Search Results for "bus"

Drivers for the HP (previously Compaq) Smart Array controllers which provide hardware RAID capability. Hardware info: https://www.hpe.com/us/en/product-catalog/servers/smart-array-controllers-and-smart-host-bus-adapters.hits-12.html

This is a small library that allows comunicating with a Webasto (tm) W-Bus capable car heating system. Runs on Personal Computers or for embedded devices (slim design). Easily portable. Includes a Heater manager, heater controller program and more. The GIT repository (CVS is deprecated) also includes a control unit application to control W-Bus capable devices, a W-Bus compatible heater unit firmware application and a heater simulator for testing purposes. ...

Please note that OWFS source code, and all Issue/Tickets/merge requests have now been moved to https://github.com/owfs/owfs/. Developer mailing lists will still be kept at Sourceforge. ---- OWFS -- 1-Wire file system. Use the Dallas 1-Wire and iButton chips with standard filesystem commands. Create temperature loggers. Monitor everything. OWHTTPD -- same system, only used as a light weight web server. OWFS is also ported to embedded routers, Mac OSX and Windows. Basically you can use...

can4linux is hosted on https://gitlab.com/hjoertel/can4linux since 2016. Don't use SourceForge anymore for this code. can4linux is an universal Linux device driver for ISA or PCI interface boards with CAN interface and embedded CAN controller solutions. Based on the API provided by can4linux commercial protocol stacks for CANopen, J1939 and DeviceNet are available. A first PCI board with an FPGA based CAN FD controller is supported (TARGET=IXXAT_IB500) in the CAN FD ISO mode but also non-ISO

This project defines a Standard API for access to the CAN (Controller Area Network) bus. The API provides functionality for ISO/OSI Layer-2 (Data Link Layer). The project is now hosted on GitHub: https://github.com/canpie/CANpie

Since the summer of 2010, the FSAE team High Speed Karlsruhe uses Infineon's XC878 to power its electronics. The XC878 is an 8052 compatible 8-bit µC. Our dedication is to 8-bit real time applications, guaranteed by the powerful peripherals of the XC878. This project aims to publish those portions of our code, which may be of use to a wider audience.

This (Python) tool allows you to easily create FPGA bitfiles for your embedded system, from several Open Source IPs (compatibles with the OpenCores Wishbone bus) . It will also generates the corresponding drivers (currently only Linux ones).

...This IDE supports Linux kernel configuration, compilation & emulation, system call development and device driver development. LinK+ IDE includes various templates in the category of character, block and network device driver subsystems for device driver development. It includes various bus infrastructure templates and also provides Linux device driver code completion, code assistance & code navigation for developers. Download - LinK+ IDE for 32 & 64-bit architecture : https://sourceforge.net/projects/linkplustest/files/installers/ LinK+ Update Site (compatible with Eclipse IDE v3.6.x ): http://sourceforge.net/projects/linkplustest/files/repository/ User Manual: http://sourceforge.net/projects/linkplustest/files/documentation/LinK%2B_UserManual_Rev4.pdf

Open Source Linux driver for wireless network cards (DWL-[G]520+ PCI, DWL-[G]650+ CardBus, GL-2422MP mini-PCI, DWL-120+ USB etc.) which use the entirely undocumented Texas Instruments (TI) ACX100/ACX111 chips, for 2.4.x , 2.6.x to 3.x kernels. FreeBSD: see some other website (FIXME URL got clipped). !! BIG FAT NOTE: development (i.e., driver "releases") is happening in git source repository tree (as of 2011-09-04), thus you're expected to look there (see web site menu Code --> Git) !!

This project introduces new FPGA architectural tools and Linux OS modifications that aid in supporting Dynamic Partial Reconfiguration (DPR) on FPGAs for concurrent control. It shows that control systems benefit from hardware concurrency, meaning that by moving the control intelligence into hardware, the negative effects inherent to threads and their scheduler are minimized. This leaves software with the role of a high-level administrator rather than an executor, thereby eliminating...

The CAN projects aim is to develop and maintain a CAN driver for Linux/windows that support misc. can chips/cards. Also utilities such as tracing tools, diagnostic tools and such will be published in the project. The Very Simple Control Protocol (VSCP)

Agnix is a small operating system kernel for i386, supporting 32-bit protected memory mode, paging, hardware switched tasks, memory tests, PCI bus, devices, PCI IRQ routing, RT timers and network protocols.

Development of Linux drivers for Xilinx MailBox IP. MailBox IP is a bi-directionnal FIFO plugged between two buses, allowing sending messages from one bus to the other, in both directions.

This device driver implements KMDF based virtual bus driver and generic virtual disk hosted on it. Users can add virtual disks to Windows OS which are then seen and managed by OS as generic, regular disks. Virtual disks are plug in/out with cmdln utility

The SCSI Bus Analyzer Solution (scsitrace) is a Linux device driver that can be enabled on-the-fly to capture protocol traces trafficking across SCSI-based storage devices.

Set of various C-routines for Atmel AVR MCUs, packed in several libraries, with fancy Makefile system for easy integration with user projects. Contains functions for UART, SPI, HD44780 or T6963C LCD\'s, Dallas 1-Wire bus, AVR bootloader and more.

Multiplatform and Multiprotocol driver for QLogic Host Bus Adapters. Runs on Solaris, NetBSD, FreeBSD and Linux. Support both initiator and target mode. Supports QLogic 1020 SCSI through Qlogic 25XX FC cards.

mmapper allows to access every resource attached to the machine. It can read and write any physical address on the memory bus, any I/O port and any field of the PCI space configuration of any peripheral.

An high speed Linux device driver for the digital parallel I/O board DIO32HS produced by National Instrument. Currently we tested only computer input, were we get more than 5.5Mbytes/sec on a 32 bit wide bus.

Linux kernel level driver to allow access to the I/O of the Beckhoff CX-1100 power supply used with the Beckhoff CX-1000 embedded PC. This allows access to the K-Bus and IP-Bus of the Beckhoff system.

A linux (2.6-) kernel driver to connect garmin gps receivers via the usb bus

The Host Bus Adapter API (Applications Programming Interface) is a C-level project to manage Fibre Channel Host Bus Adapters.

Linux kernel driver to connect INELT UPS devices via the USB bus.

Linux drivers to allow ALSA audio applications to communicate over the IEEE1394/Firewire bus. This allows audio and midi data to be shared between multiple workstations and audio devices on a 1394 network, using the IEC 61883-6 protocol

This project is aimed to porting ppbus (the parallel port abstract bus found in FreeBSD) to the NetBSD Operating System. This will allow using faster devices with NetBSD and will add IEEE 1284 support.