Search Results for "computer network projects"

...Keyboards powered by QMK are Planck, Preonic, ErgoDox EZ, Clueboard, Cluepad, Gergo, Georgi, and Atreus. QMK is compatible with lots of other community-supported keyboards and projects. QMK is developed and maintained by Jack Humbert of OLKB with contributions from the community, and of course, Hasu.

WLan Driver 802.11n Rel. 4.80.28.7.zip is a compressed file containing drivers for a wireless network adapter that supports the 802.11n Wi-Fi standard. These drivers enable your computer to communicate with and control the Wi-Fi hardware, allowing it to connect to wireless networks. To install it, you would unzip the file and run the installer or manually update the driver through your system’s device manager. The WLan Driver 802.11n Rel. 4.80.28.7.zip is typically for wireless network adapters that support the 802.11n Wi-Fi standard. ...

An ESP32-Dev WiFi focuser. DIY or PCB designs. (c) Robert Brown 2014-2025, Holger M, 2019-2021. All rights reserved. Code or portions of code may not be copied or used without appropriate credit given to authors. Spreadsheet to calculate what stepper motor to use. https://sourceforge.net/projects/arduinoascomfocuserpro2diy/files/Documentation/Nema-Stepper-Motors.xlsx/download Spreadsheets to calculate...

This is an add-on for the CoCo Extended Color BASIC that implements 51x24 and 64x24 text screens. All operation of the BASIC interpreter works naturally. It is developed in 6809 assembly language. It may be assembled with LWTOOLS (http://lwtools.projects.l-w.ca) under Linux, or with Windows cross-assemblers such as Chet Simpson's CASM which is included in RainbowIDE. In order to build a disk image, you will also need the Toolshed utility suite....

LinuxHardware Suite (portable/AppImage) ================================ Want to know what's inside your computer? That's exactly what LinuxHardware Suite is made for — without having to use the terminal every time and without installing any additional software. The software is available in German and English. More information and screenshots can be found in the forum: https://sourceforge.net/p/linuxhardware-info/discussion/lwi/thread/21ccc5b145/ License: Freeware (Closed...

Collect info about windows machines on your network, no matter if Lan or WAN. Slow and light process, day by day runs and add some more item. Very low effort for management, just put your subnet and set some schedule, after a couple of week the most of your machines will be in DB. After you collected data you can view them grouped and merged in variuous way. The core is wmic, a windows program that can get (almost) ALL info about every machine such as architecture, disk size,...

...This IDE supports Linux kernel configuration, compilation & emulation, system call development and device driver development. LinK+ IDE includes various templates in the category of character, block and network device driver subsystems for device driver development. It includes various bus infrastructure templates and also provides Linux device driver code completion, code assistance & code navigation for developers. Download - LinK+ IDE for 32 & 64-bit architecture : https://sourceforge.net/projects/linkplustest/files/installers/ LinK+ Update Site (compatible with Eclipse IDE v3.6.x ): http://sourceforge.net/projects/linkplustest/files/repository/ User Manual: http://sourceforge.net/projects/linkplustest/files/documentation/LinK%2B_UserManual_Rev4.pdf

A virtual floppy drive that mounts image files (*.img) as new browseable computer resources. Tested from WinXP (32bit) to Win7 (64bit). Derived from: https://sourceforge.net/projects/vfd/

With this tool you can view TCP/IP configuration on any registered network connection on the local computer. This is nice for businesses that don't let you get to my computer or command prompt to view this info.

The CAN projects aim is to develop and maintain a CAN driver for Linux/windows that support misc. can chips/cards. Also utilities such as tracing tools, diagnostic tools and such will be published in the project. The Very Simple Control Protocol (VSCP)

The GXPing component determines methods, with which GXPing component detects, if a remote computer is reachable. A successful Ping indicates that the remote host can be reached on the network.

Expansion card for 8 bit computer Sharp MZ-800. Connection to SD / MMC card with FAT16 filesystem. Emulated FD controller. MZF repository. This project is already stoped. Please see the MZ800 Unicard 2nd generation https://sourceforge.net/projects/mz800ukp1/

IRM is a Web-based asset tracking and trouble ticketing system built for IT departments and helpdesks. It keeps detailed information on both hardware and software, including each computer and network device in your organization.

AtomicGPSClock is a low cost alternative to keep precise time on your computer. It utilizes any GPS that outputs the NMEA 2.0 protocol via RS-232 to accurately set a computers clock. For standalone, mobile, or network (SNTP) installations.

AKO provides hardware and software for rapid prototyping and development of robotic projects. It utilizes a distributed microcontroller network with a centralized controller.

A cycle-accurate interconnection network simulator. Brought to you by the Concurrent VLSI Architecture group at Stanford University. The SourceForge website is no longer actively maintained. Instead, please follow the link in the profile.