Search Results for "code::block"
Sort By:
Showing 43 open source projects for "code::block"
View related business solutions-
Outgrown Windows Task Scheduler?Windows Task Scheduler wasn't built for complex, cross-platform automation. Get a free diagnostic that shows exactly where things are failing and provides remediation recommendations. Interactive HTML report delivered in minutes.
-
AI-generated apps that pass security reviewRetool lets you generate dashboards, admin panels, and workflows directly on your data. Type something like “Build me a revenue dashboard on my Stripe data” and get a working app with security, permissions, and compliance built in from day one. Whether on our cloud or self-hosted, create the internal software your team needs without compromising enterprise standards or control.
-
1
Skywave Linux
Global Software Defined Radio at Your Fingertips
Updated 2026/01/24: Turn your PC into the ultimate shortwave radio. Skywave Linux is an X86, 64 bit live environment configured for accessing internet accessible software defined radio receivers. With this operating system, you may tune in popular stations or amateur radio, aeronautical, maritime, or other signals received at remote internet servers around the world. For a live map of the best KiwiSDR and WebSDR servers and a nice "click to tune" interface, Use the installed SDR-Map... -
2
MSHV
MSHV Amateur Radio Software
...IDE recommended QDevelop 0.29. All other libraries included inside the source. Acknowledgements to K1JT Joe Taylor and WSJT Development Group. The algorithms, source code, look-and-feel of WSJT-X and related programs, and protocol specifications for the modes FSK441, FT8, JT4, JT6M, JT9, JT65, JTMS, QRA64, ISCAT, MSK144, are Copyright © 2001-2017 by one or more of the following authors: Joseph Taylor, K1JT; Bill Somerville, G4WJS; Steven Franke, K9AN; Nico Palermo, IV3NWV; Greg Beam, KI7MT; Michael Black, W9MDB; Edson Pereira, PY2SDR; Philip Karn, KA9Q; and other members of the WSJT Development Group. -
3
WSJT-Z
WSJT-X fork by SQ9FVE
...Latest installers can be downloaded here: https://sourceforge.net/projects/wsjt-z/files/Packages. Licensed under GNU GPL v3: https://www.gnu.org/licenses/gpl-3.0.txt. Most of the code is created and copyrighted by the WSJT-X team, led by Joe Taylor K1JT. Previously known as WSJT-X SQ9FVE Full-Auto Mod, WSJT-Z supports FT8, FT4, JT*, and WSPR. Note: Always monitor your transceiver while using WSJT-Z, unless automated operation is permitted in your location. -
4
unixcw
Morse code library and applications for GNU/Linux
Umbrella project for cw, cwcp, xcwcp, cwgen programs, and for libcw library. -
Our Free Plans just got better! | Auth0You asked, we delivered! Auth0 is excited to expand our Free and Paid plans to include more options so you can focus on building, deploying, and scaling applications without having to worry about your security. Auth0 now, thank yourself later.
-
5
Morse Key Express
Converts text to Morse sounds
This is a simple application that converts text to Morse code and audio. It has minimal dependencies and is very lightweight. It does not yet offer the ability to transcribe Morse code and save the output to an audio file. It's a useful tool for amateur radio operators and radio operators. https://github.com/shampuan/morse-key-express -
6
gr-acars
ACARS decoder for GNURadio, for RTL-SDR, PlutoSDR or UHD receivers.
A "simple" demonstration software for decoding ACARS, a low-bandwidth communication protocol used by airplanes to communicate with airports. Detailed description of the operating principles is available at http://jmfriedt.free.fr/lm_sdr.pdf (French) and http://jmfriedt.free.fr/en_sdr.pdf (English). The latest 2022 release for GNU Radio 3.9 and 3,10, following 3.8 named ng for New Generation, aims at adding bitrate clock tracking + removes the external dependence with libfftw by using the GNU... -
7
IO91pm
Command-line calculator for Maidenhead- (QTH-, QRA-) Locators.
Keywords: Hamradio, Radio-amateurs, Maidenhead-, QTH-, (QRA-), Locator, Distance and Bearing Calculator, GNU/Linux command-line, LaTeX,- UTF-8-, ASCII-output, GPLv3; based on GM4ANB's book. "IO91pm is the Maidenhead-Locator for Maidenhead" ========================================= Background --------------- * For another little project, I wanted a QTH-Locator calculator for the UNIX (GNU/Linux, bash) command-line. * There are many, some very good, online QTH resources, but I wanted... -
8
MATTA
Morse Code Utilitiies to convert text messages to & from sound files.
This is a commandline utility that converts a WAV sound file containing morse code to English text. Pre-built binaries run on OSX, MsWindows, & GNU/linux. It is written in Ada, so can be rebuilt on any platform with an Ada compiler. The input wav file must be monaural, with a 16-bit signed integer encoding, and a sample rate of 8000 Hz. Either sox or audacity can easily transform to this format. The wav file is expected to be international morse code, preferrably clean and properly spaced. ... -
9
cwdaemon
morse daemon for the serial or parallel port
...Its development has been fully moved to https://github.com/acerion/cwdaemon on 2024.08.03. ------ cwdaemon is a small daemon which uses the PC parallel or serial port and a simple transistor switch to output morse code to a transmitter from a text message sent to it via the udp internet protocol. The program uses the soundcard or PC speaker to generate a sidetone. Current version of cwdaemon is 0.12.0, it has been released in May 2023. Source code for cwdaemon is available on github: https://github.com/acerion/cwdaemon -
Atera all-in-one platform IT management software with AI agentsAtera’s AI agents don’t just assist, they act. From detection to resolution, they handle incidents and requests instantly, taking your IT management from automated to autonomous.
-
10
MFJ-993b Web Remote
Arduino Mega 2560 + Ethernet Shield to Drive 8 Relays for MFJ-993b
Arduino Mega 2560 Code to that supports a standard Ethernet Shield . i.e. Drive Relays hence outputs to MFJ-993b. Supports Up and Down for manual L and C Tuning, Autotune On/Off, Antenna Selection 1/2 and 100ms Short /1000ms Long for Tune. Op Note 1: You may need additional power for the 5V relay board; sometimes you can power the 5V relay board from the Mega 2560 - but reset/start the device first and then connect power to the relay board. -
11
gr-message_to_serial
GNURADIO OOT block
Block that receives a " message" and send string values over serial connection, to control hardware devices ( switch ), for example, via Arduino based controller ( see https://sourceforge.net/projects/ardu-switch/ ) Prerequisite: pyserial Build as usual for a Gnuradio block: - download and unpack - cd gr-message_to serial - mkdir build && cd build - cmake .. && make - sudo make install && ldconfig If successful this block is into OOT section... ... -
12
Morse code decoder
Morse code decoder.
A graphical (Gnome) based Morse code decoder capable of decoding Morse code from audio that is captured via a sound card device. -
13
JTSDK
Build Systems for WSJT Applications
JTSDK is a pre-configured collection of open source cross platform development frameworks, Gnu tools, libraries and custom written scripts designed to ease compiling WSJT applications and documentation from source code. WINDOWS APPLICATIONS ---------------------------------------------------------------------- * JTSDK-QT.......: WSJT-X, WSPR-X and MAP65 * JTSDK-PY........: WSJT and WSPR * JTSDK-DOC....: All WSJT Documentation * JTSDK-MSYS..: General Compiling LINUX APPLICATIONS ------------------------------------------------------------------ * JTSDK-Nix.......: WSJT, WSJT-X and WSPR -
14
MORSELIZER - morse with Arduino
A non blocking morse training software for Arduino
An asynchronous Text to Morse Converter and Morse training software for Arduino Uno, based on interrupts and Timer1. And because it doesn't use that evil delay() function, this solution morselizes random letters or whatever it receives through its serial() interface, in a non blocking manner. https://github.com/vicival/morselizer -
15
XASTIR
Multiplatform Ham Radio APRS and Mapping Program
NOTE: Code commits are FROZEN on SourceForge: New code is now at <http://github.com/Xastir/Xastir>. Real-time tracking & messaging of stations via radio/internet APRS data streams, w/125 map formats supported. Linux/FreeBSD/Solaris/MacOSX/Windows in any of 7 languages. Can also be used for mobile mapping w/GPS. MAILING LISTS ARE AT: PROJECT->WEB SITE. -
16
Transistor Specifications
50 most common transistor specs
The specifications and information for the 50 most common transistors used in small electronic circuits, robots, and prototyping. -
17
Is Morse-Code on the way to die? Of course, if not used anymore... To increase the amount of Morse code transmissions, automatic stations are needed, processing interesting texts and transmitting them for human ears: Morse-Code Broadcasting!
-
18
dmodem
dmodem
High performance acoustic softmodem employing multi-carrier modulation (OFDM). Initial code is based on the Dream DRM receiver. -
19
learnmorse
Trainer helping people learn Morse code in an easy (and fun) way
The purpose of this software is to help people that want to learn Morse code. It aims to be simple and easy to use. It will offer different ways to learn morse code: - contest style (radiograms with 5 character groups transmitted at increasing speed) - free text transmission - sending information from different sources (web sites, files, executable output, etc) The application will generate a PCM sound that will be played via the sound card. -
20
Codegroup
A Java application for transferring computer files in 5 letter groups
Codegroup is a Java application that will allow one to convert binary (or text) computer files in to 5 letter codegroups for transmission over email, landline telephones, radioteletype or Morse Code. Codegroup has internal error correction & limited cryptography capabilities. Codegroup : ZZZZZ YBPIL AIAIG FMOPP CPAAA DGNGP GPGPA ADNJN ELJKO ELIMO GEOHF KIFGP IFBCB PKCPI YJMHE PHBHP PPOBH NCOHD AKLLL AGHFP DEGEF LKELC EAIJI ABAGP AHPPO IHHPH OHPDF YNFPB ALEPO KMPKP Once this program has a graphical user interface, an Enigma like subsystem must be devised for data whitening. ... -
21
AVR beacon
A hamradio beacon project on an AVR MCU
...It is mainly used by the hamradio operators to set up various radio beacons for different purposes, mostly for radio waves propagation discoveries. CW (continious waves, Morze code) is a main modulation mode. Other modes like PSK and FSK are planned to implement in the future releases. User can enter any ASCII text to send it to the air. Transmission rates and modes are configurable from the input text. AVR beacon can read an external digital instruments like (voltmeter, thermometer, axelerometer, anemometer, etc.) and send its data to the air. ... -
22
...How to install: Download the binary package, flash main.hex file into Flash memory and main.eep into EEPROM using AVRdude. For more details and documentation please retrieve the latest complete source code from the SVN repository. Suggestions, feature requests and questions are appreciated!
-
23
-
24
cwtbk
Decode incoming CW (Morse Code) signals
Morse Code (CW) decoder for Unix-like systems (and Windows). -
25
A prototype input method for OCZ's NIA headset allows full text entry. It is based on Morse Code (3 keystrokes generated from the NIA software) and can produce full English text with all ASCII symbols, uppercase and lowercase.
