Search Results for "remote"
Sort By:
Showing 18 open source projects for "remote"
View related business solutions-
Go From AI Idea to AI App FastAccess Gemini 3 and 200+ models. Build chatbots, agents, or custom models with built-in monitoring and scaling.
-
Forever Free Full-Stack Observability | Grafana CloudBuilt on open standards like Prometheus and OpenTelemetry, Grafana Cloud includes Kubernetes Monitoring, Application Observability, Incident Response, plus the AI-powered Grafana Assistant. Get started with our generous free tier today.
-
1
Wait and Pounce FT8
Wait to decode callsigns, then call them using UDP protocol
Neat alternative for JTAlert. Available for both Apple and Windows (10+). Make sure to automatically call any Wanted callsigns specified. Can also be used to monitor band opening. Can handle callsign exclusions. Can even handle wanted callsigns according to your worked before Rules. -
2
Skywave Linux
Global Software Defined Radio at Your Fingertips
...Skywave Linux is an X86, 64 bit live environment configured for accessing internet accessible software defined radio receivers. With this operating system, you may tune in popular stations or amateur radio, aeronautical, maritime, or other signals received at remote internet servers around the world. For a live map of the best KiwiSDR and WebSDR servers and a nice "click to tune" interface, Use the installed SDR-Map utility to find radio servers and listen from interesting places. Also, I have set up a self-updating SDR Map at https://rx.skywavelinux.com. An internet radio streamer application is also included for popular studio streams. ... -
3
Linpac
Amateur Radio AX.25 chat and PBBS program using Linux's AX.25 stack
A modular console-oriented amateur radio AX.25 keyboard to keyboard chat and PBBS program using Linux's AX.25 stack. Includes support for multiple concurrent connected sessions, a unconnected (UI) message screen, and an automated packet message client -
4
MFJ-993b Web Remote
Arduino Mega 2560 + Ethernet Shield to Drive 8 Relays for MFJ-993b
Arduino Mega 2560 Code to that supports a standard Ethernet Shield . i.e. Drive Relays hence outputs to MFJ-993b. Supports Up and Down for manual L and C Tuning, Autotune On/Off, Antenna Selection 1/2 and 100ms Short /1000ms Long for Tune. Op Note 1: You may need additional power for the 5V relay board; sometimes you can power the 5V relay board from the Mega 2560 - but reset/start the device first and then connect power to the relay board. Op Note 2: You will need determine... -
$300 in Free Credit Towards Top Cloud ServicesStart your project in minutes. After credits run out, 20+ products include free monthly usage. Only pay when you're ready to scale.
-
5
remoteGUI
µSDX & CWdaemon GUI
************************************* UPDATE ******************************* This project has been divided in two parts: - GUI for cw through cwdaemon, with improved specs / customization [CWdaemonGUI] - GUI rig control [Microrig GUI] The packages are ready as .zip folders in the File section. Enjoy :-) ****************************************************************************** "Remote HF Operation" it's now a reality! With this app it's possible to send CW, with CWdaemon, over net ( local / internet ). Easy setup of: - cw macro [ labels / messages ] - cw WPM speed, accessible also via GUI, with a 10 / 40 WPM speed range - network settings. Moreover it's capable of control an HF rig ( via Hamlib network control ); in my testbed I'm using an uSDX transceiver, 5W, all mode, full SDR. ... -
6
Ardu-RF switch
RF relays serial switch
Simple relays driver via USB serial connection. Easy to customize / expand to fulfill any need. Actually developed to switch RF relays in my SatNOGS remote node, to permit to use different antennas on different bands. !! UPDATE !! - vers 2: code cleanup and modified with the possibility of enable / disable banner and echo report back via serial ( better explanation into README ) -
7
HF-Sounder Version 1.4 (Beta)
Finds best HF band for site-to-site communications using Fldigi
...When used with Fldigi and a multiband antenna, this tool largely automates the task of testing up to five HF frequencies between two sites. Briefly, one site is configured as a remote site and the other as net control. The remote site transmits a brief text message on each of the five designated frequencies, starting at a prearranged time. The designated net control station (NCS) listens to each band in the same sequence, starting at the same designated time. In the second half of the ten minute cycle, the remote site becomes the listener and the NCS transmits a text message on the band where the remote site's signal was strongest. ... -
8
Cortex Beacon
Ham Radio QRP(P) Beacon on Cortex-M3 MCU from STMicroelectronics.
TODO -
9
Modbus Master/Slave industrial terminal
Remote industrial terminal indicator to the control of Modbus-RTU on A
Remote industrial terminal indicator to the control of Modbus-RTU on Atmega128. Publication of "MODBUS on a leash. Remote industrial indicator. - Radiolybitel, Minsk, 2009, № 7, p.46" (series of articles http://radioliga.com). Project for IAR. -
Build Securely on Azure with Proven FrameworksMoving to the cloud brings new challenges. How can you manage a larger attack surface while ensuring great network performance? Turn to Fortinet’s Tested Reference Architectures, blueprints for designing and securing cloud environments built by cybersecurity experts. Learn more and explore use cases in this white paper.
-
10
Voice over IP (VoIP) software specifically for ham radio operators. The primary purpose is to use the Internet to link Ham repeaters with a secondary purpose of providing remote access for users. Compatibility with EchoLink and IRLP is a goal.
-
11
Rigserve implements a human-readable control language for remote or local IP access to amateur radio equipment (rigs). A Python class library allows interfacing with a large number of rig types via serial ports or other methods.
-
12
With UnidenCommander (UC) you can remote control Uniden Bearcat radio scanners through a RS-232 connection. UC currently supports the Uniden UBC785XLT scanner, and support for the UBC780XLT is in an experimental state.
-
13
Simple Lossless Ad-hoc Protocol (SLAP) is designed to be used for wireless digital data transfer on embedded systems. The program is built for uClinux, a derivative of Linux designed for embedded microcontrollers, but can be easily ported.
-
14
Java libraries implementing RCIP Remote Control Interface Protocol and PCIF CCDump Monitoring for the GRE PSR-500, PSR-600 and Radio Shack PRO-106, PRO-197 Advanced Digital Trunking Scanners.
-
15
EMCAR
Antenna Measurement Range Using LinuxCNC
Enhanced Machine Controller-based Antenna Range (EMCAR) EMCAR employs LinuxCNC based machine control (linuxcnc.org) coupled with open source software to implement a measurement system for antenna radiation pattern data (i.e. an antenna range). -
16
Software For controling and programming the SC230 Uniden handheld Scanner with remote managment support, For personal use and Webbased control.
-
17
Bored of all those same old songs, get TINAR, let your friends connect and listen to their playlists! Currently just functions as a xmms remote control with multiple clients, but new releases will make it a full blown p2p radiostation. (c++/gtkmm)
-
18
CB3ROB-AX25-TOOLS-LINUX
Some stuff to make AX.25 actually work across your networks.
AX.25 protocol (packet radio and APRS) interface / bridging / switching / terminal related software for Linux. Have your bpq ethernet/wifi connected terminals talk to each other or stations on the radios transparantly. connect from home with KISS-TCP. link your remote AX.25 network segments together with KISS-TCP vpns etc. oh and get a linux terminal login over your normal every day packet radio terminal software. all the stuff that was missing from the start. ;P note that we don't use for /etc/ax25/axports -at all- and think it should disappear as it makes no sense to have callsigns and mtu's and stuff on an interface, in a config file, AND in a program. whatever info is needed should just be obtained from the interface. like with any other protocol stack (you also don't have to put your ip address in your webbrowser, a seperate file in /etc, and the interface) (so there is also no need to install those old ax25-tools - just the kernel suffices)
- Previous
- You're on page 1
- Next
