Search Results for "so"

TTF-GDOS is a GDOS replacement that uses true type fonts as well as gem fonts. It is small, fast & efficient and can easily be used without a hard drive. It also incorporates features roughly equivalent to font-GDOS: - a caching system so you can use more fonts for a given amount of memory, - built in bezier functions This release includes ttf2gem, a utility program that creates accurate gem fonts from a true type font (new for 2.3) Using true type fonts gives you 3 big benefits: - you can choose from a vast range of true type fonts - true type fonts are scalable so you can have almost any size font you want - true type fonts need much less disk storage than typical gem printer fonts, so even on a low spec machine you can use lots of fonts. ...

Allows a SwiftLink compatible bus-ACIA to be accessed through standard C64 kernal calls. The download includes binary at 49152, and source in two formats so you can relocate it.

...Although ZXMMC device is available on the market for years and it works well with +3e firmware, partitions created on MMC cards could not be accessed from CP/M world. At some point it became so frustrating, I decided to write FID driver for it. It's not perfect, but it works surprisingly well. For list of limitations, build instructions and more details see the source code file.

...Large strings and other global variables can easily push the limits of smaller microcontrollers. This library uses the SPI interface of the microcontroller and will require at least one dedicated pin for CS, plus the SO, SI, and SCK pins of the SPI interface. An interrupt pin is not required. Any Arduino IDE >= 1.0.0 should be fine. EtherCard is available for installation in the Arduino Library Manager. Alternatively, it can be downloaded directly from GitHub.

DEVELOPMENT OF THIS PROJECT HAS MOVED TO GITHUB, at https://github.com/simonjwright/cortex-gnat-rts This project contains various GNAT Ada Run Time Systems (RTSs) targeted at Cortex boards: so far, the Arduino Due (http://www.arduino.org) and the STM32F4-series evaluation boards from STMicroelectronics (http://www.st.com). It is intended that releases will allow the development of proprietary software (by the use of the GCC Runtime Library exception for project-developed code, and by only using manufacturer’s software where the same permission applies).

Free Windows keyboard driver that extends AltGr to provide comprehensive accented character support (including multi-accented characters), international punctuation, IPA, medieval characters, mathematical and non-mathematical symbols, and more. Designed for UK keyboards and installs as a regular keyboard layout option. I might adapt it for US keyboards if there's enough interest. The driver should be stable (built using MSKLC, which is mature) but classified as beta because it has not...

...This allows the user to interface directly with comedi-lib though the comfortable interface of a Python interpreter.Object-Orientation of the interface is deliberately not provided so the coding style will loosely mimic C -- in this way, Schlang can be used to prototype and debug complex programs that will later be written in C.

...A virtual network mainly refers to the topology created by GNS3 (Graphical Network Simulator, a popular network simulator), the physical network means the real machines or virtual machines (created by VMware, virtualbox and so on) which are running Windows.

This program works as an interface between a USB B2k Telbox and skype. The software used X11 messageing to communicate with skype so works with current linux distribution's and with the latest version of skype.

Use your favorite keyboard layout everywhere! I learned the Colemak keyboard layout, but I can not install at school, so I wrote a portable keyboard layout program in autohotkey. It no requires install or administrator privileges.

Since i have upgraded my S.O. to windows Seven, my control pad no longer works( it's a PSX control adapted to work in pc, by paralel port ) , so i've decided to build my own drivers for this S.O.

rl-module is a linux kernel module that drives the USB missile launcher made by Dream Cheeky. With this module you can move it in all the six directions. It handles correctly interrupts so it stops motors when it reaches the mechanical contraints.

This Project was born on friday, 13th of February. The target of this project is to edit the existing Wireless LAN Realtek RTL8180L-Wlan-Modules, wich works only with RedHat Linux 8 and 9, so that you can use them on all distributions and kernel versions

The Samsung ML-1210 printer works perfect under Win32, under linux (not so good), but not under Win64. This tool is not a complete driver, even presently not a 64-bit, but it allows to print graphic files. It uses code from ghostscript 5.10 for linux.

Intent is to develop a kernel module and print driver for the Lexmark X85 All-in-One colour scanner/printer/copier. This kit hopefully will be generic enough to support most/all AIO devices from Lexmark or be easily adapted to do so.

The openwince project collects free (open source) software tools, modules, applications, drivers, and so on for Windows CE platform developers. Some of the modules are usable outside Windows CE development environment and are platform independent.

Help port the tulip driver from free/net/openbsd to Darwin OS. So far the driver is written to the ADMtek 985 clone chipset and the PNIC 82c169 chipset. Due to IOKit's object-oriented design, the code can be easily subclassed to support new chipsets.

This is the Solaris USB camera drivers project and it will first target on the OV511 cameras based on the Linux ov511 driver. NEW: USB Video Class on Solaris. See the project forum for updates!

Unix kernel module for MR97310 or MR97310A USB chip used in digital cameras by Aiptek, Mars, Emprex ... Attempting to use existing modules with slight modification failed, so development stopped. If you are willing to take over this project, please email

This project was a kernel-module to support webcams based on the NW802 chipset. Jean-François Moine added support for those in the mainline kernel some time ago, so you should just update your kernel, this project is purely for historical purposes.

As Guillemot inc. doesn't plan to release Linux drivers for the ISIS card, the linux communtity will have to. So some reverse engineering is needed. The goal is to create an ALSA driver for the maxisound ISIS,

Moved my work over to GitHub, so please find me there. https://github.com/rahlskog/VM167 Linux drivers for various Velleman hardware devices.

QCPUfreq is a GUI program providing a frontend for the Linux kernels CPUfreq functionality similar to the GNOME cpufreq-applet. It is multi CPU capable. It follows the philosophy "One task, one tool", so it is NOT a deamon or such things.