises a main keyboard PCB (STM32F103), a dynamic module (STM32F405) with additional features like an e-ink screen, OLED display and a haptic/motorized knob, a base/dock module with USB hub functionality, and other supporting PCBs. The firmware includes high-speed scanning of keystrokes, RGB lighting control via SPI/DMA, HID keyboard enumeration, multiple key-layer mapping and non-volatile configuration storage. ... -
7
SmartKnob
Haptic input knob with software-defined endstops and virtual detents
SmartKnob is an open‑source hardware/software hybrid rotary input device featuring software-configurable end-stops and virtual detents, facilitated by a brushless gimbal motor and magnetic encoder—offering programmable haptic feedback and a novel, tactile user interface. 240x240 round LCD ("GC9A01"), protected by 39.5mm watch glass on rotor. BLDC gimbal motor, with a hollow shaft for mechanically & electrically connecting the LCD. PCB flexure and SMD resistors used as strain gauges for press detection (haptic feedback provided via the motor). USB-C (2.0) connector for 5V power and serial data/programming (CH340). Versatile back plate for mounting - use either 4x screws, or 2x 3M medium Command strips (with cutouts for accessing removal tabs after installation). -
8
HoloCubic
Multi-function transparent display desktop station
...Built around an ESP32 PICO-D4 microcontroller, a 1.3″ 240×240 ST7789 display and MPU6050 inertial sensor, the device allows you to build a “floating hologram” style display module with additional networked visual features like weather display or follower counts. The hardware design includes versions of the PCB (Naive version, Ironman version) and 3D model files for the enclosure (3D printed or CNC metal). The software leverages LVGL (a GUI library for microcontrollers) and supports surface touch or IMU-based input. Because it connects via WiFi/Bluetooth, it can fetch live data and display dynamic content, bridging embedded display, network, and interactive gadget design. -
9
L-ink_Card
Smart NFC & ink-Display Card
L-ink Card is a smart NFC card with an electronic-ink display built into the card form-factor, aimed at solving everyday pain points of IC cards and giving them a “cooler” interface. The project uses an STM32L0-series microcontroller paired with an ST25DV NFC chip, an e-ink screen, and battery management so the card can display dynamic info while also serving as an NFC tag/card. Its functionality may include showing balance, last transaction, QR codes, or other custom info on the e-ink... -
Our Free Plans just got better! | Auth0You asked, we delivered! Auth0 is excited to expand our Free and Paid plans to include more options so you can focus on building, deploying, and scaling applications without having to worry about your security. Auth0 now, thank yourself later.
-
10
myUSBCtrlr
myUSBCtrlr
4Port USB2.0 controller (Arduino Nano) which you can connect/disconnect ports using remote software application. Ideal for Astronomy solutions such as focusers, cameras CCD, filters etc. Windows application provided for remote control. (c) Copyright Robert Brown 2014-2020. All Rights Reserved. Permission is granted for personal and Academic use only. Code or portions of code may not be copied or used without appropriate credit given to author. -
11
stm32f7nucleo-eastrising-7inch-lcd-spi
STM32 Nucleo STM32F746ZG interface to East Rising 7 inch LCD Panel
An STM32 Nucleo-144 development board with Arduino Uno Rev3 connectivity is interfaced via an EastRising Technology Co Ltd Shield PCB to the East Rising 800x480 pixel 7 inch LCD panel with resistive touch screen. A set of functions has been developed to drive the panel via SPI, which uses the RAiO Technology Inc RA8875 TFT-LCD controller IC. Test firmware was developed that uses this function set to explore and demonstrate the many capabilities of the panel. The STM library is used along with FreeRTOS. ... -
12
DIY Arduino Boards IO I2C
DIY Arduino Boards for IO using port expanders and I2C
DIY Arduino Boards PCF8674 MCP23017 74HC595 CD4021 I2C Parallel IO Piezo buzzers See the Files section for a wide range of sensors and sample code Schematics PCB Layout Sample Code -
13
MSX Disk Interface Emulator
A Interface to adapt modern SD Card to the old MSX computers
...Development tools used are: - Kicad version 2013-07-07 - Microchip XC8 v1.21 (free mode) - Micrchip MPLAB X IDE v1.90 - Altera´s Quartus Web Edition 11.0 UPDATE 2014-11-05 =============== Now it is working and the SVN repositories has it all: Schematics, PCB layout, firmware for the CPLD and the firmware for the MCU. But you have to download by your own the firmware for the 49F010 on the internet. -
14
G-CNC Sender
GCode sender for ramps and marlin firmware for CNC Milling Machine
GCode sender for ramps and marlin firmware for CNC Milling Machine 3D preview RS232 and RS232 over TCP drivers Full GComands control, disable, replace, pause. Full machine control Remap XYZ coordinates GComands description After install select Help->Check for updates.. -
15
RGBLightControl
LED Color Control System for RaspberryPi and Dreambox
This project is about a light controlling system with a 4 RGB-LED channels to run different modes: • autonomously w/o PC performing HSI2RGB transformations and running through the color hues (with dimmable brightness) • remote operated by PC or embedded user software using the provided C++ Software library (based on Boost libraries) • ideal platform for color experiments with your RaspberryPi The system consists of 4 layers: • PCB with Atmel ATmega16 and FT232RL USB interface (Eagle forat) • Firmware for applying PWM, UART communication and integrated colorspace transformations (AVR-ASM) • C++-Software for providing a HTTP-Server, a Dreambox picture grabber and basic light sequence player • HTML5/JavaScript application for remote controlling and configuring the system via Webbrowser Please use the SVN browser for accessing the whole development snapshot and getting an current tarball! -
16
Free general purpose loader tool for ATMEL's AVR controllers using arduino board or FTDI's FT232. PCB Files also available.
-
17
All design related files for a general purpose PCB, hosting a Microchip dsPIC33FJ256MC710 part. Includes gEDA schematic and layout files, BOM, etc... The card will include power regulation, SD memory card, in-circuit programming support, etc...
-
18
ShapeOko CNC Mill
open hardware CNC machine
NOTE: THIS IS LEGACY DATA AND AN OLD DESIGN KEPT AROUND FOR POSTERITY'S SAKE ONLY. FOR CURRENT DESIGN INFORMATION AND PROJECT UPDATES SEE WWW.SHAPEOKO.COM A fully open source CNC project based around the arduino microcontroller, Ponoko (the world's easiest making system), and Sparkfun. Complete drawings, and assembly documentation will be provided. -
19
OpenVGA is an free and open FPGA-based implementation of a VGA compatible graphics adapter, and utilising low-cost hardware. The project includes the PCB schematic and artwork, Verilog HDL, firmware assembly code, and driver source code.
-
20
Barracuda is a circuit board analyzer that analyze PCB and make sure the new boards doesn't contain errors Barracuda has now his first release, The error detection works fine, but it require to much calibration to get good pictures.
-
21
This project aims to build a USB 2.4-GHz transceiver, based on a reference design published by Cypress Semiconductor. The software, firmware and hardware design are included (open source). Hardware will be designed using the gEDA tools (including PCB).
-
22
Project Fish is a start kit for those who want to have study with ARM/PCB/DDK/.Net. PF will start from a Digital thermometer, with the implement of Hard ware design, firmware, Windows driver and app, the participator will got understading in that fields.
-
23
The Open USB FXS project aims at producing a very low-price USB FXS board. The project contains all necessary files to reproduce the board PCB, the board's firmware and PC software.
- Previous
- You're on page 1
- Next
