Search Results for "c# develop"

Designed for data-logging applications (weather, hydroponics, greenhouses, aquariums, home automation, power consumpion, solar or wind generators etc.), this solution can be useful also in alarms and burglar. Now you can develop MySQL and web enabled Arduino applications only working on Arduino and PHP. To keep ligth the Arduino Sketch, you can port all not realtime logic to PHP side. At the end your application will works on XQ+Arduino UNO even 24/7 with only 20 Watt AC power, and can...

The USB/IP Project aims to develop a general USB device sharing system over IP network. To share USB devices between computers with their full functionality, USB/IP encapsulates USB I/O requests into IP packets and transmits them between computers.

This project introduces new FPGA architectural tools and Linux OS modifications that aid in supporting Dynamic Partial Reconfiguration (DPR) on FPGAs for concurrent control. It shows that control systems benefit from hardware concurrency, meaning that by moving the control intelligence into hardware, the negative effects inherent to threads and their scheduler are minimized. This leaves software with the role of a high-level administrator rather than an executor, thereby eliminating...

The CAN projects aim is to develop and maintain a CAN driver for Linux/windows that support misc. can chips/cards. Also utilities such as tracing tools, diagnostic tools and such will be published in the project. The Very Simple Control Protocol (VSCP)

Alternative attempt to develop linux driver for TI FlashMedia xx12/xx21 storage controllers.

Project to develop a Linux LIRC device driver for the RedRat 3 (until the driver is accepted into the LIRC project). The RedRat3/Rerdat3II is a USB IR receiver/transmitter product (http://www.redrat.co.uk/)

The sx4000 project intends to develop the vendor provided Promise sx4000 driver, to a fully operational open source driver, compatible with the latest linux kernel release.

RT-FireWire aims to develop real-time network platform (on the real-time kernel extension of Linux,currently on Xenomai) on FireWire (a.k.a. IEEE1394). More information about this project can be found in www.rtfirewire.org

This is the community project to maintain and develop the Linux kernel driver for the Attansic L1 gigabit ethernet adapter.

Intent is to develop a kernel module and print driver for the Lexmark X85 All-in-One colour scanner/printer/copier. This kit hopefully will be generic enough to support most/all AIO devices from Lexmark or be easily adapted to do so.

The aim of this project is to develop a modular operating system for the i386 architecture, where each device driver, file system, etc, will be a module that can be loaded and unloaded at run-time from the system.

BDwrap is a template for writing stackable block device drivers on Linux. It's clean interface hides the complexity of device handling, asynchronous calls, buffer cache interaction, etc. It is a great tool to develop stacked block drivers quickly.

The main purpose is to develop a Linux stepper motor driver module to drive two unipolar stepper motors using the parallel port. This driver has the task to enable a home-made robot to move around and uses the tank-principle to move and turn.

The goal of the AC '97 Modem Driver project is to develop an open source Linux device driver to support the modem functionality of the AC '97 Codec

This project was used to develop an OS-independent driver for the CanoScan FB630U flatbed scanner in the form of a backend for the SANE package. Since integration with the SANE project in 2002, there has been no activity here.