Search Results for "assembly"

GXSM -- Gnome X Scanning Microscopy: A multi-channel image and vector-probe data acquisition and visualization system designed for SPM techniques (STM,AFM..), but also SPA-LEED/LEED/LEEM data analysis. A plug-in interface allows any user add-on data-processing and special hardware and instrument support. Latest: NC-AFM and related explorative methods as SQDM can be configured. High-Speed external PAC-PLL hardware option with digital DSP link. Based on several hardware options it supports...

JNode is a Java New Operating system Design Effort. JNode is a simple to use and install Java operating system for personal use on modern devices. Any java application runs on it, fast and safe. See our homepage for additional information.

FileSystem is an OPENSOURCE program for advanced disk management with built-in drivers for PATA IDE Hard Disks and DVD/CDROM Drives, USB Mass Storage Drivers. Implemented file systems : FAT32 / ISO9660 / EXT2. It can be compiled for DOS, LINUX, WIN32

EasyFlash is a flash memory cartridge for the Commodore 64 with multiple configurations and banks possible. Since it does not use traditional UV-EPROMs but Flash memory, it is possible to "burn" the cartridge using your C64. No EPROM programmer is needed.

OpenVGA is an free and open FPGA-based implementation of a VGA compatible graphics adapter, and utilising low-cost hardware. The project includes the PCB schematic and artwork, Verilog HDL, firmware assembly code, and driver source code.

The objectives of OCERA is the design and implementation of a library of free software components for the design of embedded real-time systems. These components will be used to create flexible, configurable, robust and portable embedded applications.

This Project was born on friday, 13th of February. The target of this project is to edit the existing Wireless LAN Realtek RTL8180L-Wlan-Modules, wich works only with RedHat Linux 8 and 9, so that you can use them on all distributions and kernel versions

Minirighi is a multi-threading open-source operating system written for didactic purpose. It has been written from scratch and it is compatible with POSIX.

This is the development site for frame buffer video drivers and video subsystem for Linux.

X2S_USB, Fpga, XILINX, Spartan2, XC2S200, Linux, driver, API, C, C++, assembly, Prototyping board, Development board

The aim of this project is to develop a modular operating system for the i386 architecture, where each device driver, file system, etc, will be a module that can be loaded and unloaded at run-time from the system.

Linux port to the Realtek RTL8181 wireless gateway SoC.

Tools and patches to run Linux on the IBM NetworkStation 1000 series of thin clients.

Software for a van eck phreaking device. Please use to test security only. <a href="http://searchsecurity.techtarget.com/sDefinition/0,,sid14_gci550525,00.html">Here</a>'s an explanation if you don't know what van eck phreaking is.

avOS Aims to be a replacement for the archos AV300 O/S firmware. This will either be achieved by porting linux to the Archos, writing a custom O/S from scratch, or writing a custom JVM from scratch. The Archos AV300 uses a TMS320DSC25 ARM7 based DSP.

Linux/i386 kernel driver and development library to control serial CBM devices, such as the Commodore 1541 disk drive, connected to the PC's parallel port via a XM1541 or XA1541 cable. A fast disk copier included.

SimOS is an OS that will be based on the OSKIT function library. In addition we will be maintaining the oskit as a seperate release, updated as the core of the kernel. This OS will be easy to use, with numerous software versions on it.

"DSO" is a Digital Signal Oscilloscope. My DSO will be connected via the USB to the PC. All software to operate the DSO is developed within this project.

Dreamos is an operating system developed on Sega Dreamcast to be ported to an array of embedded devices. The goal of the project is to be able to run non-ported Unix programs on the Sega Dreamcast and other embedded devices with ease and POSIX compliance

Embedded PowerPC Bootloader Project, especially for Embedded PowerPC boards. The code for this project is frozen. Development continues with the "U-Boot" project (Universal Boot Loader, see http://sourceforge.net/projects/u-boot ).

Tools around the Scenix 48/52 series microcontrollers

Lightget is an open hardware and open software project to build computer controlled systems with LEDs and/or other light sources. The ultimate goal is to provide illumination and visual entertainment in a convenient, low-cost solution.

control unipolar stepper motors connected to a parallelport.