Search Results for "github-copilot"

...It provides most of the functionality of the Windows software provided by Logitech(R), but is much smaller and cross-platform. This software allows you to update or backup configurations, upgrade firmware, or do IR-learning. NOTE: Development has moved to github: http://www.github.com/jaymzh/concordance

Sulin is rolling donkey Gitlab: https://gitlab.com/sulinos Github: https://github.com/sulinos Telegram: https://t.me/sulinos powered by donkey team

...In Addition, libusbK has full support for isochronous endpoints and an extensive set of additional modules to simplify development. Source code repository using github: https://github.com/mcuee/libusbk

...Any Arduino IDE >= 1.0.0 should be fine. EtherCard is available for installation in the Arduino Library Manager. Alternatively, it can be downloaded directly from GitHub.

DEVELOPMENT OF THIS PROJECT HAS MOVED TO GITHUB, at https://github.com/simonjwright/cortex-gnat-rts This project contains various GNAT Ada Run Time Systems (RTSs) targeted at Cortex boards: so far, the Arduino Due (http://www.arduino.org) and the STM32F4-series evaluation boards from STMicroelectronics (http://www.st.com). It is intended that releases will allow the development of proprietary software (by the use of the GCC Runtime Library exception for project-developed code, and by only using manufacturer’s software where the same permission applies).

This project defines a Standard API for access to the CAN (Controller Area Network) bus. The API provides functionality for ISO/OSI Layer-2 (Data Link Layer). The project is now hosted on GitHub: https://github.com/canpie/CANpie

A multi-platform command-line programmer for Atmel (8051, AVR, XMEGA & AVR32) chips with a USB bootloader supporting ISP. This is a mostly Device Firmware Update (DFU) 1.0 compliant user-space application. This project has now migrated to GitHub. You can find the new repository at https://github.com/dfu-programmer/dfu-programmer

Note: The project has moved to https://github.com/pyhys/minimalmodbus The files available here are very old, download from Github instead. MinimalModbus is an easy-to-use Python module for talking to instruments (slaves) from a computer (master) using the Modbus protocol, and is intended to be running on the master. Example code includes drivers for Eurotherm and Omega process controllers. The only dependence is the pySerial module (also pure Python).