Search Results for "daemon"

CP/M Plus on ZX Spectrum +3 has ability to load device drivers from normal disk files (with .fid extension) on boot. A Spectranet device (apart from being networking interface) contains 128kB of extra RAM that can be accessed even with the Spectranet firmware disabled. This project proposes a FID driver that exposes Spectranet's extra memory as a ramdisk to the CP/M Plus system. Changes in v1.1: keep floppy drive motor state (as set by CP/M) when paging in Spectranet RAM (to avoid motor...

CP/M Plus on ZX Spectrum +3 has ability to load device drivers from normal disk files (with .fid extension) on boot. One of the most important devices for any disk operating system is the mass storage drive. Although ZXMMC device is available on the market for years and it works well with +3e firmware, partitions created on MMC cards could not be accessed from CP/M world. At some point it became so frustrating, I decided to write FID driver for it. It's not perfect, but it works surprisingly...

INDI is an instrument neutral distributed interface control protocol that aims to provide backend driver support and automation for a wide range of Astronomical devices (telescopes, focusers, CCDs..etc). Project migrated to Github: https://github.com/indilib/indi

The Project "WDT Driver for LPC1114 on FreeRTOS" was my Project work required for the partial Completion of my Post Graduate Diploma in Embedded System Design at Center for Development of Advanced Computing, Advanced Computing Training School, Pune, India. The Duration of the Project was 15-20 Days wherein we had to develop the driver library for the Watchdog Timer on LPC1114 and incorporate the same into FreeRTOS. The services of the driver are exported using the UNIX like read, write,...

This is a new object-oriented networking stack for the ChipKit UNO32 and MAX32 boards. It currently supports just the ENC28J60 ethernet chip, but could easily be expanded to include other network chips. It offers a full network stack, with TCP and UDP, along with the ability to have multiple ethernet connections. Multiple sockets across multiple protocols are also possible. It has been designed to have a very simple interface to take a lot of the drudgery out of ENC28J60 programming.

Uniform Driver Interface -- Public Source Code for runtime environments and drivers based on the UDI Specifications. Single source image for a driver, built once for each ABI (IA32, Sparc, etc.) and then run on any OS that provides UDI!

TINI-Flash provides Flash file system support, class libaries and utilities for the Dallas Semiconductor TINI embedded Java computer. Currently Flash support is provided as FileSystemDriver class (integrtable into SLUSH) and as command line utilities.

Project purpose: emulating a disk drive which information will be stored in a database through network.

Access Point Utilites for Unix - it's a set of utilites to configure and monitor Wireless Access Points under Unix using SNMP protocol. Utilites knownly compiles and run under Linux, FreeBSD, NetBSD, OpenBSD, MacOS-X, AIX, QNX.

QNX NIC driver for the ATMEL WLAN Chipsets (AT76C502AR, AT76C502AR_D, AT76C502AR_E and AT76C504)

A driver for the Broadcom 440X series of network chipsets for the QNX Neutrino OS.

Lightget is an open hardware and open software project to build computer controlled systems with LEDs and/or other light sources. The ultimate goal is to provide illumination and visual entertainment in a convenient, low-cost solution.