Search Results for "simple http server"

EtherCard is a driver for the Microchip ENC28J60 chip, compatible with Arduino IDE. It is adapted and extended from code written by Guido Socher and Pascal Stang. High-level routines are provided to allow a variety of purposes including simple data transfer through to HTTP handling. Non-AVR boards are NOT currently supported (101/Zero/Due) #211 Hardware: Depending on the size of the buffer for packets, this library uses about 1k of Arduino RAM. Large strings and other global variables can easily push the limits of smaller microcontrollers. This library uses the SPI interface of the microcontroller and will require at least one dedicated pin for CS, plus the SO, SI, and SCK pins of the SPI interface. ...

INDI is an instrument neutral distributed interface control protocol that aims to provide backend driver support and automation for a wide range of Astronomical devices (telescopes, focusers, CCDs..etc). Project migrated to Github: https://github.com/indilib/indi

This is a new object-oriented networking stack for the ChipKit UNO32 and MAX32 boards. It currently supports just the ENC28J60 ethernet chip, but could easily be expanded to include other network chips. It offers a full network stack, with TCP and UDP, along with the ability to have multiple ethernet connections. Multiple sockets across multiple protocols are also possible. It has been designed to have a very simple interface to take a lot of the drudgery out of ENC28J60 programming.

** Support for this project is suspended indefinately, the Phidget website now publishes a Linux API, please check it out, http://www.phidgets.com ** The project consist of two parts, the first is a simple C library simplifying access to phidget devices