Search Results for "software without code"

Documentation, examples, and reference driver code for the VMware virtual graphics device used by all VMware virtual machines. This project provides the information and code necessary to write both 2D and 3D graphics drivers for this device.

EtherCard is a driver for the Microchip ENC28J60 chip, compatible with Arduino IDE. It is adapted and extended from code written by Guido Socher and Pascal Stang. High-level routines are provided to allow a variety of purposes including simple data transfer through to HTTP handling. Non-AVR boards are NOT currently supported (101/Zero/Due) #211 Hardware: Depending on the size of the buffer for packets, this library uses about 1k of Arduino RAM. Large strings and other global variables can...

DEVELOPMENT OF THIS PROJECT HAS MOVED TO GITHUB, at https://github.com/simonjwright/cortex-gnat-rts This project contains various GNAT Ada Run Time Systems (RTSs) targeted at Cortex boards: so far, the Arduino Due (http://www.arduino.org) and the STM32F4-series evaluation boards from STMicroelectronics (http://www.st.com). It is intended that releases will allow the development of proprietary software (by the use of the GCC Runtime Library exception for project-developed code, and by only using manufacturer’s software where the same permission applies).

HWSensors is a software bundle that includes drivers and applications that allow you to access information from hardware sensors available on your Mac. FakeSMC is an open source SMC device driver/emulator developed by netkas (http://netkas.org/). NOTE: FakeSMC & Plugins starting from v915 provide additional sensors information to HWMonitor then running on Macs.

Since the summer of 2010, the FSAE team High Speed Karlsruhe uses Infineon's XC878 to power its electronics. The XC878 is an 8052 compatible 8-bit µC. Our dedication is to 8-bit real time applications, guaranteed by the powerful peripherals of the XC878. This project aims to publish those portions of our code, which may be of use to a wider audience.

...MinimalModbus is an easy-to-use Python module for talking to instruments (slaves) from a computer (master) using the Modbus protocol, and is intended to be running on the master. Example code includes drivers for Eurotherm and Omega process controllers. The only dependence is the pySerial module (also pure Python). This software supports the ‘Modbus RTU’ and ‘Modbus ASCII’ serial communication versions of the protocol, and is intended for use on Linux, OS X and Windows platforms. It is open source, and has the Apache License, Version 2.0.

This software is the going to be used in a small office refrigerator to controll the thermostat. Currently the code is written for the PIC16F84 in assembler. The code is fully compilable in MPLAB.

The goal of the c6x-tools project is to provide an Open Source development environment for users of the TI TMS320C6x DSP family. This includes (but is not limited to) the following commonly-used devices: 'C6211, 'C6711, 'C6201 and 'C6701.

Tools around the Scenix 48/52 series microcontrollers