Showing 20 open source projects for "output"

View related business solutions
  • Full-stack observability with actually useful AI | Grafana Cloud Icon
    Full-stack observability with actually useful AI | Grafana Cloud

    Our generous forever free tier includes the full platform, including the AI Assistant, for 3 users with 10k metrics, 50GB logs, and 50GB traces.

    Built on open standards like Prometheus and OpenTelemetry, Grafana Cloud includes Kubernetes Monitoring, Application Observability, Incident Response, plus the AI-powered Grafana Assistant. Get started with our generous free tier today.
    Create free account
  • Gemini 3 and 200+ AI Models on One Platform Icon
    Gemini 3 and 200+ AI Models on One Platform

    Access Google's best plus Claude, Llama, and Gemma. Fine-tune and deploy from one console.

    Build, govern, and optimize agents and models with Gemini Enterprise Agent Platform.
    Start Free
  • 1
    HackRF

    HackRF

    Low cost software radio platform

    This repository contains hardware designs and software for HackRF, a low-cost, open source Software Defined Radio platform. HackRF One from Great Scott Gadgets is a Software Defined Radio peripheral capable of transmission or reception of radio signals from 1 MHz to 6 GHz. Designed to enable test and development of modern and next-generation radio technologies, HackRF One is an open-source hardware platform that can be used as a USB peripheral or programmed for stand-alone operation. HackRF...
    Downloads: 45 This Week
    Last Update:
    See Project
  • 2

    qsoLog by KD7KDO

    Manual QSO log entry/editing program using PYTHON3

    qsoLog is a program written by KD7KDO for logging conversations between amateur radio (HAM) operators and storing a record of these conversations in a qsoLogBook which conforms to the ADIF 2.0 specification and the output file qsoLogBook may be uploaded t
    Downloads: 0 This Week
    Last Update:
    See Project
  • 3
    70cm-ham-radio-fox-hunt-receiver

    70cm-ham-radio-fox-hunt-receiver

    70cm Amateur Radio Fox Hunt CW receiver - Heltec V3 ESP32 LoRa Board

    ...CODE FOR THIS PROJECT HAS NOW BEEN RELEASED. Download the Arduino Sketch from the Files section. 18/5/26 - I've just released the code for Version 2 which now has audio output. https://youtube.com/shorts/7QMwPYFFLZA If you are new to ARDUINO, then please download the 'Quick Start Guide' from the File section.
    Downloads: 23 This Week
    Last Update:
    See Project
  • 4
    gr-acars

    gr-acars

    ACARS decoder for GNURadio, for RTL-SDR, PlutoSDR or UHD receivers.

    ...make -j4 sudo make install (developed and tested on Debian GNU/Linux) Compile for RaspberryPi4/Buildroot (located in BR_PATH): cmake -DCMAKE_INSTALL_PREFIX:PATH=$BR_PATH/output/target/usr -DCMAKE_TOOLCHAIN_FILE=$BR_PATH/output/host/share/buildroot/toolchainfile.cmake ../ make -j4 make install
    Downloads: 0 This Week
    Last Update:
    See Project
  • Try Google Cloud Risk-Free With $300 in Credit Icon
    Try Google Cloud Risk-Free With $300 in Credit

    No hidden charges. No surprise bills. Cancel anytime.

    Use your credit across every product. Compute, storage, AI, analytics. When it runs out, 20+ products stay free. You only pay when you choose to.
    Start Free
  • 5
    echoes

    echoes

    Echoes is a radio spectral analysis software for SDR devices

    ...Echoes doesn't demodulate neither decode any human-made signal. Its main goal is to analyze and record the total power of natural signals and generate screenshots and tabular data (CSV,) output in presence of particular peaks in a selected narrow range of frequencies. Since there is no demodulation, there is no provision for audio listening, except for a notify sound when an event has been recorded. Finally, Echoes can also operate getting an audio input, thus producing audio spectra. This way, Echoes can also be used with traditional receivers.
    Leader badge
    Downloads: 33 This Week
    Last Update:
    See Project
  • 6
    ...This updated version will also automatically generate an adi file for multi-park (n-fer) activations by listing all park numbers separated by a comma-separated (e.g. US-1234, US-23456,US-5669). The output adi file(s) also include the new adi fields of MY_POTA_REF, and POTA_REF for each QSO record in the log.
    Downloads: 1 This Week
    Last Update:
    See Project
  • 7
    Morse Key Express

    Morse Key Express

    Converts text to Morse sounds

    This is a simple application that converts text to Morse code and audio. It has minimal dependencies and is very lightweight. It does not yet offer the ability to transcribe Morse code and save the output to an audio file. It's a useful tool for amateur radio operators and radio operators. https://github.com/shampuan/morse-key-express
    Downloads: 0 This Week
    Last Update:
    See Project
  • 8

    IO91pm

    Command-line calculator for Maidenhead- (QTH-, QRA-) Locators.

    Keywords: Hamradio, Radio-amateurs, Maidenhead-, QTH-, (QRA-), Locator, Distance and Bearing Calculator, GNU/Linux command-line, LaTeX,- UTF-8-, ASCII-output, GPLv3; based on GM4ANB's book. "IO91pm is the Maidenhead-Locator for Maidenhead" ========================================= Background --------------- * For another little project, I wanted a QTH-Locator calculator for the UNIX (GNU/Linux, bash) command-line. * There are many, some very good, online QTH resources, but I wanted something that would work off-line...
    Downloads: 0 This Week
    Last Update:
    See Project
  • 9
    Filt8- v3.6 alerts for WSJT-X FT8

    Filt8- v3.6 alerts for WSJT-X FT8

    Alert and filter QSO for WSJT-X FT8 FT4

    ...Offline Maps to show station grid locations as you decode them in real-time (Check out js8mapper project on https://sourceforge.net/projects/js8map/ for this same option for JS8Call) Map feature allows filtering by band, listings by callsigns or grids, and callsign lookups via QRZ or HamCall (this requires Internet). Filters & alerts WSJT-X FT8 and FT4 output for Mac/Linux/Win. Like JTAlert but minimalist and cross-platform. Works on low end systems such as Raspberry PI or laptop with minimal config, no internet required. Written in Python Problems? Email us at snitch.lyric0z@icloud.com
    Downloads: 3 This Week
    Last Update:
    See Project
  • MongoDB Atlas runs apps anywhere Icon
    MongoDB Atlas runs apps anywhere

    Deploy in 115+ regions with the modern database for every enterprise.

    MongoDB Atlas gives you the freedom to build and run modern applications anywhere—across AWS, Azure, and Google Cloud. With global availability in over 115 regions, Atlas lets you deploy close to your users, meet compliance needs, and scale with confidence across any geography.
    Start Free
  • 10

    linSmith

    Smith chart intended for educational use

    A Smith charting program. You can enter either discrete components or transmission lines, see the results on screen and/or generate Postscript output. Component values can be changed numerically or using scrollbars.
    Leader badge
    Downloads: 3 This Week
    Last Update:
    See Project
  • 11

    cwdaemon

    morse daemon for the serial or parallel port

    ...Its development has been fully moved to https://github.com/acerion/cwdaemon on 2024.08.03. ------ cwdaemon is a small daemon which uses the PC parallel or serial port and a simple transistor switch to output morse code to a transmitter from a text message sent to it via the udp internet protocol. The program uses the soundcard or PC speaker to generate a sidetone. Current version of cwdaemon is 0.12.0, it has been released in May 2023. Source code for cwdaemon is available on github: https://github.com/acerion/cwdaemon
    Downloads: 2 This Week
    Last Update:
    See Project
  • 12
    gpsfeed+

    gpsfeed+

    A software gps simulator

    A software gps simulator, providing TCP/IP, UDP, http and serial port connectivity in NMEA 0183, XML or user defined output format. Usable for testing all kinds of GPS applications. Can playback pre-recorded GPS files with NMEA output.
    Leader badge
    Downloads: 30 This Week
    Last Update:
    See Project
  • 13
    NarrowBand DataTrans

    NarrowBand DataTrans

    Data transmission through low-tech communication media

    Set of executable files for sending and receiving data / short multimedia files through a narrow bandwidth transmission media. The signal output to the transmitter is the sound card analog output socket while the received signal taken from the receiver is fed to a sound card analog input line. Targeted audience: * Short wave / long wave (narrow bandwidth) Amateur Radio enthusiasts * Experimenters of vintage transmission systems * People living in areas with absolutely no Internet and no 3G/4G/Edge access (only analog telephone or CB radio), so that peer-to-peer data sharing (or even broadcast to several peers at a time) are made possible...
    Downloads: 0 This Week
    Last Update:
    See Project
  • 14

    learnmorse

    Trainer helping people learn Morse code in an easy (and fun) way

    ...It will offer different ways to learn morse code: - contest style (radiograms with 5 character groups transmitted at increasing speed) - free text transmission - sending information from different sources (web sites, files, executable output, etc) The application will generate a PCM sound that will be played via the sound card. It will act as a Morse trainer and can easily be adapted to every need
    Downloads: 0 This Week
    Last Update:
    See Project
  • 15
    fun2audio

    fun2audio

    Funcube Dongle Pro+ Data Capture & Audio Output

    Various reference programs to read baseband I/Q sample data from a Funcube Dongle Pro+ (FCDPP) software defined radio (SDR) hardware front end, demodulate the data stream and send it to the host's audio output port. Programs are present to demodulate AM, CW, FM and SSB (USB, LSB) streams. Also included is a program that writes FCDPP sample data to its standard output (stdout) port. The programs require the qthid program to control the FCDPP frequency and gain (also available at sourceforge.net. Search for: qthid). Recent activity (10/2014): Added test programs used to construct fun2ssb. ...
    Downloads: 0 This Week
    Last Update:
    See Project
  • 16
    Codegroup

    Codegroup

    A Java application for transferring computer files in 5 letter groups

    Codegroup is a Java application that will allow one to convert binary (or text) computer files in to 5 letter codegroups for transmission over email, landline telephones, radioteletype or Morse Code. Codegroup has internal error correction & limited cryptography capabilities. Codegroup : ZZZZZ YBPIL AIAIG FMOPP CPAAA DGNGP GPGPA ADNJN ELJKO ELIMO GEOHF KIFGP IFBCB PKCPI YJMHE PHBHP PPOBH NCOHD AKLLL AGHFP DEGEF LKELC EAIJI ABAGP AHPPO IHHPH OHPDF YNFPB ALEPO KMPKP Once this...
    Downloads: 0 This Week
    Last Update:
    See Project
  • 17

    KB1OIQ - Fl_MoxGen

    Compute Moxon Rectangle antenna dimensions

    Fl_MoxGen is a program which will compute the dimensions of a Moxon Rectangle antenna when given the desired frequency and diameter of the construction material (typically wire). It also generates PDF and xnec2c outputs. Please note that this software is also distributed within the "Andy's Ham Radio Linux" software collection.
    Downloads: 1 This Week
    Last Update:
    See Project
  • 18
    GNU AIS is software for demodulating and decoding Automatic Identification System messages used by ships to navigate. You will need a VHF receiver with discriminator output to get it to work.
    Downloads: 1 This Week
    Last Update:
    See Project
  • 19

    elbug - electronic keyer at serial port

    elbug - simple c program for electronic morse key at the serial port

    a simple c program for an serial elbug = electronic morse key.which is to be plugged to the serial port, its output is also a pin in the serial port. Just compile it by 'gcc elbug.c -o elbug' or use the ready-compiled file and copy elbug to user/local/bin. /* Call it as root. */ How to cable your homebrew elbug? Middle pad: +9V battery via Resistor 2k Left contact: -> DCD (9-pin plug: 1) (25-pin plug: 8) Right contact: -> CTS (9-pin plug: 8) (25-pin plug: 5) Ground: -pole battery (9-pin plug: 5) (25-pin plug: 7) /* by Günther Montag , ex- dl4mge now maintained by Patrick Strasser OE6PSE (trapicki) now actual version also at https://github.com/trapicki/elbug */
    Downloads: 0 This Week
    Last Update:
    See Project
  • 20
    Convert text to International Morse Code. Input is ASCII text. Output can be: - . -..- - on the console, raw 8bit PCM suitable for piping to /dev/audio, .wav files or even (mp3|ogg). Good for headlines on your MP3 player or code practice.
    Leader badge
    Downloads: 3 This Week
    Last Update:
    See Project
  • Previous
  • You're on page 1
  • Next
MongoDB Logo MongoDB