Search Results for "pc-equalizer"

Updated 2026/01/24: Turn your PC into the ultimate shortwave radio. Skywave Linux is an X86, 64 bit live environment configured for accessing internet accessible software defined radio receivers. With this operating system, you may tune in popular stations or amateur radio, aeronautical, maritime, or other signals received at remote internet servers around the world.

...The latest 2022 release for GNU Radio 3.9 and 3,10, following 3.8 named ng for New Generation, aims at adding bitrate clock tracking + removes the external dependence with libfftw by using the GNU Radio FFT wrapper. Doing so, multiple ACARS decoding blocks can run in parallel. Compile for x86 PC with: cd 3.10ng mkdir build cd build cmake -DCMAKE_INSTALL_PREFIX:PATH=/usr .. make -j4 sudo make install (developed and tested on Debian GNU/Linux) Compile for RaspberryPi4/Buildroot (located in BR_PATH): cmake -DCMAKE_INSTALL_PREFIX:PATH=$BR_PATH/output/target/usr -DCMAKE_TOOLCHAIN_FILE=$BR_PATH/output/host/share/buildroot/toolchainfile.cmake ../ make -j4 make install

This project is no longer actively developed on SourceForge. Its development has been fully moved to https://github.com/acerion/cwdaemon on 2024.08.03. ------ cwdaemon is a small daemon which uses the PC parallel or serial port and a simple transistor switch to output morse code to a transmitter from a text message sent to it via the udp internet protocol. The program uses the soundcard or PC speaker to generate a sidetone. Current version of cwdaemon is 0.12.0, it has been released in May 2023. Source code for cwdaemon is available on github: https://github.com/acerion/cwdaemon

...With this service you can exchange QSL with other ham radio and when you want, you could access to the web portal and see you eQsl. However a missing point is that you can't download all the eQsl on your local pc at the same time. If you want to download all eQsl, you have to select each eQsl and download it... and waste many time. With this add-on, you can download all your eQSLs in one shot!

...The SDK provides the following basic functionalities: • Graphic display • Keypad • Buzzer • USB (Mass Storage Driver) • DDS • Timer • ADC driver • FAT file system • Sample application In addition the SDK provides a device simulator for developing the application on the PC, intended mainly for the development of the user interface of the application. This simulator requires the Microsoft Visual Studio (Visual C++) programming environment.

...The KA9Q NOS TCP/IP package began life way back in 1985 on a surplus Xerox 820 computer board running CP/M with a 4 MHz Zilog Z-80 CPU, 64KB of RAM and a 8" floppy drive holding all of 243KB. Later, it moved to the IBM PC with the 8088 and 80286 CPUs running MS-DOS. KA9Q NOS was only the second known implementation of the Internet protocols for low-end computers. Unlike PC/IP, KA9Q NOS could simultaneously act as an Internet client, a server and an IP packet router, and handle multiple client and server sessions. KA9Q NOS attracted many contributors and became widely used throughout the 1980s and 1990s in amateur packet radio and various educational projects. ...

Kontakt is a user-friendly graphical interface to the hamlib, which lets you control your hamradio rigs from your PC.

This project aims to port the NOKIA Wireless LAN Software for the NOKIA C110/C111 Wireless LAN PC Cards to KDE.