Search Results for "ethrtnet/ip"

Industry Pack support for Linux kernel. Project to host carrier and IP modules device drivers for Linux kernel.

CUPS back-end for the canon printers using the proprietary USB over IP BJNP protocol. This back-end allows Cups to print over the network to a Canon printer. The design is based on reverse engineering of the protocol. Version 2.0 adds ink-level reporting and improved out-of-paper detection. Version 2.0.1 is now released under GPLv2 or later to be compatible with the changed cups license. No other changes.

can4linux is hosted on https://gitlab.com/hjoertel/can4linux since 2016. Don't use SourceForge anymore for this code. can4linux is an universal Linux device driver for ISA or PCI interface boards with CAN interface and embedded CAN controller solutions. Based on the API provided by can4linux commercial protocol stacks for CANopen, J1939 and DeviceNet are available. A first PCI board with an FPGA based CAN FD controller is supported (TARGET=IXXAT_IB500) in the CAN FD ISO mode but also non-ISO

...At the end your application will works on XQ+Arduino UNO even 24/7 with only 20 Watt AC power, and can be controlled by smartphone via WiFi or from Internet using some free dynamic IP. What more? Enjoy. Sources in github https://github.com/msillano/USBphpTunnel Preconditions: MXQ + Palapa Web server, Arduino UNO Install: - Download USBphpTunnel11_d.apk and the full test_files dir - See file /test_files/readme.txt

The USB/IP Project aims to develop a general USB device sharing system over IP network. To share USB devices between computers with their full functionality, USB/IP encapsulates USB I/O requests into IP packets and transmits them between computers.

Development of Linux drivers for Xilinx MailBox IP. MailBox IP is a bi-directionnal FIFO plugged between two buses, allowing sending messages from one bus to the other, in both directions.

Library for handling XBee / XBee-PRO RF modules. The library is written in C and supports the following platforms: Linux (x86, MIPSel), Windows (x86), AT91 SAM7 microcontrollers.

A simple user level UDP/IP/Ethernet environment used to test and demonstrate the capabilities of the Linux VFIO driver. Includes drivers for 3 different Ethernet devices.

Linux kernel level driver to allow access to the I/O of the Beckhoff CX-1100 power supply used with the Beckhoff CX-1000 embedded PC. This allows access to the K-Bus and IP-Bus of the Beckhoff system.

A low cost software and hardware KVM over IP and remote Console monitoring solution running on Linux. Secure administration and access to remote keyboard/video/mouse and serial console output. Easily configured and customised to suit user needs.

Drivers and daemon for using iSCSI (SCSI over IP) on Linux. For Linux kernels 2.6.11 and above, use open-iscsi.org. For the 2.6.9 and 2.4 kernels, use the RHEL4 and RHEL3 CDs respectively. The 4.0.2 version here will work on the 2.6.10 kernel only.