Search Results for "sd"

A collection of tools to assist the recovery of files from a corrupt memory card. Initial aim of this project was to recover photographic jpeg and avi files from a corrupt SD card. However, the tools might be usable in other situations. Current project is fairly rough and may need some adjustment to the source code to work for specific cases.

The replacement for standard Arduino SD (Secure Disk) library

SLFS is a implementation of log-structured file system designed for flash memory based storages(SSD, SD card, eMMC, …). Like other log-structured file systems, SLFS shows good performance under random write. <Build> 1. deploy SLFS source code at your Kernel Source # tar xzf slfs.tar.gz # mv slfs KERNEL_SRC/fs/. # vi KERNEL_SRC/fs/Makefile (add following line) obj-$(CONFIG_SLFS_FS) += slfs/ # vi KERNEL_SRC/fs/Kconfig (find section “MISC_FILESYSTEMS” and add following line) source "fs/slfs/Kconfig" 2. build Linux Kernel # cd KERENL_SRC # make menuconfig (check SLFS as a module or built-in) # make && make modules_install Note. ...

This project aims to provide (initially) read acces of FAT16 formatted MMC/SD cards for Microchip PIC 18-series

This project is about using a SD-card together with an ATMEL ATmega32 microcontroller as mass storage medium. It implements the interface to the SD-card, a simplified FAT16 filesystem and a sample application: a data logger.

Library for filesystems intended to be used in embedded projects. The library currently supports FAT12/16/32 reading & writing on SD-cards, and is easily expandable for use with other devices on any platform.

A combined hardware/software project to provide MMC/SD card reading/writing facilities to any device with an RS232 serial port. Intended initially for Palm devices with no built in storage expandability (III series, V series etc.).