Search Results for "read"

...Basically you can use these inexpensive little sensors and other chips with very simple wiring to sense and control the physical environment. The interface is very flexible -- everything from a web browser, to read and writing directly to the chip's "file" to integrating with your programs -- even over the internet. There is a growing number of 1-wire sensors: temperature, voltage, humidity, light, ultraviolet, pressure, thermisters, thermocouples, programmable microcontrollers, relays, lights, LCD panels, etc

Accessing memory cards (the plastic ID cards, not the Flash cards) requires vendor-specific APIs and libraries. This module handles the differences in a configurable way and allows applications to read and write memory cards through a single, simple interface.

...Objective is to separate the user application from the tedious management of the device (eg. constant polling to prevent their reset function, USB interaction requirements). A /dev device is created per chain through which applications can read/write status and commands. A command-line tool is included to assist with testing and to illustrate the /dev interface. Built with information from various sample coding done by others over the years, who are referenced in the code comments - many thanks to those that have gone before me.

Linux user-space implementation of Aladdin's eToken R2 device driver

...The Duration of the Project was 15-20 Days wherein we had to develop the driver library for the Watchdog Timer on LPC1114 and incorporate the same into FreeRTOS. The services of the driver are exported using the UNIX like read, write, Open and ioctl system calls used by the various tasks in the FreeRTOS environment to register with the Watchdog service. The Watchdog service itself is a task running as an idle task hook and services the watchdog on behalf of all the tasks that are registered with our driver. The driver would reset the system if any of the registered tasks do not perform as they should. ...

A Linux driver for RTD DM5408 / DM408 ISA acquisition card. A DKMS module and a dynamic library written from scratch but trying to keep same functions structure of its official Windows 98 driver. I don't recommend it for production. I'm just trying to learn writing drivers for Linux with some interest in Electronics Interfacing.

mmapper allows to access every resource attached to the machine. It can read and write any physical address on the memory bus, any I/O port and any field of the PCI space configuration of any peripheral.

The libtlc54x helps you to communicate with the Texas Instruments TLC548/549 A/D-Converter via serial or parallel port. With the library you need only three steps to open the device, read the data and close the device.

pci-utility is utility developed to access PCI Device configuration Space. It enables user to read and write registers on PCI Configuration space of PCI Devices.

This software allows you to read HP4145 Semiconductor Parameter Analyzer files on a Linux PC.