Search Results for "access control system"
Sort By:
Showing 425 open source projects for "access control system"
View related business solutions-
Full-stack observability with actually useful AI | Grafana CloudBuilt on open standards like Prometheus and OpenTelemetry, Grafana Cloud includes Kubernetes Monitoring, Application Observability, Incident Response, plus the AI-powered Grafana Assistant. Get started with our generous free tier today.
-
$300 Free Credits to Build on Google CloudStart your next project with $300 in free Google Cloud credit. Spin up VMs, run containers, query petabytes in BigQuery, or build agents with Gemini Enterprise Agent Platform. Once your credits are used, keep building with 20+ always-free tier products including Compute Engine, Cloud Storage, GKE, and Cloud Run functions. No commitment required—just sign up and start building.
-
1
Fan Control
Highly customizable fan controlling software for Windows
Fan Control is a Windows utility designed to give users fine-grained, customizable control over system fans (CPU, GPU, case, etc.) based on temperature and sensor inputs. Rather than relying solely on BIOS fan curves, it allows dynamic adjustment of fan behaviour at the operating-system level — letting you react to real-time load, mix multiple sensors (CPU, GPU, motherboard, drives, etc.), and define custom fan-speed curves for different situations. -
2
Macs Fan Control
Control fans on Apple computers
Macs Fan Control is an open-source repository supporting the development of Macs Fan Control, a powerful macOS utility that gives users granular control over the thermal behavior of Apple computers. While the GitHub repo primarily tracks issues, feature requests, and localization files for the application, the utility itself allows real-time monitoring and control of fan speeds based on temperature sensors, helping users balance cooling performance and acoustics. ... -
3
AlienFX Tools
Alienware systems lights, fans, and power control tools and apps
...Enthusiasts use it to tailor lighting aesthetics and system responsiveness, especially on systems where official Alienware control panels are unavailable or problematic. -
4
ESP3D
FW for ESP8266/ESP8285/ESP32 used with 3D printer
...Set GPIO2 to ground before boot change boot mode and go to special boot that do not reach FW. Currently, boot takes 10 sec - giving 8 seconds to connect GPIO2 to GND and do a hard recovery for settings. Complete configuration by web browser (Station or Access point) or by Serial/telnet commands. -
Custom VMs From 1 to 96 vCPUs With 99.95% UptimeLive migration and automatic failover keep workloads online through maintenance. One free e2-micro VM every month.
-
5
Steam Deck Tools
Fan, Overlay, Power Control and Steam Controller for Windows
...Because this software interacts with low-level system controls, its use carries some risk of instability, and it’s provided on a best-effort basis with documentation on installation and troubleshooting. -
6
FanCtrl
FanCtrl allows you to automatically control the fan speed
FanCtrl is a Windows desktop utility focused on automatically controlling PC fan speeds using temperature sensors and customizable fan curves, so your cooling behavior matches how you actually use your system. It combines monitoring and control in one place, letting you view temperatures, fan RPM, and control percentages while you tune how aggressively each fan responds. The project supports a range of control backends and integrations, including motherboard fan headers and several popular cooling ecosystems, and it can also pull sensor data from common monitoring tools so your fan logic can react to the readings you trust. ... -
7
libusb
A cross-platform library to access USB devices
libusb is a library for USB device access from Linux, macOS, Windows, OpenBSD/NetBSD, Haiku and Solaris userspace. It is written in C (Haiku backend in C++) and licensed under the GNU Lesser General Public License version 2.1 or, at your option, any later version. libusb is a C library that provides generic access to USB devices. It is intended to be used by developers to facilitate the production of applications that communicate with USB hardware. Using a single cross-platform API, it... -
8
Stats
macOS system monitor in your menu bar
Stats currently supported on macOS 10.13 (High Sierra) and higher. Stats is an application that allows you to monitor your macOS system. CPU utilization, GPU utilization, memory usage, disk utilization, sensors information (Temperature/Voltage/Power), battery level, network usage, fans speed, fan control, and Bluetooth devices. Supports many languages, such as English, Polski, Українська, Русский, and many more. You can help by adding a new language or improve existing translation. -
9
Tasmota
Alternative firmware for ESP8266 with easy configuration
Alternative firmware for ESP8266 with easy configuration using webUI, OTA updates, automation using timers or rules, expandability and entirely local control over MQTT, HTTP, Serial or KNX. Unless your Tasmota powered device exhibits a problem or you need to make use of a feature that is not available in the Tasmota version currently installed on your device, leave your device alone - it works so don't make unnecessary changes! If the release version (i.e., the master branch) exhibits... -
AI-powered service management for IT and enterprise teamsGive your IT, operations, and business teams the ability to deliver exceptional services—without the complexity. Maximize operational efficiency with refreshingly simple, AI-powered Freshservice.
-
10
Synergy Core
The keyboard and mouse sharing tool
This is the open source core component of Synergy, a keyboard and mouse sharing tool. Control your computers with one mouse and keyboard. Control multiple computers using only one keyboard and mouse. Focus on developing software, designing, gaming and remove time switching between operating systems. Throw away the extra keyboards and spend time where it really matters. Simplify your workspace by combining multiple computers into one. Easily copy and paste between computers with no effort at... -
11
OptiKey
Open source assistive on-screen keyboard that runs on Windows
OptiKey is an assistive on-screen keyboard designed to bring keyboard control, mouse control and speech to people with motor and speech limitations. Completely free, open source and compatible with low cost eye-tracking devices, it is a great alternative to often expensive and complicated AAC (alternative and augmentative communication) products. It can also be used as an alternative to a physical keyboard or mouse. OptiKey runs on Windows and works right out of the box once an... -
12
Betaflight
Open Source Flight Controller Firmware
Betaflight is flight controller software (firmware) used to fly multi-rotor craft and fixed wing craft. This fork differs from Baseflight and Cleanflight in that it focuses on flight performance, leading-edge feature additions, and wide target support. Betaflight supports a wide range of flight controllers with at least an STM32F4 MCU. You can use nearly any piece of modern hardware out there. Full telemetry and high refresh rate for receivers, camera and VTX control, RGB LEDs, and much... -
13
Lan Mouse
mouse & keyboard sharing via LAN
Lan Mouse is a mouse and keyboard-sharing software similar to universal control on Apple devices. It allows for using multiple PCs with a single set of mouse and keyboard. This is also known as a Software KVM switch. The primary target is Wayland on Linux but Windows MacOS and Linux on Xorg have partial support as well (see below for more details). Focus lies on performance and a clean, manageable implementation that can easily be expanded to support additional backends like e.g. Android, iOS. -
14
Mos
A lightweight tool used to smooth scrolling and set scroll direction
A lightweight tool used to smooth scrolling and set scroll direction independently for your mouse on MacOS. Mos separates the touchpad and mouse scrolls independently, then, you can set the direction of the touchpad and mouse wheel separately. Also, Mos provides smooth scrolling for your mouse, whether you are a Windows user or a MacOS, you can move freely. Mos's special interpolation algorithm can make every mouse roll as smooth and silky as possible. Mos can independently manage the... -
15
Redshift JDBC Driver
Redshift JDBC Driver. It supports JDBC 4.2 specification
The Amazon JDBC Driver for Redshift is a Type 4 JDBC driver that provides database connectivity through the standard JDBC application program interfaces (APIs) available in the Java Platform, Enterprise Editions. The Driver provides access to Redshift from any Java application, application server, or Java-enabled applet. It builds redshift-jdbc42-{version}.jar and redshift-jdbc42-{version}.zip files under target directory. The jar file is the Redshift JDBC driver.The zip file contains the... -
16
Blynk C++ Library
Blynk library for embedded hardware
Blynk is the most popular Internet of Things platform for connecting any hardware to the cloud, designing apps to control them, and managing your deployed products at scale. With Blynk Library you can connect over 400 hardware models (including ESP8266, ESP32, NodeMCU, all Arduinos, Raspberry Pi, Particle, Texas Instruments, etc.)to the Blynk Cloud. With Blynk apps for iOS and Android apps you can easily drag-n-drop graphic interfaces for any DIY or commercial project. It's a pure WYSIWG... -
17
MongoDB NodeJS Driver
The MongoDB Node.js driver
The MongoDB Node.js driver allows Node.js applications to connect to MongoDB and work with data. The driver features an asynchronous API which allows you to interact with MongoDB using Promises or via traditional callbacks. Whether you are new to MongoDB or you just want to brush up on the core concepts, you can check out the Fundamentals section which features material on using the Node.js driver. The connection URI is the set of instructions that the driver uses to connect to a MongoDB... -
18
Arduino FOC
Arduino FOC for BLDC and Stepper motors
We live in very exciting times 😃! BLDC motors are entering the hobby community more and more and many great projects have already emerged leveraging their far superior dynamics and power capabilities. BLDC motors have numerous advantages over regular DC motors but they have one big disadvantage, the complexity of control. Even though it has become relatively easy to design and manufacture PCBs and create our own hardware solutions for driving BLDC motors the proper low-cost solutions are yet... -
19
NeoPixelBus
An Arduino NeoPixel support library
An Arduino NeoPixel support library supports a large variety of individually addressable LEDs. Please refer to the Wiki for more details. Please use the gitter channel to ask questions as the GitHub Issues feature is used for bug tracking. A library to control one wire protocol RGB and RGBW LEDs like APA106, SK6812, WS2811, WS2812, and WS2813 that are commonly referred to as NeoPixels and two-wire protocol RGB like Lpd8806, APA102, and SK9822 commonly referred to as DotStars. Supports most... -
20
Particle Firmware for the Electron, P1
Device OS (Firmware) for particle devices
The Photon uses an ARM Cortex M3 CPU based microcontroller. All of the code is built around the GNU GCC toolchain offered and maintained by ARM. The build requires version 5.3.1 20160307 or newer of ARM GCC and will print an error message if the version is older than this. In order to turn your source code into binaries, you will need a tool called make. Windows users need to explicitly install make on their machines. Make sure you can use it from the terminal window. The entire Particle... -
21
SpeedFan
SpeedFan is an advanced system monitoring tool
...SpeedFan can access status info from EIDE, SATA and even SCSI drives -
22
SIV (System Information Viewer)
SIV displays useful Windows, network, and hardware info.
...Windows 95, 98 and Me are also supported. SIV can also be used to control AIO devices, such as fans and LEDs. To do this, you need to specify the -AIOCTL command line qualifier. When -AIOCTL is specified, SIV will automatically do the EnhancedPowerManagementEnabled registry change and restart the USB device. SIV (System Information Viewer) uses pcidevs.txt for the PCI devices, usbdevs.txt for the USB devices, and mondevs.txt for monitoring pcmdevs.txt PCMCIA device descriptions. -
23
S.M.A.R.T. Monitoring Tools
Disk Inspection and Monitoring
smartmontools contains utility programs (smartctl, smartd) to control/monitor storage systems using the Self-Monitoring, Analysis and Reporting Technology System (S.M.A.R.T.) built into most modern ATA and SCSI disks. It is derived from smartsuite. -
24
Argus Fan Monitor
Control fan speed and monitor the temperature of system components.
Argus Monitor is a powerful fan-control and system-monitoring tool that gives you complete control over cooling behavior across your entire PC. It allows you to manage CPU, GPU, motherboard, and AIO fans using fixed values or advanced temperature-based control curves sourced from any sensor in your system. With multi-controller support, fan profiles, hysteresis, and temperature averaging, Argus Monitor offers smooth, precise fan adjustments with minimal noise fluctuation. ... -
25
Lenovo Legion Linux Support
Driver and tools for controlling Lenovo Legion laptops in Linux
Lenovo Legion Linux (LLL) brings additional drivers and tools for Lenovo Legion series laptops to Linux. It is the alternative to Lenovo Vantage or Legion Zone (both Windows only). It allows you to control features like the fan curve, power mode, power limits, rapid charging, and more. This has been achieved through reverse engineering and disassembling the ACPI firmware, as well as the firmware and memory of the embedded controller (EC).
