Search Results for "detection"

Betaflight is flight controller software (firmware) used to fly multi-rotor craft and fixed wing craft. This fork differs from Baseflight and Cleanflight in that it focuses on flight performance, leading-edge feature additions, and wide target support. Betaflight supports a wide range of flight controllers with at least an STM32F4 MCU. You can use nearly any piece of modern hardware out there. Full telemetry and high refresh rate for receivers, camera and VTX control, RGB LEDs, and much...

This extension uses not only smartctl (smartmontools) but other available tools to determine the existance of an HDD and as much as possible of its status. As a Zabbix "auto-discovery" process, these results can reflect changes in available HDD in near-to-real-time.

libusbK is a complete driver/library solution for vendor class usb device interfaces. If you are a usb developer or usb device manufacturer seeking a driver solution for a new USB widget then libusbK could be for you. libusbK encompasses a 100% WinUSB compatible api/funtion set. All WinUSB power/pipe polices are fully supported by the libusbK driver. In Addition, libusbK has full support for isochronous endpoints and an extensive set of additional modules to simplify development. Source...

[En] San-Libs fix the device detection error when the scanner driver is already installed in Linux Ubuntu (16-17-18.x.), Linux Mint, and other Debian like versions. San-Libs utility will relocate the Sane libraries and set the configuration files to detect your scanner. [Fr] San-Libs corrige l’érreur de détection du scanner alors que le pilote est installé sur Ubuntu (16-17-18.x.), Linux Mint, et autres versions issues de Debian. L’utilitaire San-Libs va reloger des librairies et reconfigurer...

CUPS back-end for the canon printers using the proprietary USB over IP BJNP protocol. This back-end allows Cups to print over the network to a Canon printer. The design is based on reverse engineering of the protocol. Version 2.0 adds ink-level reporting and improved out-of-paper detection. Version 2.0.1 is now released under GPLv2 or later to be compatible with the changed cups license. No other changes. Version 2.0.2 fixes a compile error with GCC9 Version 2.0.3 Fix GCC10 compile errors...

Interrupt-Driven Software UART based on Atmel Software Framework , tested on SAM3 Cortex M3 at 57600bps Start bit detection is managed by programmed GPIO falling edge interrupt handler, For bit timing is used timer counter, compare interrupt handler. Timer handler raises every 0.5 bit time periode and data sampling is managed by state machine in timer handler subroutine. Software can be used for any pin which supports external interrupt.

... performance to other computers and prevent hardware failures. Dynamic software detection keeps track of your operating system and what's installed on it. This includes software licenses, drivers, processes, anti-virus definition files, security updates and much more. Real-time hardware monitoring helps you keep an eye on your investment by providing visuals on your system's thermal and power levels as well as its overall health at all times.

This projet is aimed to provide a full replacement for asus "CloseLid". Why : - Close lid lack some function (ex: tent mode) - Close lid is cpu-hungry => make my fan spin. How : - a c# windows service app - a desktop app - a metro front-end app Functionalities : - switch screen configuration - auto-swith mode (close lid detection) - enable/disable the touch screen - pen-compliant - icon tray - settings On the road: - solution for brightness level for tablet screen (i think it's...

Frexhwd is a simple and small Hardware Detection for Linux. It is written in Unix shell(Bash) and C Language. it easy to run on small, embedded or simple system.

Barracuda is a circuit board analyzer that analyze PCB and make sure the new boards doesn't contain errors Barracuda has now his first release, The error detection works fine, but it require to much calibration to get good pictures.

CPU Informer - CPU recognition program. A very useful tool for CPU detection. It recognizez all types of x86 CPU's including new Intel and AMD Dual Core CPUs. Also CPU Informer can work with most popular LPC SuperIO sensors.

kudev is a pyQt software which helps users create and manage easily their udev rules. Three main steps are done : detection, udev rule writting, fstab writting.

This is a real-time scheduler for Linux running in the interrupt context. The real-time processes are nearly normal functions of an user process which are just registered at the real-time scheduler. Features: easy debugging, hangup detection, priorit

PC-TEST is a hardware detecting & testing tool (detection, benchmark, stress-test, S.M.A.R.T., etc.). It is developed to run on any Intel x86 compatible PC (including 8086 PC/XT). It runs perfectly under DOS but compatible with Windows & DosEmu.

Hardware detection library for GCC. Trying to detect all possible information about your hardware including EIDE, CPU, Sound, Ports, Mouse, PCI, Net, Graphic and many more.

Software to support TASS, The Amateur Sky Survey. We are taking photometric measurements of all stars in the sky in several filters measurements repeated frequently to allow detection of variable stars