Search Results for "remote"

Neat alternative for JTAlert. Available for both Apple and Windows (10+). Make sure to automatically call any Wanted callsigns specified. Can also be used to monitor band opening. Can handle callsign exclusions. Can even handle wanted callsigns according to your worked before Rules.

Arduino Mega 2560 Code to that supports a standard Ethernet Shield . i.e. Drive Relays hence outputs to MFJ-993b. Supports Up and Down for manual L and C Tuning, Autotune On/Off, Antenna Selection 1/2 and 100ms Short /1000ms Long for Tune. Op Note 1: You may need additional power for the 5V relay board; sometimes you can power the 5V relay board from the Mega 2560 - but reset/start the device first and then connect power to the relay board. Op Note 2: You will need determine...

************************************* UPDATE ******************************* This project has been divided in two parts: - GUI for cw through cwdaemon, with improved specs / customization [CWdaemonGUI] - GUI rig control [Microrig GUI] The packages are ready as .zip folders in the File section. Enjoy :-) ****************************************************************************** "Remote HF Operation" it's now a reality! With this app it's possible to send CW, with CWdaemon, over net ( local / internet ). Easy setup of: - cw macro [ labels / messages ] - cw WPM speed, accessible also via GUI, with a 10 / 40 WPM speed range - network settings. Moreover it's capable of control an HF rig ( via Hamlib network control ); in my testbed I'm using an uSDX transceiver, 5W, all mode, full SDR. ...

...When used with Fldigi and a multiband antenna, this tool largely automates the task of testing up to five HF frequencies between two sites. Briefly, one site is configured as a remote site and the other as net control. The remote site transmits a brief text message on each of the five designated frequencies, starting at a prearranged time. The designated net control station (NCS) listens to each band in the same sequence, starting at the same designated time. In the second half of the ten minute cycle, the remote site becomes the listener and the NCS transmits a text message on the band where the remote site's signal was strongest. ...

Remote industrial terminal indicator to the control of Modbus-RTU on Atmega128. Publication of "MODBUS on a leash. Remote industrial indicator. - Radiolybitel, Minsk, 2009, № 7, p.46" (series of articles http://radioliga.com). Project for IAR.

Rigserve implements a human-readable control language for remote or local IP access to amateur radio equipment (rigs). A Python class library allows interfacing with a large number of rig types via serial ports or other methods.

With UnidenCommander (UC) you can remote control Uniden Bearcat radio scanners through a RS-232 connection. UC currently supports the Uniden UBC785XLT scanner, and support for the UBC780XLT is in an experimental state.

Simple Lossless Ad-hoc Protocol (SLAP) is designed to be used for wireless digital data transfer on embedded systems. The program is built for uClinux, a derivative of Linux designed for embedded microcontrollers, but can be easily ported.

Java libraries implementing RCIP Remote Control Interface Protocol and PCIF CCDump Monitoring for the GRE PSR-500, PSR-600 and Radio Shack PRO-106, PRO-197 Advanced Digital Trunking Scanners.