Search Results for "linux scan driver"

Please NOTE: The repository at SourceForge is retired! For the latest source, releases, bug tracking, use https://github.com/OpenCBM/OpenCBM instead! Win NT/2K/XP/7/8/10/11, Linux/i386/AMD64/ARM, FreeBSD and MacOS X kernel driver and development library to control serial CBM devices, such as the Commodore 1541 disk drive, connected to the PC's parallel port via a XM1541 or XA1541 cable. Fast disk copier included. Successor of cbm4linux. Also supports the XU1541 and the XUM1541 USB devices (a.k.a. "ZoomFloppy").

This project is aimed to produce modified MK88 BIOS with new features: 1. Improved keyboard driver 2. Support for cp866 encoding 3. Support for DS/DD drives 4. Support for ROM extension cards

Since the summer of 2010, the FSAE team High Speed Karlsruhe uses Infineon's XC878 to power its electronics. The XC878 is an 8052 compatible 8-bit µC. Our dedication is to 8-bit real time applications, guaranteed by the powerful peripherals of the XC878. This project aims to publish those portions of our code, which may be of use to a wider audience.

FileSystem is an OPENSOURCE program for advanced disk management with built-in drivers for PATA IDE Hard Disks and DVD/CDROM Drives, USB Mass Storage Drivers. Implemented file systems : FAT32 / ISO9660 / EXT2. It can be compiled for DOS, LINUX, WIN32

OpenVGA is an free and open FPGA-based implementation of a VGA compatible graphics adapter, and utilising low-cost hardware. The project includes the PCB schematic and artwork, Verilog HDL, firmware assembly code, and driver source code.

This Project was born on friday, 13th of February. The target of this project is to edit the existing Wireless LAN Realtek RTL8180L-Wlan-Modules, wich works only with RedHat Linux 8 and 9, so that you can use them on all distributions and kernel versions

The sx4000 project intends to develop the vendor provided Promise sx4000 driver, to a fully operational open source driver, compatible with the latest linux kernel release.

X2S_USB, Fpga, XILINX, Spartan2, XC2S200, Linux, driver, API, C, C++, assembly, Prototyping board, Development board

The aim of this project is to develop a modular operating system for the i386 architecture, where each device driver, file system, etc, will be a module that can be loaded and unloaded at run-time from the system.

mDriver is a utility to migrate binary device driver from Windows to Linux. It takes out the binary instruction and data from Windows driver (*.sys files), and then combine them with some supporting code to build a corresponding Linux driver module.

Linux/i386 kernel driver and development library to control serial CBM devices, such as the Commodore 1541 disk drive, connected to the PC's parallel port via a XM1541 or XA1541 cable. A fast disk copier included.