Open Source ChromeOS Hardware Drivers

ESPUSB is a software-only USB device stack that adds low-speed USB capability to ESP8266 and ESP8285 microcontrollers. It implements the USB protocol primarily in software instead of relying on dedicated USB hardware. The design needs only a small amount of external circuitry and uses adjacent GPIO pins for the D+ and D- signals. It operates at USB low speed, making it suitable for human-interface devices and control-oriented peripherals. The repository includes an example that emulates a USB keyboard and mouse. A web interface can remotely control those virtual input devices over the ESP8266 network connection. The implementation is highly memory-conscious and includes custom control-message handling, hardware designs, and build tooling for embedded experimentation.

UrJTAG aims to create an enhanced, modern tool for communicating over JTAG with flash chips, CPUs, and many more. It is a descendant of the popular openwince JTAG tools with a lot of additional features and enhancements.

i-Blue 747 / i-Blue 757 / Qstarz BT-Q1000 / i.Trek Z1 / Konet BGL-32 / Holux M-241 / ... control SW (for Java Phones, PalmOS, WinCe (PPC), Java platforms, Windows, Linux, and MacOS). Compatible with most MTK GPS Chipset based loggers.

This software supports programming Logitech(R) Harmony(TM) remote controls. It provides most of the functionality of the Windows software provided by Logitech(R), but is much smaller and cross-platform. This software allows you to update or backup configurations, upgrade firmware, or do IR-learning. NOTE: Development has moved to github: http://www.github.com/jaymzh/concordance

JNode is a Java New Operating system Design Effort. JNode is a simple to use and install Java operating system for personal use on modern devices. Any java application runs on it, fast and safe. See our homepage for additional information.

This is a small library that allows comunicating with a Webasto (tm) W-Bus capable car heating system. Runs on Personal Computers or for embedded devices (slim design). Easily portable. Includes a Heater manager, heater controller program and more. The GIT repository (CVS is deprecated) also includes a control unit application to control W-Bus capable devices, a W-Bus compatible heater unit firmware application and a heater simulator for testing purposes. Also, a serial port loop back driver for linux is included to simulate OBD II K-Line adapters.

libieee1284 is a cross-platform library for parallel port access.

PyUSB provides USB access on the Python language.

Deprecated - please use Keyboarding Master: https://sites.google.com/site/keyboardingmaster/ jnostromo provides drivers for the Razer Nostromo & Belkin N52/N52te designed to be E-Sport legal. Profiles are unique user defined keymappings and can be created for each game. Each profile can have up to 8 unique keymaps with mappings to switch between keymaps. jnostromo includes an easy to use configuration gui to map keys from the nostromo to the keyboard and/or mouse. The configuration gui can be hidden and at any time, the gui can be displayed by clicking on the system tray icon. Its the goal of this project to make jnostromo the driver of choice for E-Sports and competitive gamers! Version 1.5 Tutorial Video http://youtu.be/EkLRJiqoE_o Note, version 1.5.2 has just been released (tarball) which includes an important bug fix. Before, holding down a key repeats the key, now the application only receives a single key when a key is held down.

Open NFC is an open source stack implementing the NFC functionnalities for many OSes. The Open NFC stack offers a comprehensive set of NFC API for Android, Linux and Windows Mobile.

C++ Application to Control a Logitech Harmony Hub. See the Readme in the Files section for more information.

UK-International keyboard layouts is an effort to create and distribute a UK keyboard layout like US-International. The project has layouts for Windows, MacOS X and Linux. Keyboard Layouts were tested successfully under Windows 7 If you need Chromebook version of this keyboard follow this link: https://github.com/leodip/uk-international-keyboard-for-chromebook

URBI: Universal Robotic Body Interface. URBI is a scripted command language used to control robots (AIBO, pioneer,...). It is a robot-independant API based on a client/server architecture. Liburbi C++/Java/Matlab are available here. Forum available at ht

Using the new C# Dll from swig portability of Openobex/ObexFtp to write a nice GUI able to transfer file between two devices with obex protocol. More Info’s here: http://cs-obexftp.wiki.sourceforge.net/

A portable library to control the ICOM PCR-1000 computer controlled general purpose radio receiver and gui front ends for X, Aqua, and windows32

lpcusb is a USB core stack for the built-in USB device of LPC214x microcontrollers. It handles the hardware interface and USB enumeration/configuration. Included are usage examples like USB joystick HID, USB virtual COM port and USB mass storage on SD-ca

C and C++ library for the NIBObee, NIBO burger and NIBO 2 robots. The library contains libraries for AVR Studio and Arduino developement, USB drivers and the RoboDude programming software.

This is a Perl application enabling downloading and configuring the Voltcraft DL-141TH temperature and humidity sensors device. Targeted at Operating Systems supporting libusb. This application exists thanks to reverse engineering.

CanFestival focuses on providing an ANSI-C platform independent CANOpen stack that can be implemented as master or slave nodes on PCs, Real-time IPCs, and Microcontrollers. A WxPython based CanOpen Object Dictionary editor GUI is also provided.

Library and command line program providing access to the EEPROM of an Silabs CP2101 / CP2102 / CP2103. It can programm the USB-Descriptors and the Baudrate table.

xfer9860 works with the fx-9860G (AKA Graph85) versions of Casio's graphing calculators. It allows you to transfer files to your calculator, and works on platforms where libusb is available - including Linux and Windows.

Currently-under-development library of OS-independent objects to provide complex parallel port control, high-resolution timers and other similar facilities needed when using PC I/O ports to control external digital electronics.

Linux Driver and control program for the Antec H20 - 920 Series liquid coolers.

A solution for Home automation, with HTTP access to manage Tini Board, X10 - I2C - LCD components. You can add your own manager and exchange his services with other. All manager are plug on a kernel (Servlet Java).

Driver support for 3D Controller Hardware. We hope to support SDL Input, DirectInput, and other major controller API's including game consoles and embedded systems.