Search Results for "linux device driver project"

Arduino Mega 2560 Code with a standard Ethernet Shield that drives Relays to control a MFJ-993b Autotuner remotely. Supports Up and Down for manual L and C Tuning, Autotune On/Off, Antenna Selection 1/2 and 100ms Short /1000ms Long for Tune. Op Note 1: You may need additional power for the 5V relay board; sometimes you can power the 5V relay board from the Mega 2560 - but reset/start the device first and then connect power to the relay board. Op Note 2: You will need determine...

The SARK110 SDK allows the development of user applications for the device or using the device as a platform for experiments. The SDK provides the following basic functionalities: • Graphic display • Keypad • Buzzer • USB (Mass Storage Driver) • DDS • Timer • ADC driver • FAT file system • Sample application In addition the SDK provides a device simulator for developing the application on the PC, intended mainly for the development of the user interface of the application....

A CW beacon implemented in C language on a AVR AtTiny13A microcontroller (1KB flash!). Include a CW parametric modulator/keyer, an emulated I2C periferal and a device driver in order to handle the Si570 oscillator by Silabs. You can personalize the transmitted message and the morse speed (in WPM). In the example the beacon is IQ6MC/B JN63RH @ 144.450MHz. Enjoy this example and if you will appreciate it, please sens me a feedback! IW6DFW, Maurizio