Search Results for "modules"

The Linux GPIB Package is a support package for GPIB (IEEE 488.2) hardware. The package contains a development environment consisting of a GPIB library written in C, kernel driver modules, and bindings for several other languages.

...All WinUSB power/pipe polices are fully supported by the libusbK driver. In Addition, libusbK has full support for isochronous endpoints and an extensive set of additional modules to simplify development. Source code repository using github: https://github.com/mcuee/libusbk

Industry Pack support for Linux kernel. Project to host carrier and IP modules device drivers for Linux kernel.

KEDR is an extensible system for dynamic (runtime) analysis and verification of Linux kernel modules. KEDR tools operate on the modules chosen by the user and can perform function call monitoring, fault simulation and much more.

This project introduces new FPGA architectural tools and Linux OS modifications that aid in supporting Dynamic Partial Reconfiguration (DPR) on FPGAs for concurrent control. It shows that control systems benefit from hardware concurrency, meaning that by moving the control intelligence into hardware, the negative effects inherent to threads and their scheduler are minimized. This leaves software with the role of a high-level administrator rather than an executor, thereby eliminating...

This project is built to support extra functions to CLEVO laptops for Linux. May including several utilities and kernel driver modules.

The PortKnocko project is composed of two parts: an iptables module (user space) and a netfilter module (kernel space). Both modules are used to implement the Port Knocking and SPA (Simple Packet Authentication).

Software related to Ericsson mobile broadband modules (f3507g, f3607gw, f3307, c3607 and f5521gw).

Provides access to Belkin Nostromo n50/n52 speedpads as more than simple USB keyboard devices via configuration GUI. Also includes a basic userland linux event interface and both OpenGL and OpenAL modules for video and audio.

Library for handling XBee / XBee-PRO RF modules. The library is written in C and supports the following platforms: Linux (x86, MIPSel), Windows (x86), AT91 SAM7 microcontrollers.

The UNH-iSCSI project consists of software implementations of Initiator and Target loadable modules for the IETF Networking (SAN) protocol iSCSI [RFC3720] with support for iSER [RFC5046].

Ddr-Z8E is a device driver library for the Zilog Z8 Encore!(r) microcontroller. The library supports I/O, IRQ, RS-232, I2C, SPI, A/D, WDT, ticker and built in flash memory as well as utility modules, e.g. for debugging and binary number representation.

This Project was born on friday, 13th of February. The target of this project is to edit the existing Wireless LAN Realtek RTL8180L-Wlan-Modules, wich works only with RedHat Linux 8 and 9, so that you can use them on all distributions and kernel versions

This project is here to help users change the status of their wireless cards radio on laptops which do not have a hardware based wireless radio switch. We have a laptop support table, and linux modules for some Averatec and Packard-Bell hardware.

OpenMAC is a TinyOS-based implementation of IEEE 802.15.4 MAC layer, which lies at the core of MeshNetics ZigBee stack, and provides basic wireless networking (star,peer to peer) to WSN's. Available for low-power ZigBit modules and Atmel AVR Z-Link Kits

The openwince project collects free (open source) software tools, modules, applications, drivers, and so on for Windows CE platform developers. Some of the modules are usable outside Windows CE development environment and are platform independent.

Unix kernel module for MR97310 or MR97310A USB chip used in digital cameras by Aiptek, Mars, Emprex ... Attempting to use existing modules with slight modification failed, so development stopped. If you are willing to take over this project, please email

Our target is to make modules for blood glucose meters and to make them usable for other projects which are creating Diabetes related software.

MEA is an abstraction layer and API between vendor-specific measurement and instrumentation drivers and test applications that use them. All hardware-specific tasks are done by dynamically linked adapter modules.

LM-Sensors Monitor is a monitor for gkrellm. It monitor your sensors using the lm-sensors' modules. You can monitor all your sensors and for temperature monitor you can choose °F or °C

This driver should provide a Linux Kernel interface to the ActiveWire USB Modules (see http://www.ActiveWireInc.com).

openjtools project collects free (open source) Jtag/Ejtag software tools, modules, applications, drivers, for use with different hardware platforms.